Technology is advancing at a dizzying pace. What used to be the ‘latest’ and ‘most advanced’ devices yesterday becomes redundant today. When people embrace any technology, they do so because it adds convenience, comfort and safety to their lives in one way or the other. When it comes to your home, all these three aspects matter a great deal. It’s why many people are now veering towards the smart home concept.

Sure, many homeowners already have Internet-based security systems and landscape irrigation systems that are connected to timers etc; but smart homes are designed and set up to do much more than that. Having a smart home is a lot about Wi-Fi connectivity and more. Take a look at some concepts; this will help you create a plan for your smart home.

It’s not uncommon for companies that launch smart home products to say that connecting their devices to the Internet is a breeze. Sure, they are bang on spot most of the times, but what actually matters a great deal is the Wi-Fi connectivity in your home. These are some of the things you will have to keep in view while planning your smart home:

This is vital, and it’s something you should keep in view while planning your first smart home. The longer the distance the radio waves have to travel, more the connectivity issues. The best way to overcome this kind of an issue is to install the Wi-Fi router at the center of your property and on the ground floor.

You will find a number of products which claim they are able to extend the Internet connection in your home. The simple fact is that multimedia over coaxial power-line adapters, network extenders etc tend to slow down the signal by around 50% and that reduces the consistency of the network. Of course, you won’t find any issues with driving a motion sensor or a smart bulb; however, you might just find it challenging to stream a movie to your tablet/laptop, only because it can’t figure out which Wi-Fi router it should connect to.

At times, installing a network of Ethernet cables turns out to be the best solution. You can use cable runs to install your smart home hub devices in spots that are more accessible. The devices that are connected to these hubs will function more smoothly if you do this. If your home is already wired for telephones, hardwiring for Ethernet won’t be too difficult. You will need to speak with your electrician and check whether he would be able to run an extra cable to the point you need it at, without too much of drilling and sawing.

When you are planning your smart home, ensure there are sufficient power points at different places in your house. While certain devices may be battery-powered, many aren’t. So whether it’s a Wi-Fi router/extender, web security camera etc, you will need a power point to plug them in. And of course you don’t want power cords dangling all over your smart home.

Very simply put, if you are building a new smart home or remodeling your existing one, sit down and plan not just for the current smart devices you plan to install, but for future ones as well. Map out a detailed plan and get some advice from the installer too. Coming back to the first point – focus on getting a very good Wi-Fi router and ensure its positioned at the right point on your property.

Very importantly, get a professional to do all the wiring work once you have your entire smart home plan in place. For more information about smart home device and hardwiring solutions, call Allround Electrical at 1300 169 263. You can also drop us a line via email or by filling out this contact form.

Thanks for reading,1300 169 263

Radiant heating systems do not have a lot of moving parts, so it they aren’t as prone to breakdown as other systems can be. However, this doesn’t mean that you may not have to repair your radiant heating system. The type of radiant heating system you have – hydronic or electric – helps determine what kind of radiant heat repairs you may need. As with any kind of heating system, it’s always best to hire trained experts for repair. If you are experiencing problems with your radiant system in Brookline, MA, call for an FB Electrical Services expert today!

Electrical Radiant Repairs

Electrical radiant systems use electric cable to heat. The cable can be set into cement, installed to subflooring or be part of an electrically-conductive plastic mat that is installed to subflooring. A couple of common problems that can develop with electric radiant heating are:

We often find there is a lot of confusion between Lumens and Foot Candles and Lux. And even more confusing is how some represent conversion from traditional light sources like Metal Halide and High Pressure Sodium in terms of watts, and not lumens. So why all the confusion. Well, it may be because those who represent this conversion are trying to avoid letting you know about the efficiency of the LED lights, so they claim you can replace X watts of Metal Halide with X watts of LED. What they should really say is that you can replace a 400W Metal Halide with X lumens, and their lights only need Y watts to produce these lumens. We’ll dive into this a little later, but lets first talk about lumens vs foot candles vs lux.

What is a lumen? A lumen is a measurement of light related to (1) fixture or bulb. So when we talk about lumens, we say that a fixture or bulb creates (X) lumens. These lumens are determined by sophisticated measurement equipment.

What is a foot candle? A foot candle is a unit of measurement at a specific location in a room or outdoor location that is created by 1 to many lights. It is a cumulative reading of 1 to many light sources at a specific location. It is both real and calculated. Real in the sense that you can take a light meter and walk to any location in a room or outdoor location and take a reading that represents the amount of light recorded from all contributing lights or fixtures. Calculated in the sense that you can use software to predict the foot candles of a space based on the placement of lights within the simulation.

What is lux? Lux is identical to foot candles. It is a measurement of real or calculated light, but it is done on a different scale. As a rough estimate, 1 foot candle = 10 lux.

So, simply stated, lights produces lumens, and the cumulative lumens of all lights are then determine the foot candle or lux measurement of light at a specific point in an indoor or outdoor space.