Motion sensor LED stair lights let you safely and effectively navigate your steps while eliminating the need for any action. And because they turn off automatically, they also save power! We’ve recently installed these handy little LED stair lights and wanted to share the process with you.

wire that will be needed. It is best to order more than you need so that there’s slack in the line and enough to extend to where your power supply will be mounted.

It’s important to choose the correct wire gauge for the length of wire you need and amount of current that will be flowing through it. The key is to avoid voltage drop, which happens when the supplied energy of a power source is reduced as electric current flows through wire (or any other pieces of equipment that do not supply voltage on a circuit). The longer the run of wire, the lower the gauge of wire needed.

*If you need help determining the correct wire gauge, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

3. Using wiring from the

4. Use a run of wire to join the PIR sensor at the top of your steps with the power supply. You can wire both PIR sensors to the power supply using electrical tape or with

5. Connect your main line to the PIR sensor at the bottom of your steps, and begin connecting each step light with

7. Finally, connect to power.

LED stair lights and

4. Connect your main line to the PIR sensor at the bottom of your steps, and begin connecting each step light with

6. Finally, plug the power supply into your wall outlet.

A variety of ways exist to quickly and efficiently complete an electrical installation. One method involves using pre-made and pre-fabricated conduits, cables, panels, and devices. Pre-fab strategies cut down on repetitive labor costs and scrap material waste.

Furthermore, pre-fabricated components are assembled in quality-controlled factories by highly trained technicians. This ensures that every device and termination is in working order and properly connected. These technicians work faster and cost less per hour than a journeyman electrician, therefore saving the contractor time and money.

Another option to increase efficiency involves using pre-wired devices. They can be used for repetitive tasks like receptacles, switches, light fixtures, data ports, or fire alarms. They save time by eliminating the need to terminate each device individually. Instead, boxes are made to order and ready to install. The desired length of cable is attached and ready to run to the nearest junction point. Simply attach the box, route the cable, and connect to the supply wires. Most suppliers prepare a custom quote, further reducing time spent by the foreman planning and ordering parts individually.

Pre-wired panels are possibly the simplest way to save money, as they require no special tools. Wiring up a panel at the shop before heading to the job site allows you to function test it before installation. This ensures proper functionality. In addition, it keeps the interior of the panel away from weather and other possible sources of job-site damage. For larger or more complex panels, suppliers can be arranged and have the work performed by specialized technicians. Panels can even be ordered with pre-cut and pre-terminated lengths of cable or cord.

Most electricians have used pre-formed conduit, especially PVC which requires specialized tools to bend. However, entire runs of pipe can be custom ordered and pre-shaped. Especially useful in underground conduit networks or when complicated bends are required, these pre-made conduits drop in place and fit perfectly to the engineer’s prints. They also ensure that conduits are not damaged or kinked during the bending process and that no sharp edges or rough spots are left to damage wires or cables.

If the project demands it, entire buildings can be pre-made and pre-wired in a factory setting by trained technicians who specialize in quickly and efficiently preparing custom ordered buildings. Especially useful in industrial settings, these buildings come complete with all interior and exterior lights, switches, receptacles, and control wiring.

Often, motor control centers (MCCs) for large industrial installations are constructed this way. Therefore, on-site electricians are free to begin immediately running cables to motors and devices, with simple termination points inside a completed building. In addition to using fewer electrician hours, they also reduce required hours from other tradespeople such as welders or cladding installers.

Finally, pre-fab strategies are a great solution for reducing material waste, worker hours, and downtime while making deadlines a snap. Projects run smoother with fewer errors.

As a DC or Maryland resident, electricity and natural gas are deregulated, giving you the option to choose your energy suppliers. Virginia residents can choose their natural gas supplier, but electricity is not deregulated in the state.

Deregulation occurred back in 1999 when the Electricity Competition Act passed with the hopes of introducing competition for Pepco, the primary electricity provider in DC. Nearly 170 companies are now licensed as alternative energy suppliers in DC.

In theory, increasing competition is a great plan. It allows you to comparison shop and choose the best alternative energy supplier based on rates, customer service, and other factors.

Unfortunately, this also sets the stage for unscrupulous alternative energy suppliers to pitch low rates by phone, direct mail, and door-to-door salesmen—only to charge more than the customer was originally paying. Learning how to spot these phony propositions can help you choose a legitimate alternative energy supplier!

Hundreds of DC residents make complaints about alternative energy suppliers every year. According to a recent Washington Post article, Starion Energy is one such company that’s had its fair share of complaints in recent years. The article reports that in some cases, the switch to Starion has caused customers’ electricity bills to increase by more than 50 percent—despite having agreed to make the change for money-saving purposes.

Since alternative energy suppliers are prohibited from “engaging in…unlawful, misleading or deceptive” marketing tactics under District law, customer complaints are taken very seriously. If you have had a bad experience with an alternative energy supplier, file a complaint with the DC Office of the People’s Counsel.

Despite the bad press a handful of alternative energy suppliers have received, there are plenty of legitimate electricity suppliers in the DC area:

Even with shady suppliers ruled out, you still have dozens of legitimate options. Narrow down your selection by:

At Kolb Electric, we want our Maryland, Virginia, and Washington, DC customers to save as much energy as possible. By lowering your consumption each month, you lower your bills! Contact us today for more tips to keep your electricity bills down—or check out our blog with more great electricity saving tips.

Working from home is not only convenient but it is economical. Many people run businesses out of their homes and for those of you who are thinking about doing the same – you can too. Change a room in your home into a fully functioning office with our help.

One thing that most businesses have is a phone number. You may not want your business calls being directed to your home phone number otherwise you will have family members answering for you and after-hours business calls you may not have wanted to answer. We can help install a separate phone line in your office so you can have a dedicated, business phone number. This way your business and home communication are completely independent from each other.

When designing and setting up your home office, keep in mind which electronics are going where and how much power they will require. If you have a laser or large sized printer in your office, it may have a heavy draw on your power supply. Ensure that the circuit that your home office is on and the GFCI outlet can handle the load of your printer, computer, and any other electronics you need. You don’t want to trip the breaker and cause a power outage by printing out a document for one of your clients. Have one of our expert electricians review the wiring setup and test the outlet before you set up your electronics.

If you’re having meetings in your office, a proper lighting set up is important. Sometimes your office can be located in an area of the home that does not receive sufficient exterior light. Having a dimly lit room for meetings can disrupt the workflow and make it uncomfortable for all attendees. Assess the light levels at different intervals to see if you require improvements in your overhead lighting. Installing pot lights or track lights can create a comfortable atmosphere and makes it much easier to work.

When you setup your office at home you were likely thinking about economics and efficiency. With our help we can make sure that you are making the most out of your home office and that it is a place of efficiency that doesn’t overflow into your down time.