The march of consumer product efficiency continues. Modems, routers and other internet equipment are the latest items to get a bump in energy efficiency thanks to a voluntary agreement between manufacturers and trade associations. The standards mean that new equipment should use about 10 to 20 percent less electricity than the gear currently on the market. The bottom line – reduced energy bills for consumers.

Homes Across the Country

The change is ultimately expected to affect 80 million homes in the United States. Currently, the terms run through 2017 and require manufacturers and providers to make their efficiency data available publicly – ask an electrician if you need help interpreting the data or picking out the best model once the new equipment hits the shelves.

“DOE appreciates industry’s voluntary commitment to improving the energy efficiency of small network equipment, and looks forward to the progress they can make and verification of the impacts at the appropriate time,” Dr. Kathleen Hogan, deputy assistant secretary for energy efficiency, U.S. Department of Energy, said in a press release. 

Preparing for the Internet of Things

The voluntary agreement was hammered out among the Consumer Electronics Association, the National Cable & Telecommunications Association and the companies that make the equipment. This efficiency upgrade comes at a crucial time – not only are modems and routers essential for internet access, they will only become more important as smart technology advances and more of your household systems are hooked up to the internet.

“This agreement will begin saving consumers energy and money – and do so long before any mandatory regulatory standards could take effect – while protecting innovation and competition,” Gary Shapiro, president and CEO of the Consumer Electronics Association, said in a press release. “By setting requirements for energy-efficient broadband equipment now, the agreement will lock-in efficiencies at the dawn of the Internet of Things, which depends on strong broadband networking.”

Following the Cable Box Lead

This agreement is similar to a voluntary deal worked out by manufacturers of cable set-top boxes, in which the companies worked with the U.S. government to set an attainable benchmark. The deals are voluntary out of practicality, because federal regulations can take years to take effect and can be quickly rendered obsolete by ever-advancing technology.

“Our industry has proven that voluntary, energy-conservation agreements are the best means of effectively improving energy efficiency, while recognizing the lightning-fast pace of tech innovation,” Shapiro said.

Similar to the set-top boxes, modems and internet equipment are nearly ubiquitous in U.S. households, and they draw power nearly all the time unless the family pulls the plug at night. That means there's a lot of room for cutting back on their electricity usage. If you aren't sure whether the energy savings are worth upgrading your modem or router, ask an electrician to help calculate your consumption and offer strategies on how to get the best return on your conservation investment.

Frances Ellen Watkins Harper (1825-1911). Her bio is beyond the scope of this entry, but I encourage you to follow the link and check her out. Get a little perspective on life today by reading a paragraph about this amazing human being and poet.

Harper’s poem, “Let the Light Enter,” depicts light in an interesting and fresh way, fresh still, even 100 years after her death. Poetry, generally speaking, is like a vast collection of opportunities to learn about yourself and the world in which you live. I invite you to take a minute to read “Let the Light Enter.”

The Dying Words of Goethe

He just urgently wants to watch the “balmy sunshine/ Play around” his deathbed. He just wants to experience the sensation of light doing it’s thing. “More light!” he demands. It strongly suggests that appreciating and enjoying the beauty of light is what Goethe, a lifelong thinker and poet who lived from 1749 to 1832, finds most worthy of his final precious minutes. That’s a big deal. In choosing between the pleasure of thoughts and the pleasure of the material world, he chooses the latter. It’s like all the things that seem to separate us from the natural world are shown to be false in the final moments. Think of a dog lying on a rock in the sun. Maybe that’s the purest state of being, just lying there, not thinking much, and enjoying the pleasure of the light, the sound of a brook. And maybe that’s why Goethe wants to pass away in such a state.

The MD, DC, and VA area is known for getting slammed with violent and powerful thunderstorms that produce severe lightning. Electrical surges, which are caused by lightning, can wreak havoc on your expensive electronics and appliances.

A lightning strike that hits a power line several miles away from your house can impact all your electronic items. Whole-house surge protection is the best option you have to protect your home electronics and wiring from the damage caused by lightning strikes.

Everyone from the National Fire Protection Association to the Institute for Business and Home Safety recommends the use of whole-house surge protection. As a homeowner, the good news for you is that protection is readily available, and even top-of-the-line solutions are affordable. The gold standard in whole-house surge protection is a two-tiered system—a whole-house surge protective device, or SPD, installed at the circuit breaker box, and plug-in SPDs on individual outlets. A whole-house SPD can protect against up to 40,000 amps of current flowing into your home from the outside; normal household power is between 200 to 300 amps. When an electrical surge occurs as a result of a lightning strike, the device detects the excess current and safely diverts it through the house’s grounding path. Whole-house surge protection provides homeowners in MD, DC, and VA peace of mind when a powerful thunderstorm passes the area.

Whole-house surge protection can typically be installed in a home for around $200—it’s an easy job for a top electrician. The cost of replacing electronic equipment in an average home is a whopping $8,000, and it may be even higher for homes in MD, DC, and VA. Whole-house surge protection is cheap insurance against electrical surges caused by lightning strikes. It provides a layer of protection to all the electronic items in your home.

To ensure complete safety, Kolb Electric recommends that you allow a qualified, experienced electrician to complete the wiring for whole-house surge protection—there are several steps involved that are best left to a professional.

If you require surge protection wiring or want a full whole-house surge protection installation, contact Kolb Electric.

When you see your kid crawling or walking for the first time, it’s monumental. This is something you simply do not want to miss. But as you’re trying to get a snapshot of this wonderful moment, a thought pops into your head: My child can now go anywhere in this home. You now begin to see your home differently. All of a sudden it feels like a danger zone. The loose wires over there. The dangling electrical cords right here. The numerous empty electrical sockets that appear so inviting to tiny hands.  Before you panic, though, let us put you at ease! Follow these simple tips for childproofing your home!

A power surge is an increase in voltage flowing through your electrical units that rise above the standard voltage levels (120 Volts). These surges can be caused by lightning, high-powered electrical devices (elevators, air conditioners, refrigerators, etc), faulty wiring or even problems with your utility company’s equipment. Inevitably, these are all occurrences that we cannot prevent ourselves, so how can you protect your home and equipment from these damaging power surges?

Surge Protector

A simple solution is plugging in your electronics into a surge protector. A surge protector is a device used to protect your electronics from damaging power surges. However, many people use this tool for a much more obvious function, to plug in multiple components into one outlet, not knowing its protective capabilities. You most likely use at least one surge protector in your home already. But how does it work? How do you know that you are providing the top quality protection for your important devices?

How it Works

As you know, your surge protector pulls electrical currents from one outlet and passes them through all the electrical devices plugged into the surge protector. This aside, the more important feature of this device is its metal oxide varistor (MOV) component, which diverts extra voltage and preventing it from damaging your electronics. This MOV acts in different ways depending on the voltage flow to provide your devices consistent access to adequate levels of power. If the MOV indicates high levels of voltage, it will reduce the resistance and if the voltages are low it will create a higher resistance. However, it is important to be aware that these MOV’s can also burn out. By investing in a power surge with an indicator light you will always be able to determine whether or not it’s functioning appropriately.

In our next blog, Power Surge Protection: What to Look For, we will be discussing how and where to use your surge protector and purchasing tips for finding a quality protector. For more information on power surges and how to protect your equipment, contact the experts at Expert Electric. 604-681-8338