When you’re purchasing LED strip lights, there are numerous details and specifications upon which to base your decision. Color, length, and intensity are some of the major deciding factors, but there are many unthought-of product aspects that further customize light strips and what they’ll require when it’s time to install them. For example, a decision between 24-volt strip lights could change the products needed for your project.

While it depends on a light strip’s current draw, LED type, and number of LEDs, 24-volt LED strip lights tend to have longer maximum runs than 12-volt strips. This is because higher voltage carries more power. All strips have a maximum run, which is the length of continuous strip that can be powered without experiencing voltage drop. Voltage drop happens when the supplied energy of a power source is reduced as electric current flows through wire (or any other pieces of equipment that do not supply voltage on a circuit). If a run of strip is too long, reduced energy across the strip will lessen its intensity near the end.

Because they can handle more power, many 24-volt LED strip lights tend to have brighter LEDs, dual-row LED configurations, or single-row configurations of more LEDs. In these instances, maximum run might be the same as a 12-volt strip. However, keep in mind that these are more powerful strips with more LEDs or higher LED intensities. An identical 12-volt LED strip light would have a shorter maximum run.

Make sure to check any light strip’s specifications or description for its maximum run.

If you have questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

Fixing things around the house is one of the joys of home ownership. It makes you feel accomplished and you can save a ton of money. It is a lot of work sometimes, but the excitement of tackling something that makes you feel a little more a part of your home is thrilling. Unfortunately, not every home improvement project or little fixes here and there are things you should attempt to take on if you don’t have the knowledge and training. Electrical work is one of those things. A Santa Monica electrician, like those at The Electric Connection, wants to warn you of some of the dangers you face when you take on a job that is above your skill level.

1-Property damage is a very real possibility when you attempt to fix something you are not really trained to repair. Messing around with electrical wiring can result in frying certain appliances or even melting the wires behind the walls. You would need to replace expensive appliances and possibly have to rewire that section of your home.

2-Fire is probably one of the most common problems associated with somebody unfamiliar with electrical work doing repairs they shouldn’t be. Melting wires or wires that are not connected properly can cause a spark that will set off a devastating fire. It is always best to hire a professional electrician. Santa Monica residents can feel safer knowing the wiring was taken care of by somebody who has been trained in the field.

3-Injury to the person doing the work is another very real possibility. Electrical shock can be deadly.

4-Nullifying home owner’s insurance policy may happen if an unlicensed person complete the work and a fire or other property damage occurs.

Don’t take the chance. Call The Electric Connection today and hire a licensed electrician to take care of your home’s electrical needs.

Everyone wants to save money.  With the economy, still slow and unemployment high, family and business budgets are tight.  Thus, we’re all looking for ways to lower our bills, and there aren’t many bills more devastating to budgets than the electric bill.  Not to mention those bills during a brutal Texas summer.

At the same time, people are finally beginning to understand that the damage we do to our environment is harmful in the long run, and are trying to find a way to reduce our impact on the planet.  A lot of the time it seems like we must choose between saving money and helping the earth.  That is simply not the case when we’re talking about options for lighting your home or business.  The employees of my Plano electrical service tell you that you can actually do both at the same time, and that it‘s as simple as changing a light bulb!

Light bulb shopping has changed a lot in the last ten years.  Our choices are no longer limited to the incandescent (and sometimes halogen) bulbs we all grew up with.  Today fluorescent CFL lights are available in almost every store, and LED lights are starting to become more widely available as well. These bulbs use far less energy to create the same amount of light, which ultimately means less energy you have to pay for.  The savings can be seen with a single bulb.

For example, if you replace just one 60-watt incandescent bulb you use four hours each day with a 12-watt LED equivalent, you’ll wind up saving almost $10 a year on average! These bulbs can save you money and hassle in ways you might not think of at first.  For instance, LED and CFL bulbs produce very little heat when compared to an incandescent bulb which means that they don’t attract insects, and that your air conditioner doesn’t have another heat source in your house to cool down.

There are electrical benefits to having cooler bulbs too: less heat being generated by light bulbs means that there’s less heat stress being placed on the sockets and fixtures they’re attached to.  Less stress on the fixtures means that they have a much longer life, and that you’re saving money you’d otherwise have to spend on repairing or replacing them.

