If you are looking for a Garland electrician, be sure to find one who cares enough about safety to help determine if your home is up to par. Some older homes often lack basic precautionary features that are inexpensive, yet vital to the safety of the family. One of these features is the GFCI, and any Garland electrician should be able to determine if your home has one.

Recently in Texas, a family experienced a heartbreaking illustration of what can happen without a GFCI. The mother was bathing her two children, ages five and six, when a hairdryer that was plugged into a nearby outlet fell into the tub. Both children were killed by the electrical current passing into the bathwater.

One of the most horrifying things about this story is that this accident was preventable! Installing a Ground Fault Circuit Interrupter, or GFCI, could have saved these children’s lives, at a cost of less than $60. The circuit in their bathroom was not equipped with this simple piece of equipment, simply because their home was an older home.

When the electrical current is imbalanced, it indicates that the current is passing through something that it is not intended to pass through. A GFCI handles that situation by quickly interrupting the flow of current before it can do harm. Water is an especially dangerous conductor of current, so a GFCI should be installed everywhere that an electrical device might be plugged in near water. This means that GFCIs should be on outlets in not only kitchens and bathrooms, but also in garages, outside, near countertops, and near hot tubs and pools. While a layperson might not realize that, an electrician should. That is why, whether you are looking for a Dallas, Garland, or Rowlett electrician, you should make sure to find one with enough experience to spot potential hazards before they cause tragic results.

One of the best Garland electrical teams you will find is the crew at ElectricMan, Inc. Available twenty-four hours a day, seven days a week, ElectricMan’s team is made up of trained electricians who care about the safety of families. To learn more about finding an electrician Garland homeowners can trust, visit the website. For a deeper connection, join the online community on ElectricMan’s social sites, or call (972)792-7270.

As the rest of the world is observing Discovery Channel®’s legendary Shark Week 2014, we at Mr. Electric® took it upon ourselves to set aside this time to celebrate what we have endearingly termed Spark Week. While the fascinating facts and featured film clips of the mystifying creatures are fun and interesting to watch, we believe the electric spark is just as deserving of our appreciation for a week as sharks are – especially taking into consideration that electricity wouldn’t exist without it.

As far back as 600 BC, a Greek philosopher by the name of Thales of Miletus discovered that when amber is rubbed with a cloth, it can be electrified and attract other objects and produce sparks. German mathematician and philosopher Gottfried Leibniz made the association of sparks with electrical phenomena in 1671. There were some more experiments performed in 1708 by Samuel Wall with amber rubbed with cloth to produce sparks. And finally, the story we are all familiar with, in 1972 Thomas-Francois Dalibard and Benjamin Franklin each independently demonstrated that lighting and electricity were the same thing. Ben even extracted sparks from a cloud during a thunderstorm with his famous kite experiment.

The discovery of the electric spark encouraged electrical research. Once scientists began to understand how electric sparks occurred in nature, the question became how that power could be harnessed and controlled. This was the beginning of electricity.

Spark plugs begin the combustion in your car’s engine, allowing you to start your car every morning. The discovery of the electric spark led to the development of spark-gap transmitters. While these transmitters are no longer used in radio communication today, they played a large part in the beginning of wireless communication. Without sparks, you would have a much harder time driving, listening to music, and even seeing in the dark. The discovery of sparks is one of the most important scientific advances in history, so don’t forget to celebrate Spark Week!

Decorative LED path lights are the perfect gift for dads who want to add an upscale look to their yard. Shade styles include mushroom, frosted glass, offset cone, or hammered cone, and offset linear light heads are also available to direct illumination exactly where it’s needed. These LED path lights can be used for numerous applications, such as garden lights, patio lights, driveway lights, walkway lights, or sidewalk lights. The long-lasting fixtures emit up to 155 lumens of warm white illumination. They’re constructed of powder coated bronze or black aluminum and are weatherproof as well as rust resistant. Each path light comes with a screw-on ground stake.

This easy-to-install, low-profile light mounts directly to a junction box or in a can light housing. It’s perfect for low ceilings, basement, garage, hallway, closet, bathroom, workshop, and shed lighting. The long-lasting LED ceiling light consumes eight times less power than incandescent bulbs with equivalent output. It emits up to 1,100 lumens of natural white or warm white illumination and has a high color-rendering index (CRI) to show the true colors of objects and surroundings. A removable E26/E27 Edison screw base is included along with hardware for mounting to a junction box or in a can light housing.

Help him enhance the look of his boat while increasing nighttime visibility! LED underwater boat lights can be used as transom lights for colorful wakes, attracting fish, or for nighttime swimming and diving. Single-, double-, and triple-lens versions are available, and the underwater lights produce powerful red, green, blue, white, or RGB color-changing illumination. RGB underwater lights are capable of nine dynamic color-changing and single-color modes with an RGB controller and RF remote (sold separately). The LED lights are designed to last 42 times longer than underwater lights with incandescent bulbs.

