Few of us can imagine living without electricity. It’s not an exaggeration to say that it powers our lives, from our heating and cooling systems to our communications networks to our cooking appliances. But electricity can also be a dangerous friend. You don’t want to tackle any but the simplest electrical issues yourself. According to the Electrical Safety Foundation International, more than 55,000 house fires are caused each year by electrical systems installed or worked on by someone who isn’t a licensed electrician.

The secret to keeping your home safe is knowing when to call an electrician and when you can do it yourself.

Even the most modern, well-maintained home or building can have electrical problems. If you’re wondering when to call an electrician, we recommend you pick up the phone when you encounter these issues:

New Electrical Installations

If you’re building a new house, garage, or home addition, it’s important to start with proper wiring. A good electrical contractor will safely wire your home according to local building codes and work with you to understand your needs and how you’ll be using the space—ensuring that the electrical system will address those needs.

If you’re adding a new laundry area to your new addition, for assistance, you’ll want special outlets installed for all of those appliances. Will you be installing wall sconces in your new house? Your electrician can help with that too.

When it’s time to call an electrician for your Montgomery County home or business, there’s only one name you need to know: Kolb Electric! All of our workers are licensed electricians, and we’ve been helping area homeowners like you with their electric needs for nearly 90 years.

Kolb Electric is a full-service electrical contractor, and we are happy to tackle any household or commercial electrical project, from installing a new outlet to rewiring an entire house. We cheerfully offer free, fair estimates as well as 24-hour emergency service, seven days a week. To learn more about how Kolb Electric can solve your electrical needs in the DC metro area, and/or to schedule an appointment for our services, call us at 877 287-1179.

Electrical problems have the potential to cause serious injuries and property damage, and should never be ignored.   What may seem like a minor problem, such as a flickering light or a circuit that repeatedly trips could be an indication of a major problem hidden within the walls of a home or business.

As a facility manager or building owner, it is nearly impossible to know everything about everything in your building. But it is vital to know something about everything, and that goes for your facilities lighting system too. Whether you manage a warehouse, factory, or other industrial sized building or space, the lighting is a huge factor of many things including safety, productivity, and consistency in the work in your facility.

So while you don’t need to know every facility managers and building owners should know about there lighting system and how lighting can make all the difference in various amounts of ways.

1. Not all lights are created equal. This is an obvious one, not all lighting technologies are created the same and all output at different levels. Firstly you have lighting technologies that are less efficient than others. Such as metal halide and HPS which are 2-3 times less efficient than LED technology is. Then you also have efficiency based on a “product to product” basis. For example; while LED is the clear winner in efficiency over metal halide (and really any other lighting technology), one LED product from one company isn’t going to be the same as the next company’s LED product. This is where you really need to dig deep and find the company that offers the most efficient lighting products over all other companies.

Key takeaway? First, understand that LED is the most efficient in a general sense, but also understand that each company and product varies on its own personal efficiency and you should always do your homework before going with one LED product over another!

2. New lighting system upgrade costs can be reduced with rebates. This is only a true statement when you are buying commercially qualified lighting products that are DesignLights Consortium qualified. return on investment overtime by decreased energy costs associated with running your lights. Obviously this ROI period will vary depending on how long you run your lights per day on average, but especially in big facilities they almost always are used often and thus, provide a good and even quick payback period.

4. Create safer environments with a proper lighting system. With low quality light output, you create an unsafe environment that can cause various issues. Lighting fixtures that aren’t outputting the proper amount of light after a few years into there life is all caused reasoning to retrofit over fully replace.

Any building, in any industry, in any area of the world, is susceptible to having potentially hazardous and radioactive exit signs installed throughout their building.

This could mean they are in schools, near your office, or anywhere else where a radioactive setting probably isn’t a desired situation to be in.

This is why we thought it was necessary to create this post to help and guide you towards identifying, removing, and finally replacing your radioactive exit signs with new signs that are much safer and even efficient, saving you money over other alternatives.

Firstly before we can remove and replace these seemingly nuclear exit signs, you have to be able to identify if you have them or not. But before that, lets explain what exactly makes these exit signs radioactive.

How are some exit signs radioactive?

Just the same way as some exit signs are safe, it is all in the way they are built. For some reason, whether it be technology of the time or something else, people assumed it was a good idea to create exit signs with Tritium, also known as 3H or H-3. Tritium is a radioactive isotope of hydrogen, causing exit signs made with this to be radioactive by default. The only seemingly positive upside to these exit signs is that they are non-electrical, meaning they won’t rack up anything in electricity bills.

But before you become alarmed with what we have shared with you so far, tritium emits only a low-energy beta radiation, which in turn causes the sealed glass tube it is in to glow (causing the exit sign to give off the illumination it requires). Thankfully, it is rather well known that this type of radiation can hardly (if at all) penetrate a piece of paper or clothing. So while yes it is a very low level (energy wise) type of radiation, the fact that there are alternatives that will remove radiation entirely from your building is all the reason to uninstall your tritium exit signs and replace them with something more safe, like LED exit signs.

Now that you understand the technology and how tritium in exit signs work a little bit more, let’s go over how exactly you can identify whether or not you have these types of exit signs in your building.

Identifying a radioactive exit sign should be fairly easy. All of these signs are required to have some sort of “Caution of Radioactive Material” warning on the fixture.

If you do find such a warning label, it is safe to say your light is made of tritium. Another tell-tale sign is whether or not your signs are connected to an electrical source or not as tritium signs do not require any such connection.

Once you’ve identified if you have a tritium exit sign or not, if you do happen to have one, you may continue on to removing and replacing it with the alternative exit sign, LED.

As with any lighting fixture, we recommend to bring in a professional contractor to do the job. But as a general guideline, you can typically recycle your tritium signs by returning them to the manufacturer or place of purchase.

If you purchased the building with them pre-installed and are unsure of where they came from after inspection of the signs for any brand markings, you can try two things:

1: Try contacting the previous building owner or collect records of where they were manufactured

2: Recycle them with a third party. like these), buying them, then installing them yourself or with a professional (we recommend a professional).

Here are a few things you should remember and keep in mind when dealing with a building that has radioactive exit signs: