The living room seems a little dim, you think. Here’s the DIY solution you cook up: you head over to the hardware store, buy a brighter bulb, screw it into the nearest lamp and bask in the incandescent glow. Easy, right?Not exactly. Using a lightbulb with higher-than-recommended wattage for a specific fixture is known as overlamping. This seemingly innocent practice is actually surprisingly dangerous, and is one of the leading causes of house fires in the United States — right up there with candles, smoking and cooking mishaps.

Overlamping is one of the most commonly overlooked mistakes a homeowner can make, and it can be deadly. A 2011 electrical fire that killed 11 people in Brisbane — the according to home improvement blogger Taryn Williford. When you place an incandescent bulb with wattage that’s too high in the socket of a lamp that cannot provide the required electrical output, the ensuing heat and intensity of the bulb can scorch or melt the socket and the insulation of the lamp's wiring.  

Now you have prime conditions for arc fault. An arc fault occurs when a spark jumps through the air between exposed wires. This sounds dangerous, yes? It is — in fact, the National Fire Protection Agency and the National Association of State Fire Marshals electrical power. A CFL often has a tubular shape atop the familiar screw-bottom.

An LED (light-emitting diode) light is directional, rather than radiant. This allows the LED to use much less energy than an incandescent light or even a CFL. LEDs can also directly replace incandescent bulbs in some cases.

CFLs use a much lower wattage than incandescent bulbs and create far less heat, making overlamping situations far less likely. LEDs also use much less electricity and even remain cool to the touch. The risks of overlamping are negligible.

There are drawbacks to any lighting solution. Incandescent (even halogen) lights are energy inefficient. CFLs are made from materials that are terrible for the environment. LEDs burn out at a quicker rate. The right light for you is the light that makes you most comfortable in your home — and that’s a decision you need to make.

If you live in Maryland, Northern Virginia or Washington, D.C. and need schedule electrical repair service online now.

The electrical infrastructure that is the backbone to power our electrical devices is a manmade marvel. The ability to provide power to cities and towns all over the country is a benefit that we can all enjoy. Power lines are a basic component to provide electrical current throughout cities, neighbourhoods and ultimately our homes. These high-powered lines are packed with strong current and can be highly dangerous if not respected. It is critical that we exercise caution when working around electrical power lines. We have assembled some tips to bear in mind.

Depending on the location of power lines around your home and property, you may encounter situations where you must work nearby electrical lines. Often trimming hedges or trees will bring us within a short distance of live wires or poles.

Standing on ladders, can put you into harms way. Power lines carry a high capacity of electrical current that flows through the wires themselves. By placing yourself closer to high power lines, you may be at risk of causing an electrical arc. If your hedge clippers or ladder comes too close to power lines, the electrical current may jump to the metal ladder, or electrical device. These objects act as a conductor for the electricity to travel to the ground. The result of this could easily be an electrical shock or burn to your body. When performing jobs near power lines, always look up and be conscious of your proximity to the lines. You should always remain at least three meters or 10 feet away from power lines.

If you are trimming a tree, take extreme caution that your falling debris does not come into contact with the power line. A falling branch could cause a spark or stress on the lines that may result in an electrical fire.

During periods of heavy wind, trees may bend and break under the stress of the wind. Should a tree or large branch break and fall, it may pull down and disconnect a power line from an adjacent pole. Should a power pole fail due to a car accident at the base of the pole, this may also cause power lines to break and fall. During any of these events, take extreme caution and remain at least 33 feet or 10 meters away from a downed power line (The equivalent of one school bus in length). The line is likely still active and charged. If you come across a downed power line ensure that nobody moves near the power line and call 911 immediately. Quick actions can prevent serious loss of life.

As much as we love electrical use in our daily lives, it can be very dangerous. If you have questions or concerns with power lines in your neighbourhood you can contact BC Hydro. For assistance with your home electrical, surge protection or service panel upgrades use a licence electrician. Contact your local Expert Electric at 604-681-8338.

If you’ve ever watched the show “Holmes on Homes” on HGTV, you’ve likely seen the problems associated with old or faulty wiring.  Mike Holmes tends to get very agitated by safety issues, and for good reason.  Each year, over 40,000 homes suffer fire damage due to home electrical problems.  These electrical fires account for hundreds of deaths and thousands of injuries.  And what’s the main culprit?  Old wiring!

If you live in a classic home built before 1940, chances are you have old wiring in the house.  You may have knob-and-tube or Romex wiring, both of which can become brittle over time.  The insulation dries out and starts to crumble, causing the inner wire to become exposed. The cloth insulation around the wire deteriorates with age and eventually becomes unsafe.

But perhaps one of the biggest threats of Romex and knob-and-tube wiring is that these types of wires aren’t grounded.  That means if one of your appliances shorts out, you could become the path to the ground for the electricity.

Even if your home is only 20 or 30 years old, you could still experience electrical problems at home due to a lack of capacity.  Most homes built more than 10 years ago are not designed to handle the amount of electronics we use today.  Think about it:  if your house was built in 1980, it was built before home PCs and laptops and HDTVs and surround sound and all of the other toys and gadgets we use today.  These appliances can draw a lot of power, and your current electrical wiring may not be up to the task.

If you own one of the one million houses in the DFW area that’s more than 20 years old, it’s a good idea to have a licensed electrician come out and take a look at the wiring.  He or she can make sure that your house will be safe and productive for many years.