There was a time when buying light bulbs used to be a much easier task than it is today. Then along came LED, CFL, and light bulbs bent on reducing energy. With this, the good old incandescent started losing their place on our bulb holders. Gone are the days when finding a bulb for your home just meant looking at the wattage on the box. If a bulb was rated 100 watts, you knew it would be 25% brighter than a 75-watt one.

An entirely new rating system is now used and this has been giving shoppers grief for quite a while. At the center of this confusion is the word ‘lumens,’ which appears along its older and more familiar cousin ‘watts.’ Learning about lumens is the price you pay to help keep our planet safe. Don’t worry, though. We will tell you everything you need to know about the new lights rating system.

Lumens are units used to measure how much light a bulb puts out. Watts measure how much electrical power the bulb uses. With incandescent bulbs, the expected brightness pretty much depended on the wattage of the bulb. One lumen is equal to the amount of light given out by a birthday candle.

The idea with energy saver bulbs is to use fewer watts and produce more power. Incandescent bulbs produced by different companies are pretty uniform. On the other hand, energy saver bulbs are so varied, you don’t know if two 50 watt bulbs will be equally bright. This is why CFL and LED bulbs have lumen figures printed on them while incandescent varieties only have wattage.

When you hear “lumen per watt”, think miles per gallon. This is a measure of efficiency. It measures how many lumens of electricity a bulb can produce when using up one watt of electricity. This is the factor that should interest you the most when you are buying light bulbs. The first step is to figure out the brightness you want in lumens. If you want a brighter room, go for a bulb with more lumens. To dim it down, consider a bulb with a smaller lumen rating. Also, find the lumens per watt rating to determine which bulb has the greatest efficiency. Usually, the lumens per watt rating is an average, as bulbs reduce in efficiency with time. The lumen per watt rating is calculated by dividing the brightness in lumens a bulb offers by the number of watts it takes to produce.

Watts can be converted into lumens by multiplying the lumens per watt rating by the brightness.

The Federal Trade Commission now requires a product information summary, called the Lighting Facts label, to be attached to every lighting product. Another label that you should be on the lookout for is the Energy Star mark. The system was created by the Environmental Protection Authority in 1992 to govern the energy consumption of various household and industrial appliances. When it comes to lighting, this mark is put on bulbs that have met a certain lumen per watts threshold. This mark effectively spells impending doom for incandescent bulbs because they do not come anywhere near fulfilling these new efficiency ratings. If you are not into reading the fine prints and making calculations, the Energy Star logo will make your life easier. Look for the label on light bulbs to ensure you are getting a good deal.

The chart below can help to understand the Energy Star system.

This chart is an excellent indicator of how incandescents measure up to energy savers.

Aside from the fact that you have one more bullet in your trivia arsenal, your hunt for light bulbs should now return to the simple task it should be.

Question:  How many psychiatrists does it take to change a light bulb?

Answer:  Only one…but the light bulb has to really WANT to change.

Maybe you’ve heard this joke before.  And, maybe you are tired of hearing light bulb jokes in general.  But, like it or not—Change is inevitable and the LED light bulb is leading the way.

Nearly a day goes by that we do not hear about light emitting diodes (LEDs) and the changes taking place in the lighting industry.

And, for good reason.  LED is changing the way we see the light.  The latest ceiling pendants, mini chandeliers, task lamps and outdoor light fixtures are accepting these new bulbs with tremendous gusto.  The lighting effects are becoming more versatile and redefining our vision of elegance.  The price of LED lamps is even coming down.

As LED light fixtures become more affordable and user-friendly, the choice of which bulb to use in your next lighting design will be clear…or frosted or soft white or blue…but it will be LED!

1.  LEDs lasts up to 50 times longer and use 80% less energy than old standard incandescent light bulbs.

2.  LEDs burn out slowly over time, so the dreaded pop and bulb blow out will be a blast from the past–something to tell your grandchildren about!

3.  LEDs radiate little to no heat and they hold up extremely well in harsh winter weather conditions.

4.  LEDs are eco-friendly; they do not contain toxic gas or emit harmful IR/UV radiation.

5.  LEDs are also referred to as “solid-state” lighting  (SSL) because they use semiconductors and are solid light sources; they are shatter-resistant and durable.

Embrace change. Learn the facts and put LED to work in your home or office environment.

√ Buy from a reputable dealer.  All LED bulbs are not created equal.  Through a process of “binning,” LED chips are sorted according to the quality and degree of luminescence.  Cheaper LED bulbs may be equipped with a lower quality chip that will not provide the brightest light and may burn out prematurely.

√ Look for Energy Star®-ratings to find LEDs of the highest quality.

Some of the latest LED innovations include designer mini pendants and ceiling fixtures from ELK Lighting.