Energy-efficient residential homes are becoming increasingly popular in Canada which is good news for both the environment and our economy. Having an energy-efficient home also helps Canadians save big on their electricity bills. Expert Electric has been helping homeowners improve their home’s energy-efficiency for many years. For help on how to make your home more energy efficient, here are some actionable steps that you can take.

One of the best ways to make your home more energy efficient has to do with your home’s thermostat. Properly programming your home’s thermostat is essential in saving big on electricity costs. Many people overlook the impact of their home’s thermostat and leave it on all throughout the day, whether they are home or at work. By programming your thermostat to run only during the times when you are home, you will keep your home warm and see a big improvement in cost savings. Always remember to turn your home’s thermostat down when you are not at home. Your wallet will thank you.

Is your home properly insulated? Insulation is important in making your home more energy efficient. Insulation can help keep your home warm during the Winter months and keep your home cool in the Summer. Your home’s insulation is an important investment that can help you save lots of money in the long-term.

Make use of your home’s windows by pulling back the curtains and allowing the natural light to enter during the day. Sunlight is the most energy-efficient source of light in your home because it is free to use.

Making the switch (pun intended) to compact fluorescent lamps (CFLs) or light-emitting diodes (LEDs) can result in big cost-savings for your home. These lights are known to last longer and use up much less energy. Halogen light bulbs are another energy-efficient option for Canadians looking to reduce their electricity costs. Similar to CFLs and LEDs, these light bulbs last much longer than regular light bulbs and require less energy to operate. Make your home more energy-efficient by switching to one of these three types of light bulbs today.

For questions about how to make your home more energy-efficient, please contact Expert Electric today. We offer a variety of different residential and commercial electrical services including standby generator installations, ceiling fan installations, hot tub wiring and more. Call us today at 604-681-8338.

Doing things around the house is a satisfying chore. Sure, it can be a lot of work and it may not have the same finished quality as a professional, but you can still look at the walls you painted, the pavers you put down or the new sod outside and acknowledge you did a great job. Those are all jobs that have some wiggle room when it comes to following the rules. You don’t have to worry too much about your safety or the safety of your home if you made a few minor mistakes. That cannot be said of any of those seemingly little projects around the house that involve electricity. You can’t take the risk of messing with the electrical work in your home if you are not properly trained. You must hire an electrician in Burbank, like those at The Electric Connection.

The risk of you hurting yourself doing something that appears simple, like changing out an old outlet, is very high when you don’t know what you are really doing. It isn’t a time for guess work or “good enough.” It needs to be done right. In fact, if you happen to make a mistake that results in a fire, your homeowner’s insurance may very well refuse to pay the claim. The very fact that the outlet resulted in a fire can be blamed on trying to handle a job that should have been taken care of by a certified electrician. Burbank homeowners don’t need the hassle and stress worrying the DIY job they did is done correctly.

It may seem like an expense you can avoid, but it is always best to be safe than sorry. Hiring a Burbank electrician will give you peace of mind that the job is done right and you can feel safe in your home. The cost of the electrician is well worth it when you look at the grand scheme of things. Give The Electric Connection a call today and schedule any electrical jobs you have been thinking about doing yourself.

If you are interested in learning everything about electricity, you should start by understanding the basic components that make up any electrical design and how they work. Think about how the great pyramids of Egypt were built using just blocks of rock. The rocks themselves were nothing, but when combined with careful design they formed such grand structures!

Similarly, you need to know about the basic electrical components and how they work together to create wonderful modern electrical systems. Below you will find information about the most common electrical components:

The very first component that you should know about is the resistor. It is fairly easy to assume that a resistor, as the name suggests, will resist electricity that flows through it, and you would be correct in that assumption too! Any situation that demands the flow of current to be controlled at a desired level will require a resistor.

Here are two scenarios that better explain what a resistor does. In both cases, we will be turning on a LED:

Scenario 1 – Without Resistor

Scenario 2 – With Resistor

If a resistor is like a cushion that is used to control the flow of electricity, then capacitors are like small rechargeable batteries that store small amounts of charge in them. Capacitors do two things at the same time:

By so doing, they are able to stabilize almost any circuit. There are two types of capacitors that are primarily used:

I briefly alluded to LEDs in the scenarios that were used under “Resistors” above. LEDs are just like bulbs except that they are extremely reliable. You can find them on practically every appliance in your home that features some kind of an indicator light. A typical LED bulb can last decades with no sign of dying.

Since they are so reliable, they are used to indicate the state of current at any point in a circuit. An important task like checking the output voltage or current on a circuit becomes simpler with these light-based indicators.

The resistors, capacitors, and LEDs are the simple stuff in electrical circuits. Now, let us talk about the first complicated component – the transistor. Transistors are used to build complex electrical systems, such as amplifiers for instance. A simple way to understand transistors is to think of a switch. A basic switch has an “on” and an “off” state. These are controlled by the position of the switch, which is changed manually.

A transistor is a more advanced switch that has multiple output states. Unlike a switch, you cannot change these states manually. The only way to switch the transistor between various states is to run current through it. By controlling the current that flows through the transistor, you can control the output state to achieve the results you desire.

Is it driving you crazy to charge all of your devices? Smart phones, tablets, digital music players, digital cameras and more have made many facets of life more convenient, but they come with their own complications and annoyances as well. For one thing, all those devices need their batteries charged, sometimes every day, and it can be quite a pain to keep track of all the cords and adapters. Fortunately, with a little DIY talent or the help of an electrician, you can install combo outlets in your walls with built-in USB ports, making it easier to charge your gadgets wherever you’re at home.

Out with the Old, in with the New

To install a USB outlet, you need to buy an outlet kit from your local hardware store or from an online retailer. You can find various options with two or four USB ports combined with one or two traditional power outlets. If you are comfortable doing simple electrical work, you can probably install the outlet yourself; otherwise, an electrician can do the work and have you up and running quickly.

If you are a DIYer, the first step is to turn off the power to the circuit you are working with. After you turn the switch off at the circuit breaker, make sure you test the outlet with a light or other appliance before you proceed to make sure it doesn't have any current. Next, you'll need to remove the old outlet with a screwdriver and disconnect the wiring. Then, simply connect your new outlet, carefully following the manufacturer instructions. It's extremely important that you reconnect all the wires properly, including the ground wire.

Convenience and Simplicity for Your Devices

Once the new outlet is wired up and screwed into the wall, flip the circuit back on and you should be good to go. Give the new USB outlet a test drive with your phone or tablet, and then sit back and enjoy the convenience and simplicity. Unfortunately, you still need to have an appropriate cord around to take advantage of the USB outlet, but at least you can do away with the cumbersome adapter. That frees up space, since adapters are often so bulky that they cover multiple outlets even though they only use one. Plus, the built-in USB ports limit the electrical current to whatever amount is required to charge the device.

You don't need combo outlets everywhere you have a plug, but if you put them in highly-traveled areas like the kitchen, office and bedroom, you will have easy access to their charging power whenever you need it. Those readers who enjoy perusing their phones in the bathroom can even put a combo outlet by the sink – just make sure you don't get water on your device!

Recharge Your Life with the Help of an Electrician

If you need any help installing or upgrading outlets in your home, call an expert electrician today.