In case there is a flash flood or storm in your area or if there is a severe plumbing leak or pipe burst, that can result in flooding of water in different areas of your home. Water can cause a lot of damage to the installations and features on your property, and you would have to start the clean-up and repairs without delay. This is also when you start evaluating what can be salvaged and what would have to be replaced – and this includes your home’s wiring.

The wiring inside the walls can become dysfunctional and dangerous if it’s exposed to or submerged in water. If there is a severe flood, it becomes important to completely replace the wiring in your home. Not too many builders actually use wiring that’s rated for water exposure of this kind. Of course, not much can be done till the time all the flood water recedes and all the water has been cleared out from your home.

Even when all the water is pumped out from the indoor spaces, it’s best to shut down the electricity supply at the circuit box mains before continuing with anything. Call in your local electrician to test the wiring in your home. Even if it is still in a working condition, it’s never a good idea to use it.

The insulation can get degraded and that can raise the chances of an electrical fire in the future. In addition, when there are traces of moisture in the wiring, that leads to mould & mildew growth and the metal parts in the system can corrode. This is especially the case when the property has become flooded with salty water.

When it comes to rewiring jobs, you also have to factor in the cost of opening up the wall panels and fixing them. In instances of a flood, the walls are generally torn down right up to the framework. If you take this opportunity to upgrade the wiring in your home, you can save a significant amount of money.

Floodwater is never clean and that proves to be an additional hazard to the wiring and other installations in your home. Chemicals, oil, sewage and a number of other contaminants that come with the floodwater work their way into the smallest spaces, and this is why it’s best to just start afresh with the installation. In comparison, if your home’s wiring has been impacted by water from a burst pipe, you might be able to save these features; this is because it may not be fully-submerged in water.

However, it’s never a good idea to test the condition of the wiring yourself and you should call in a skilled and licensed electrician to thoroughly check and evaluate the installation and give their opinion. Regardless of whether the wiring in your home has got impacted by flood water or water from a damaged plumbing installation, it’s important to get it checked without delay. The professionals will provide suitable solutions based on the condition and location of the wiring.

We are a company that has been operating in this space for a number of years and have the skill, knowledge as well as the resources to handle this job in an expert manner. We can install and maintain all type of electrical installations on your residential or commercial premises. For more information, contact the Allround Electrical team at this number – 1300 169 263. Alternatively, you can write to us at our email address.

Thanks for reading,1300 169 263

Although LED T8s have not been around long enough to produce a thick memoir, there are some interesting things to note about why they exist.  A few years ago, there was concern that the rare earth metals used in fluorescent tube lamps might start getting significantly more expensive for the U.S. to purchase from China. Light bulb manufacturers began an arms race to develop an affordable and effective LED T8 replacement tube.

A sustained sharp increase in the price of phosphors never really happened. And so LED T8s have gained momentum in their evolution, organically evolving to better perform well in certain applications. Their price point has decreased, and their performance has gone up. And now, LED T8 linear lamps are certified by the DesignLights Consortium to be high quality, high efficiency lighting products.

However, LED T8s continue to be very controversial – even divisive – in the lighting world. Many people think they’re great; but some people think their existence is entirely unnecessary. Both sides of this argument tend to contextualize their visions of the merits and pitfalls of the LED T8 in a comparison with the merits and pitfalls of the traditional fluorescent T8 tube light.

LED T8 Linear Light Bulbs vs. Fluorescent T8 Linear Light Bulbs

First of all, the merits of fluorescent T8s cannot be overstated. Fluorescent tube lamp technology has been developed over decades and is now basically mastered. Fluorescent T8s are extremely inexpensive and have ridiculously long rated lives. In fact, in some cases, fluorescent T8s can last as long as LED T8s!

And it doesn’t stop there. The production of light with fluorescent tube lamp technology works really, really well. It is probably at its peak in terms of performance and cost. Fluorescent T8 light bulbs can last 50,000 hours. And despite their not-always-positive reputation for rendering color, fluorescent T8s can achieve high color rendering indexes (CRIs). But, it must be clearly noted, fluorescent T8s get more expensive as you seek a higher CRI.

And in terms of cost, let’s just say it straight: In many applications, the LED T8 tube light’s initial cost doesn’t make sense when compared to the relatively low cost of fluorescent T8s.  For example, at this stage of the game (June 2014), lighting large spaces like classrooms or large offices is job better performed by fluorescent T8s than LED. First, there’s the cost. Fluorescent tube lamps last long, cost little, and give off crisp light. Furthermore, fluorescent tubes give off light omnidirectionally, casting light upwards toward the ceiling as well as downward. This makes a space look more fully lighted. LEDs, in contrast, are generally more unidirectional and cast light downward only. This is something that will change, but, currently, this is just affirmation of the fact that fluorescent T8s reign supreme for some applications.

Fluorescent T8s often take a while to come on; they’re adversely affected by temperature (and somewhat sensitive about it); they can flicker often; and if the lights are turned on and off frequently, as in laundry room or bathroom applications, for example, they can fail quite prematurely, to the dismay and annoyance of everyone involved. And then there’s that toxic mercury vapor which poses danger to humans and the soil on which we live.

Oh yeah, fluorescent tube lamps require a ballast, too: A component that will also, eventually, fail.

