An electrical circuit works as a loop where electricity flows from a source and then returns to that point again after powering the device connected to it. The power flow interrupts or stops if the path is broken. There are also receptacles, fixtures, or switches joined to the course through different types of electrical wiring.

Every electrical circuit has a specific breaker or fuse that controls it. Inside the main electrical panel of your house, you will find reference numbers to identify which breaker or fuse is assigned to which circuit. Mapping of them is a standard electrical safety procedure.

power company supplies electricity to your home through the transmission and distribution lines. The energy enters the service panel, also known as the fuse or breaker box, after passing through a meter. Then, the box has three wires (hot, neutral, and ground featuring insulation of different colors) that do the jobs of transmitting the power to an external outlet, returning to the source, and providing the ground.

The wires of your home are generally installed in three ways:

It’s a wiring system where a single electrical circuit supplies power for several devices. There are various housing boxes from where both hot and neutral wires emerge and run along the route. They branch off to single receptacle and fixture.

It’s the most common of all the systems seen in residential settings.

Switch Wiring

Installed on hot wires, such a system has switches that either transmit or break the current flow to various devices or lighting fixtures. A switch changes its position to allow or interrupt the flow of electricity to electrical machines and instruments.

The system routes the hot wire through various fixtures before joining to the neutral one, which then carries the power to the source. It’s the least used and most inconvenient of all the types because it connects the devices, i.e., lights in a series. So, the circuit breaks off when just one light is burnt out.

Parallel wiring is the best option for household settings because it does not break even when one of the connected fixtures goes kaput. Nevertheless, remember not to run too many electronics from one source because each circuit can carry only a maximum electrical flow.

We’re excited to announce that we now offer

Multi-panel light systems are designed to add a point of interest and liven up a room. They can be used for numerous applications, including dental office lighting, lobby lighting, hospital lighting, classroom lighting, waiting rooms, conference rooms, basements, and more. A choice of stock cloud images can be split into two-, three-, four-, or six-panel displays depending on the chosen panel size. Custom panels can include any image and number of panels, and they can be arranged in any way.

Each Even-Glow® LED panel light uses perimeter-mounted LEDs with an optical diffuser to emit natural white illumination without visible bulbs or hot spots.

Dimmable and non-dimmable panels are available for custom or static levels of light. Dimmable panels consume just 40 watts of power, and non-dimmable 2-by-4-foot and 2-by-2-foot panels consume 50 or 72 watts respectively—significantly less than fluorescent fixtures. The panels have sturdy white or black aluminum alloy frames. They operate within a 100-277V AC range and are designed to last three times longer than fluorescent troffers.

Take advantage of Custom Electrical Services and there partnership with MidAmerican EnergyAdvantage® Trade Ally Partner program.  Receive a free in business assessment on your current lighting.  Let us do the leg work and show you the HUGE savings.  Take advantage of the most current rebates available for your business.  Go green and receive some green at the same time!  LED is here to stay so start saving today!

LED lighting (Light Emitting Diode) is dramatically more efficient than standard fluorescent lighting.  With T12 fluorescent lamps drawing as much as 40 watts per lamp, LED lamps currently can draw as little as 18 watts per lamp.  That’s over a 50% reduction in energy when compared to a standard T12 lamp!  Not only do you get a 50% reduction in energy cost you can save on cooling cost too!  When replacing LED lamps with standard incandescent, high pressure sodium, and mercury vapor lights the new LED lamps DRAMATICALLY reduce the amount of heat produced.

Not only does the LED lamp save you money in energy cost you can also reduce your maintenance cost!  Currently LED lamps can last as much as 50,000 hours which is a much longer life span when compared to a standard lamp.  Paying a maintenance worker to change lamps can be expensive.  Especially for hard to reach areas that require large ladders or specialized equipment to reach the lamp needing replaced.  Even worse is having unqualified staff change your lamps.  Having unqualified people perform this task can lead to electrical shock, falls, or other injuries.

Contact us today and start saving!  Custom Electrical Services will come to your business and perform a free no obligation assessment.  We have replaced THOUSANDS of fluorescent lamps with the new LED in and around the Des Moines area the past year alone.  Businesses are starting to notice the advantages of LED and the amount of volume has gone up dramatically since!  Call today and schedule your assessment and take advantage of our MidAmerican EnergyAdvantage® Trade Ally Partnership.Thank you and look forward to hearing from you soon!