All these choices beg the question of which type of bulb is better.  From an electrician’s view, they’re both superior to the old kind of bulbs.  Personally, I think LED lights are superior to fluorescent CFL lights right now.  The technology that makes CFL bulbs work is still primitive.  Think of what cell phones looked like in the 1980‘s compared to today; right now, the CFL bulbs you can buy are the fluorescent bulb version of those old brick phones. LED lights have very distinct advantages:

These reasons are why I generally recommend LED bulbs; they’re more earth-friendly, easy to dispose of, use less energy than even CFL bulbs, and last a very long time.  They can be more expensive than other bulbs, but you’ll save enough money on your power bills in the long run to come out well ahead!

It used to be that the moon and the stars were the brightest bulbs in the sky. But as anyone who’s flown across a city at night knows, these days, there are an awful lot of outdoor lights shining up from the ground.

Many people assume that an orange nighttime sky is just ugly, not harmful. But recently scientific studies have suggested that light pollution is more than an annoyance; it’s destroying wildlife, damaging human health and costing us a lot of extra money.

That’s why a growing number of cities and towns across the United States are drafting ordinances to try to bring the night sky back. They’re requiring that all new outdoor lighting fixtures that are installed – both commercial and residential – only shine light down onto the place that needs to be lit, not up into the atmosphere.

Known as the Dark Sky movement, these ordinances vary from town to town, but often the requirements are similar. No outdoor lighting fixtures can shine any light above a horizontal line. Instead, everything must shine down.

“We’re not saying you can’t have that aesthetic value, you just light it from the top down,” explains Johanna Duffek, Sections Coordinator with the International Dark Sky Association, a Tucson, AZ-based non-profit group that’s at the forefront of the movement.

Although the original purpose of The International Dark Sky Association was to keep the night sky pristine for astronomers, today the Dark Sky movement is gaining ground because more consumers are interested in reducing their energy usage, and when you’re not wasting light that’s going up into the sky, you can use a lower wattage bulb to achieve the same level of exterior lighting.

For example, if a homeowner used an outdoor sconce that had openings on the top and the bottom, he’d have to use a 100-watt bulb. But if he switches to a Dark Sky fixture that only allows light to shine from the bottom of the fixture, the homeowner could use a 40-watt bulb.

“It’s a more efficient use of light,” explains Tom Patterson, Director of Product Development at Hinkley Lighting, which already offers some Dark Sky light fixtures. “You can use a third of the wattage or half of the wattage and get the same amount of lumens.”

Patterson says consumer awareness of the Dark Sky movement is still very low, but he said awareness has been growing among local government leaders, and that is forcing the manufacturers to come out with more and more Dark Sky-friendly outdoor fixtures.

“Now in Arizona, in all the new construction, you’re going to have to meet the dark sky qualifications,” Patterson says. “It’s catching a little bit more momentum.” Hinkley, for example, advertises that it can make about 25 percent of its outdoor lighting fixtures Dark Sky compliant. Retailers are charged about $15 to $20 to change a regular fixture to a Dark Sky fixture.

Currently, there is no official government standard for a Dark Sky fixture, but the International Dark Sky Association has been in talks with the Department of Energy to incorporate the Dark Sky philosophy into the Energy Star program.

The International Dark Sky Association also independently evaluates fixtures from manufacturers and awards a seal of approval to all of those that meet its requirements.

So far, Duffek says the International Dark Sky Association has awarded Fixture Seals of Approval to 75 different lighting manufacturers, and while many of those have been commercial applications, Duffek says the organization is hoping to increase participation among residential lighting manufacturers.

Hubbardton Forge, for example, makes a sconce that has received the Dark Sky Fixture Seal of Approval that features a slate-colored ceramic shield around the light bulb that forces the light down. And the Minka Group has several outdoor lights with metal crowns that block the upward light.

Both Patterson and Duffek say the biggest resistance to Dark Sky fixtures isn’t coming from manufacturers but from homeowners who are afraid that less exterior lighting around their house will make them less safe.

But Duffek said homeowners need to understand that blocking light from going into the sky doesn’t mean blocking all exterior lighting. Duffek says the Dark Sky movement suggests homeowners buy outdoor lights with movement sensors that will go on if someone enters your yard, which can help alert you to danger and keep your energy usage down at the same time.

“When you keep the lighting on all the time, all you’re doing is lighting for the bad guys,” Duffek says.

Duffek says the biggest challenge now is to educate the public about the benefits of reducing light pollution and encouraging manufacturers to continue to design compliant fixtures.

“We always try to present it as a win, win, win solution,” she says.