Now, let’s give some attention to LED T8 tube lamps. It should first be noted that LED T8s have a higher initial cost than fluorescent T8s, which can be purchased for only a few dollars in some cases.

Despite their higher cost, LED tube lights have some nice advantages. First of all, LEDs love the cold, so they are great in cold weather applications, unlike fluorescent T8s, which become seemingly infirm in the cold, slow to turn on and flickerish. Basements, sheds, garages, porticos, covered pathways, bathrooms, etc, are great places to utilize the LED T8 linear lamp.

You also have to consider that if an LED T8 tube breaks, it will not release harmful mercury vapor into the air. Mercury from fluorescent tubes can get into the air but also the water supply, which is why you have to recycle them. For some people, the whole mercury thing is enough to open their minds to alternatives to the long-reigning fluorescent T8.

Plus, you can get better color rendering with LEDs than with fluorescent lights. Fluorescent lights work by transforming ultraviolet radiation into visible light. If you have a vague idea about what UV light is, you know that it’s the part of the light spectrum that’s just past the blue and violet area. Even with a rudimentary understanding of light, then, it’s easy to see how the result of transforming UV light into visible light would leave you with a bluish result. As a result, in general, fluorescent lights do not render reds well.

LEDs exude very little to no UV or infrared radiation, both of which fade the color of displayed objects including wall art, furniture, and even rugs. Fluorescent tubes – did you know this? – do indeed fade sensitive belongings over time.

Finally, LED tubes do not generally require a separate power supply. They run on line voltage and require no separate drivers, ballasts, or transformers. That’s one less thing that can break. In conclusion, LED T8s are more expensive than fluorescent T8s, but LEDs are safer, render color better, require no ballasts, operate better in the cold, and do not decline significantly in lifespan due to frequently switching on and off. This means that there are some applications, like cold places, bathrooms, basements, laundry rooms, kitchens, closets, storage rooms, walk in refrigerators or freezers, or places where there’s a risk of broken light bulbs like gyms, warehouses, etc, for which LED T8s might be the better choice. And since LED T8s don’t weaken with frequent switching on and off, they are great for use with occupancy sensors.

Today, most property owners look for ways and means to make their properties more energy-efficient. It’s why people insulate their homes using the latest materials, are choosing appliances with a high WELS rating and opt for green building materials when they are constructing their homes. One more effective way to improve the energy efficiency of your home or commercial establishment is to opt for LED lighting systems.

Many people avoid replacing their older CFL bulbs with energy-efficient LED bulbs because they feel the latter are too expensive. While it’s true that the up-front cost of LED bulbs is 5-6 times higher than standard bulbs, the cost factors can’t be looked at in isolation. Here are some other facts that will help you make a more well-informed choice about the type of lighting to use.

Unlike conventional bulbs, LEDs don’t have any filament that can burn out and they emit a very cool light which goes a long way in reducing residential and commercial air- conditioning bills. These bulbs get illuminated when the electrons move through a semi-conductor and release visible light.

Though the initial costs of LED lights are higher than other conventional types of lighting, you end up saving a significant amount of money in the long term. Regardless of whether you need commercial or residential LED lighting, transitioning to LED light bulbs is a smart choice. Today, a large number of homeowners and commercial establishments are switching to LED lighting.

Many people wonder whether LED bulbs are able to provide as much illumination as incandescent bulbs or CFL bulbs do. In order to understand this, it’s important to understand a little more about how the light intensity of a bulb is measured. Lumen (a measure of the light intensity) is the simplest (though not perfect) measure of lighting efficiency that any lighting sources produce for every watt.

A traditional incandescent bulb provides 13 lumens per watt to light a room. A fluorescent globe provides around 60 lumens per watt. In comparison, an LED bulb provides 80 lumens per watt. As you can see, even when it comes to illumination, LED bulbs stand a head above the rest of the lighting options.

Apart from the illumination and energy-efficiency factors, there are some other distinct advantages to using LEDs on your commercial or residential property.

The need of the hour is for energy-efficient alternatives and LED lighting is a revolution in lighting. No matter which way you look at it, you stand to benefit from switching to LED lighting. For any more information about LED lighting and for any type of commercial or residential electrical jobs, call Allround Electrical’s friendly team today at this number – 1300 169 263. You can also write to us at this email address or by filling out this contact form.

Thanks for reading,1300 169 263

Living in a small space may be challenging, but we like to take on challenges and make the best of what we have to bring out the beauty in our homes. From a studio apartment in Hoboken to a single-family home with a narrow eat-in kitchen in Palm Beach Gardens, we can help inspire you to make your home exactly what you want.

Maximizing storage and arranging furniture can dramatically enhance the space you have, and learning to use color effectively will also brilliantly expand the dimension of your room. Keep clutter to a minimum, add a few decorative statement pieces, and finish off the room with perfectly placed lighting.

Top Tips for Illuminating and Expanding your Decorative Interiors to Make Every Inch Count

Hang several sets of drapes along a wall to give your small room personality. This can work instead of paint and wallpaper. You will give the illusion that there are windows hidden behind the drapes, rather than just a wall or tiny window. You can also hang the drapes higher than the window sill to create a taller looking room.