Smart technology is poised to take over the home appliance market. We already have smart thermostats, smart lighting and even smart refrigerators. If that's not enough for you, there are some new contenders on the market that allow you to turn any electrical device in the home into a smart item. The best part is that it's a simple DIY experience – no need to find an electrician to hook it up. It’s the smart plug, a small box that you plug into your home's outlets. From there, you can use your smart phone to control whatever light, television or other electronic appliance routed through the smart plug. Read on to learn more about these remarkable efficiency devices.

Control and Monitor Your Electronics

There are a variety of smart plug options on the market: The Satechi IQ Plug, the Belkin WeMo Insight Switch, the D-Link Wi-Fi Smart Plug and the Valta Starter Kit, among others. The cost and functionality of the different brands vary, but they all operate on a similar principle – allowing you to set schedules and remotely control whatever device you choose.

The smart plugs connect to your phone via Bluetooth or wireless Internet, so you can switch them on or off from anywhere in the home – or even from the other side of the country if you have an internet-optimized model. You can also program schedules so the plug automatically activates an appliance at appointed times – turning a coffee maker on first thing in the morning, for example, or switching on a space heater before you go to bed in a chilly part of the house.

Retro Meets Modern

The upshot is that there's no need to wait for cutting-edge smart devices to come out to keep your home on the cutting edge of technology. Imagine impressing your neighbor by demonstrating the new smart functionality of a retro 1950s television, or your old Victrola vinyl player.

Smart plugs also monitor how much electricity a given device uses and when, so you can make informed choices about increasing your energy efficiency though disaggregation, breaking it down appliance by appliance. You can also save energy by using the smart plug to turn off the power to devices when you aren't actively using them, preventing your electricity bills from skyrocketing due to always-on settings or “energy vampires.”

Savings and Control All at Once

If you have additional questions about smart plugs and how they work, find an electrician who can show you their utility and functionality. With surprisingly little effort, you can harness their power to save energy and control devices all throughout your home.

When you are using an electronic device and need to charge it, you look for the closest power point to plug it in. There are times when you just can”t find a plug point within easy reach; that’s when you look for an electrical extension cord and plug in the device you need to charge.

This is something most of us do as a matter of routine and we don’t give much thought to it. Extension cords are undoubtedly a very handy tool that solves some very basic charging problems. When there is a shortage of outlets or if an electronic device is just a little too far from the closest electrical point, these extension cords prove very useful.

However, it’s important to keep in view the fact that an extension cord isn’t meant to be a permanent electrical fixture; it’s to be used for a specific reason and it can be hazardous to use them incorrectly.

Here, we talk about the different hazards of electrical extension cords and how they can be avoided:

Smoke alarms are your first line of defense in the event of a fire.  Smoke alarms come in two main different types.  Ionization and photoelectric.

Ionization smoke alarms have a ionization chamber inside the smoke alarm unit itself.  The smoke alarm chamber consist of two plates about a centimeter apart.  One of the plates is charged positive by the battery or transformer in AC models and the other plates is negative.  Alpha particles constantly released by the americium knock electrons off of the atoms in the air, ionizing the oxygen and nitrogen atoms in the chamber. The positively-charged oxygen and nitrogen atoms are attracted to the negative plate and the electrons are attracted to the positive plate, generating a minuet, constant electrical current. Upon smoke entering the chamber, the smoke particles attach to the ions and neutralize them, so they do not reach the plate. The drop in current between the plates triggers the alarm.

Photoelectric smoke alarms have an internal chamber with a light beam.  When smoke enters the chamber it blocks the light from entering the photoelectric sensor causing an alarm to sound.  Smoke may also cause the light beam to scatter creating an inconsistent pattern on the photocell causing the smoke alarm to sound.  Photoelectric chambers can detect a smoldering fire faster than most ionization type smoke alarms.

Smoke alarms are most commonly seen as battery operated units in older homes.  Battery units are also common in situations were a smoke alarm is added and AC power is not accessible.  AC units power the smoke alarm with standard AC current from the homes wiring.  AC units are common in newer homes.  Current new construction code requires smoke alarms to be AC with a battery built into the unit as a back up power source.

Current smoke alarms used in new construction homes are AC and battery combination units as stated above.  They also require a dual sensing smoke alarm unit.  The most common dual sensing combination is either photoelectric and ionization or a combination ionization and carbon monoxide unit.

Carbon monoxide also called the invisible killer, is odorless and colorless gas.  Carbon monoxide is most commonly created in the home when unburnt or improperly vented heating equipment releases the gas.  Carbon monoxide can be created from natural gas heaters, wood burners, and oil burners.  Carbon monoxide can also enter the home from the exhaust of a running vehicle or generator.

Carbon monoxide effect some people easier than others.  People such as elderly, pregnant women, infants, and people with emphysema, asthma, or heart disease can suffer the effects of carbon monoxide much quicker than a healthy person.

We can install most major brands of smoke alarms.  We offer smoke alarm installation for Kiddie and First Alert.  In addition to Kiddie and First alert, we also offer smoke alarm installation for USI, and BRK smoke alarms.  We offer smoke alarm installation for AC units with batter backup, AC only units, and battery only units.  We highly recommended the AC with battery backup units for superior performance.  We also offer smoke alarm installation for interconnected units.  This type is highly recommended.  They function as following:  When one smoke alarm unit goes into alarm mode it causes the other smoke alarms to sound an alarm.  If access limits being able to connect the smoke alarm units we offer a wireless type smoke alarm installation to insure the units are properly interconnected.

The phrase “light recipe” is a good entry point into a conversation about LED lighting as a world-changing technology. While people originally thought of LEDs as a somewhat ineffectual light source good only for small electronic displays and then as a profound energy saver, we now understand that the potential for LEDs to change the world we live in is even more staggering than the way cell phones were first imagined to merely facilitate conversation and grew to be pocket PCs used for managing our social, economic, and artistic lives.

Have you been eyeing that gorgeous chandelier at your favorite lighting store for a while now? If you have been dreaming of transforming a boring entrance way or a drab dining room into something that you can be proud of, the time is now to buy that chandelier. Lighting can make such a huge difference in a room. It transforms it from drab and boring to spectacular and gorgeous. You will need an electrician to take of your Beverly Hills electrical needs like those at The Electric Connection.

While you can certainly buy the chandelier of your dreams without any help, you will definitely need an experienced electrician to complete the installation process. You don’t want your dream of a gorgeous chandelier to go up in smoke, literally, by not having the fixture installed correctly. An electrician in Beverly Hills will need to determine what will need to be done to get the new light fixture installed where you want it.

In many cases, an existing fixture will already be in place and the electrician will be able to use the existing wiring. However, if you would like the chandelier hung in a place that does not have an existing light or ceiling fan fixture, there will be a little extra work involved. The electrician will need to create a a wiring harness, which is simple enough but should only be handled by somebody who knows how to safely work with electricity.

Along with hanging the chandelier, you will likely want to have a dimmer switch installed to allow you to control the strength of the light emitted from the bulbs. This is another fairly simple task for your electrician. If you are ready to transform your home with a new chandelier or some other exciting lighting fixture, give The Electric Connection a call today.