LED fixtures, such as

With energy consumption that is less than half of what 150-watt LED parking lot light that is a direct replacement for 400-watt metal-halide (MH) fixtures. That’s 250 watts less for the same amount of light!

The average price of electricity per kilowatt-hour (kWh) is 12 cents. To figure out the monthly cost of running 25 LED parking lot lights for 11 hours per day, use this formula: (combined wattage x monthly hours of use)/1,000 x price per kWh. For 25 LED lights, (3,750 x 330)/1,000 x .12) the total would be $148.50 per month or $1,782 per year.

When the same formula is used for 400-watt MH fixtures, the monthly cost is $396, and yearly cost would be $4,752. So, in this situation, switching to LED fixtures would save approximately $3,000 per year. When coupled with the savings on maintenance, LED fixtures can save $6,470 per year. At that rate, the cost of 25 $340 LED fixtures would be recouped within two years.

Left: LED wall packs; Right: HID wall packs

Unlike LED fixtures that light up instantly, HID parking lot lights require a warmup period of up to 10 minutes before they reach full brightness. They also can’t be turned immediately back on after being switched off; this is called restrike time, and it can take up to 15 minutes before they can be turned on again. Attempting to power on the lights before the bulbs have cooled can damage a fixture’s components and cause the HID bulb to fail sooner.

HID lamps consist of a ballast and a quartz tube that contains gas, metal salts, and two tungsten electrodes. In order to create light, an electric arc passes from one electrode to the other through a gas (most commonly mercury, metal halide, or sodium). The mercury used in this process is dangerous if enough is inhaled or released into the environment. If an HID bulb bursts, all contents should be put into a sealed container or sealed bag and taken to a recycling center or hazardous waste facility. If HID fixtures are used indoors, wall packs and canopy lights, are used indoors, the possibility of ultraviolet (UV) radiation exposure should be taken into consideration. HID bulbs emit a substantial amount of UV radiation, but an outer glass envelope prevents the radiation from escaping. However—according to the FDA—”If the outer bulb breaks and the inner tube continues to operate unshielded, intense UV radiation is emitted. UV exposure at this level can cause eye and skin burns, as well as blurred or double vision, headaches, and nausea.” The UV light from an HID bulb with a broken envelope can also lead to discoloration of items and fabric. LEDs emit little to no UV radiation.

In short, LED lights are a better alternative to HID parking lot lights. They offer a great deal in the way of savings, longevity, maintenance reduction, brightness, color, and safety. While it may take a short amount of time to recoup the price of switching to LEDs, all of their qualities make it easy to see why so many businesses have started the process.

For technical questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

Location, location, location. Many factors in your quality of life are affected by where you choose to live, including your energy costs. Wallet Hub recently released a report that surveyed the average energy costs, including electricity, in all 50 states. Read on to learn more about where your state falls in the rankings.

What Affects Electricity Rates?

A number of factors play into the price of electricity in a given state or region – the proximity of energy production and fuel sources, federal or state incentives, taxes, and the local competition in the energy market can all affect the final price.

The gap between the cheapest and most expensive states can be surprisingly large – electricity in Hawaii, the most expensive state, costs four times as much per unit as it does in Washington D.C., an electrician's paradise with the lowest price for power. Joining Washington D.C. among the cheapest electricity states are North Dakota, Idaho, Louisiana and West Virginia, while Vermont, Connecticut, Alaska and New York round out the most expensive five after Hawaii.

Adding Consumption to the Mix

Of course, there's more to your utility costs than just the base sticker price. How much electricity you consume plays a role as well. Those homeowners paying sky-high prices in Hawaii, for example, also use the least electricity per household in the entire United States. Residents in Louisiana, on the other hand, use the most electricity per household, thanks to sweltering hot weather that goes hand-in-hand with significant reliance on electric air conditioning.

Given the combination of price and consumption, people living in Washington, D.C. spend the least amount on electricity, forking over an average of $79 per month, followed by residents of Illinois, New Mexico, Utah and Colorado. Despite their low consumption levels, people in Hawaii still get the highest bills, at an average of $179 per month. Residents of Alabama, Mississippi, South Carolina and Florida join them in the top five for overall electricity spending.

Let the Electricians Guide You to Lower Bills

The report also includes interviews with energy experts on how to save money on utility bills, as well as the impact of tax deductions, credits and energy assistance for low-income households in the utility market.

“Consider calling your utility company and asking if they offer any services to help you identify ways to be more efficient in your home,” Sanya Carley, associate professor in the School of Public and Environmental Affairs at Indiana University, suggests. “Many utilities offer such services for free, and will send someone to your house to prepare a formal or informal audit for you.”

To see the full list and find out where your state ranks when it comes to electricity and other household energy costs, check out the WalletHub report here. If you need tips on how to conserve electricity to reduce your utility bills no matter what the sticker price of energy is in your state, contact an expert electrician today.

Homeowners insurance is an often-overlooked but significant cost in owning a home. Your insurance policy protects you against major losses in the event of a disaster, but you need to invest in premiums each month, which can be tricky for any family on a budget. However, you do have a measure of control. Your home electrical work in particular plays a big role in calculating your insurance payments, because outdated or faulty wiring can increase the risk of a fire. Read on to learn about what types of wiring can drive up insurance rates and how you can mitigate the costs.

The Insurance Company Makes the Call

If you don't know what kind of wiring you have in your house, you should have an electrician evaluate your system as soon as possible. Since the risk of bad wiring is so catastrophic, it might be hard to even insure a house that is too far out of date. “Some insurers will not insure you at all, some will require an inspection, and some will classify you as high-risk,” CEO of insurance-services company InsurEye Alexey Saltykov told the Financial Post.

Any of these features could raise your premiums:

Upgrade Your Wiring and Save

If you are facing high insurance premiums because of outdated wiring, it means that your house is also at a greater risk of fire. It's well worth your while to ask an electrician about what it would cost to replace your wiring system with a whole new setup to protect your home and family. Cheaper insurance is just the icing on the cake.

Give the electricians at your local Mister Sparky® for any electrical repairs or upgrades. We're always here to help!