If you’re planning on selling your home in Maryland, Virginia, or Washington, DC, it’s extremely important that you make sure everything is up to code. Some code violations are illegal, others can be dangerous—some are both!

Wiring mistakes – most wiring mistakes are made by handymen doing electrical work instead of certified electricians. Among the worst we’ve seen are electrical systems that were hooked up using extension cords instead of dedicated electrical wires!

Overcrowding with too many wires – overcrowding is another sign of a contractor who didn’t know quite what they were doing. Since poorly maintained wires can get hot, any place where there are masses of wires packed tightly together can create a major fire hazard.

Exposed wires or junction boxes – frayed or exposed wires can pose a major electrical safety hazard and should be either replaced or patched up. And while junction boxes should be within reach, they should not be so easily accessible that they can accidentally be touched.

Ground Fault Interrupters (GFI) outlets or breakers not working properly – GFI outlets are especially important for the kitchen, bathroom, and anywhere else where water or humidity could create an electric shock risk. If these outlets are not working properly, you could be in danger without even realizing it!

Mixing line- and low-voltage wires together – the National Electric Code (NEC) expressly forbids this, but we often see it, especially when dealing with HVAC installations.

Light fixture or ceiling fan installed without a junction box – junction boxes are required to be installed so they are always accessible and are used to run multiple conductors in two or more directors. The most common problem we see is junction boxes installed out of reach in a concealed wall or ceiling space.

Missing or damaged switch and outlet covers – plate covers on switches and outlets are important for preventing electric shocks. If you’ve recently painted or remodeled the room, you may have taken the covers off. Make sure you put them back on!

Damaged outlets – damaged outlets can cause appliances and anything plugged into the outlet to malfunction and can also create a major fire risk.

These days, many home sellers are seeing the value of having an electrical inspection prior to putting their home on the market. Having the ability to correct any electrical code violations ahead of time may help in avoiding delays in the negotiation and sales transaction.

If you’re planning on selling your home in Maryland, Virginia, or Washington, DC, call Kolb Electric! We can perform an electrical inspection and make any necessary electrical code corrections. Don’t wait—call us today!

Faulty electrical wiring does not only cause fires but could also result in electrocution if you touch an exposed wire. When unconcealed wires come into contact with combustible materials, they can easily cause fatal fires. You can prevent many deaths caused by faulty electrical wiring by learning some signs of faulty electrical wiring. The main signs include:

One of the most frustrating experiences as a homeowner is having the power go out unexpectedly. Not only does this scenario instantly leave you in the dark, losing electrical service can have drastic effects on your appliances, especially if the power outage is due to a surge or faulty electrical panel. If your power suddenly goes out, here are a few things you can do to protect the appliances and electrical fixtures in your home.

Turn off light switches While it may seem a little silly to turn off lights that are not currently working, turning off the light switches in your home can prevent further damages once the power kicks back on. Grab a flashlight from your emergency supplies and make sure all of the light switches in your residence are switched off.

Call your local electrician If the power has failed in your home, but not in the neighborhood, you’ll need to contact a 24 hour electrician to visit your home and determine the cause of power failure. If you find yourself in need of an emergency electrician in Des Moines, call Electrical Gurus any time of the day or night at 515-446-7040 or contact us online 24 hours a day.

Last night, thousands of walkers and hundreds of runners in Edinburgh kicked off the Courtesy of NVA.org.uk

A bunch of research went in to creating this light up gear to meet the NVA’s head designer James Johnson’s following standards:

For the runners, the design team wanted something dramatic, so they ended up going with concentrated point source LEDs, which looked great both close and at a distance. The LEDs allowed them to mix color and adjust intensity of the lights remotely. The runners themselves had to be in tip-top shape, able to run 10 miles at a 9-10 minute pace in all kinds of weather. Therefore, as to not hinder them in their physical feat, the design team fashioned a webbing suit out of the LEDs, complete with a radio and battery pack. Check them out:

The only shortcoming of these suits was that they couldn’t be powered by the runner’s motion. After attempting to harvest energy via knee braces, they determined any impediment to the runner’s motion dramatically affects his or her performance.

For the walkers, Johnson and his team wanted to build something subtler, to provide adequate safety lighting, but not to distract from the viewing experience. They decided to go with staffs/walking sticks illuminated by a combination of electroluminescent tape, fiber optic fabric, and diffused and non-diffused LEDs. Each staff housed a micro-computer that would synch up the flashing patterns with the Orchestra’s score, with changes triggered by movement and altitude. And here they are:

The research team was able to use motion to generate power in this instance, since walking is a more leisurely, steadier movement. To harness the power of movement, two LEDs, two high power Neodymium magnets, and a copper coil go in the top of the staff, then as the walker strides along, striking the stick against the ground, one of the magnets oscillates through the coil, creating a small electrical current. One LED lights up when the magnet travels down, and the other when the magnet travels up, producing a twinkly effect.

The runners also received a smaller version of this staff in the form of a baton.