To answer the question “Should I worry about electrical repairs in a new home?” we need to specify what new means. Was the house built recently? Or is it “new” because it is new to you, regardless of its age? In either case, there is a simple rule to follow: if you think you need electrical repairs, you probably do—no matter how old the house is. Always worry about electrical repairs if there are signs that you need them.

When you move into any home built more than 10 years ago, you should hire an electrician to check the system for problems. Despite surface appearances, a home may have wiring troubles from DIY repair attempts from a previous owner; you want to make sure there are no serious problems that need immediate repair to prevent safety hazards.

With a home built pre-1970, you may encounter difficulties from an electrical system that cannot support modern demands. Check on the outlets and the circuit breaker panel. If the home has two-prong outlets and a fuse box instead of a circuit breaker panel, you should have new installations done to upgrade the system. Otherwise you may end up with some major repair worries in the near future. Older circuit breaker panels are often not up to the task of contemporary power needs. If you experience frequent blown fuses or tripped breakers, have a repair technician investigate right away.

With a recently-built house, you shouldn’t have many concerns about your power needs: the home should have sufficient wiring, updated GFCI outlets, and a new circuit breaker panel. However, you can’t simply go lax about small signs of difficulties or indications of improper electrical installation. Look for flickering lights that indicate small power surges. Although these rarely trip circuit breakers, they can cause damage to appliances over time. Call for a repair technician to see if your new home will benefit from a whole-house surge protector.

Check around your ceiling fixtures on occasion to see if they are growing hot. This indicates poor electrical insulation and sometimes occurs in new homes due to poor installation. If you detect poor electrical installation problems in one place in your home, they probably exist elsewhere; call for an electrician to examine your home’s electrical system thoroughly for faults.

We’ve seen LED rope lights transform a staircase handrail, and accent outdoor This homeowner created an inspiring word art installation on the wall of her son’s playroom. She used the screw-in mounting clips that come with the product for wall hanging.

One great tip for a project like this is to place weights (or other heavy objects) on top of your rope light to shape it properly. Often our customers say that Image via www.prettyhandygirl.com

2. A Crocheted LED-Lit Rug:  This one blew us away! The single strand of LED rope lighting was crocheted into a generic spiral pattern to create this rug. For anyone who wants to emulate, the original Image via www.wonderhowto.com

3. A Backlit Bedroom Headboard:  Image via www.removeandreplace.com

Where are you seeing LED rope lighting used lately?

You’re on top of grounding your children, but are you familiar with grounding your home? It improves the safety of your home as well as increases the life of your electronics, and who doesn’t want that? Mr. Electric has all you need to know in order to have your home properly grounded.

Electricity likes to travel the path of least resistance. When there’s too much of it, it needs somewhere to go. That’s where grounding comes in. You see, without it, that path of least resistance is your appliances and electronics – and possibly you when you use them. Burn! Zap! Not a good thing.

Since you don’t want your appliances – or you – to take the heat in these situations, a grounding wire is added to your home, offering all that electricity the perfect chance of escape, via a wire attached to your home’s electrical system which is submerged firmly in the ground – the reason it’s called “grounding.” Both your home’s electrical box and your home’s outlets need to be connected to this grounding wire in order to be properly and safely grounded.

Without proper grounding, you and your home could suffer burned out electronics and appliances, electrical fires and potentially deadly electrical shock.

Without special testing equipment, it may be difficult to tell. Just because you have three prong outlets does not mean the outlets – or your home – are properly grounded. These outlets must be properly wired in to your home’s main grounding wire for proper protection. There is also more to grounding than sticking a big metal rod in the dirt, such as properly attaching wires, grounding to your home’s water pipes correctly, and much, much more. If you don’t want your electrical behaving badly, you can ensure it is properly grounded by having it inspected by a licensed, qualified electrician.

Newer homes, as a result of increased safety regulations, are typically properly grounded. Older homes, on the other hand, may not have had a proper grounding experience, or any at all. Homes built before 1950 are especially at risk. You should always have your home, regardless of age, inspected for proper grounding by a licensed, qualified electrician to avoid the potential risks of fire, electrical shock, and property damage. You never know what the previous resident did without a permit.

Don’t suffer the punishment of burnt out electronics or a burned down home. Mr. Electric® will keep you out of trouble – get grounded today!