Anytime you notice something strange happening with your heating system, you should probably call a professional to look at it. Better to be overly cautious than to have your heater suddenly break down on you. However, there are some conditions which need to be dealt with without delay. As soon as you notice these emergency conditions, you need to call a professional immediately. Let’s take a look at some of the times that you should call for emergency call FB Electrical Services. We provide emergency heating repair throughout the Boston area.

The commercial electricity for HVAC systems accounts for about 50 percent of a building’s total energy consumption. Being one of the major energy costs in a manufacturing facility, it dominates the building’s peak electricity demand. As such, improving the system’s efficiency, in order to cut energy costs, should be every facility manager’s priority.

The energy consumption depends on the climate, comfort preferences, building design, insulation, the timing of use, the size of the HVAC system, heat generated by electrical equipment, and other site-specific factors.

Building owners and businesses can reduce their energy costs by combining several measures that increase an HVAC system’s efficiency while reducing the demand for heating and cooling.

When selecting HVAC systems, pay attention to its design and controls. Components such as motors can impact heavily on the running costs of equipment because some are usually oversized to meet peak demands. An ideal system should have more variable speed control, inverter controls, economizers, demand controlled ventilation, advanced sensors and monitoring, as well as superior diagnostics. In addition, the system should be the appropriate size; not too small or oversized.

By controlling and running the HVAC motors at speeds based on the heating or cooling needs, consumers are able to realize energy savings of between 30 and 50 percent compared to the conventional constant speed operations. Most manufacturers prefer newer algorithm-driven smart microprocessors.

These provide a refined speed control that responds to the changing load in the building. Instead of using on and off cycling, these controls adjust the system according to the actual cooling or heating needs of the facility. More functions can be added through software add-ons as opposed to costly hardware upgrades.

Some of the ways to optimize HVAC systems include the use of thermostats and control systems, locating the HVAC unit in the best place possible, and modifying the ventilation and distribution. These are discussed more fully below:

A HVAC energy audit helps in identifying the operational deficiencies, hence allowing the building manager to take the necessary measures to enhance performance. The audit is often necessary because it helps in determining the amount of energy use, maintenance and upgrade requirements.

Consumers can then reduce their energy costs by optimizing, replacing or retrofitting the HVAC system to become more energy efficient. This not only increases efficiency and reduces the amount of commercial electricity for the HVAC system, but also improves the air quality.

Jewelry doesn’t sparkle and shine on its own – the reason a gem looks radiant is because of the way it reflects light! That being said, lighting is integral to retail design in a jewelry store. You want your displays to entice customers and show off your products in all their brilliance! Hopefully, we can help. This post will lay out options for various jewelry lighting displays.

puck lights to call attention to individual pieces, as seen in the photo to the right. Puck lighting above jewelry creates beautiful silhouettes and puts a spotlight on each piece.

If you love the look of evenly illuminated in-wall shelving displays, there is a way to avoid the spotlight effect. For a more subtle glow, install light fixtures on the inside edges of your shelves. See Xenon Low Voltage Light Strip or any of our

You’re showing off your most valuable items in the counter-style showcase, so it’s important to get the lighting right. However, make sure the actual light fixtures do not become focal points.

With a glass showcase, you need to integrate the lighting so that your display will shine, and so that it’s not blocked in any way by wires or lamp heads. The best way to do this is to install thin lighting strips inside the showcase, just below where the edge of the counter is. You can see an example in the photo to the right.

Our Your window display can be the number one determinant of store traffic. Like the counter showcase, it’s ideal if the light fixtures aren’t visible at all here so that your most alluring items take center stage.

You will likely have wall space to work with on all four sides of the window display, so it wouldn’t be too difficult to align microfluorescent fixtures against the edges for even illumination.

Depending on what types of items you are featuring, you might want to incorporate some spot lighting as well. You could use an adjustable adjustable recessed lights in the ceiling above the window display.

As you continue cleaning your home for spring, now may be the time to address minor electrical problems that have been plaguing your household all winter. Issues such as dead outlets, flickering lights and a bevy of other concerns might have been bugging you all season , but between the cold temperatures and other hassles of the season, you may have avoided addressing these problems. Now that the weather is finally starting to get a little more tolerable, you can turn your attentions back to your home's upkeep.