Under-Cabinet LED Lighting Kit is available for purchase that contains a plug-and-play LED light strip, push-button dimmer, remote, 12V power supply, and connection accessories. If you want to build a custom kit, follow the steps below the diagram to ensure that you get everything you need.

3. Select a dimmer or controller

For single-color LED strip light setup

Select the power supply large enough to operate the amount of LED strip light you need to use. If you want to control the brightness of your light strips, you will need a Single-color dimmer shown installed with a non-dimmable power supply

For color-changing LED strip light setup

Follow the instructions above for the single-color light strip setup. However, instead of a dimmer, use a RGB color-changing light strip installation

4. Use an LED amplifier for long runs of strip

Depending on the strip chosen and its maximum run (the number of strips that can be installed consecutively before needing amplifiers), you will need to install an light strip interconnect cables. It is best to purchase a length of strip that is more than your application requires. For example, if your project requires 8 1/2 feet of strip, we recommend purchasing 9 feet of strip to ensure that you have everything covered.

Well, it happened again. The kitchen and bath pros who make up the via www.marketwatch.com

Giant windows are great if possible. That’s a big IF, though. Sometimes, natural light isn’t an option, either because the laundry room is subterranean or otherwise windowless. Obviously, in the image below, natural light is not an option. Yet, the color temperature of the ceiling light is neutral enough to make this laundry room bearable while another, poorer lighting choice could have made this tiny laundry room annoying to visit and kind of scary.

You didn’t think I was going to avoid talking about lighting solutions just because natural light is such a great option for laundry rooms, did you? So, how should you light your laundry room? For any type of laundry room, there are some fundamental guidelines.

I’ve already suggested that you ALWAYS USE NATURAL LIGHT, when and if possible. And for your other light sources? Consider choosing lights with a Color Rendering Index (CRI) of as close to 100 as possible. A light source’s CRI is, in effect, a metric by which to compare the ability of artificial light to render color as well as the sun. 100 is the maximum CRI. Some lamps, like low-pressure sodium lamps, can actually have really low CRIs, while there are now some LED lights with CRIs of 95 – 98. If the sun isn’t shining in your laundry room, there are plenty of excellent options that closely match natural light’s ability to render color and help you keep your clothes clean and fresh as can be.

Layer your lighting.

OK, so this is the main theme in pretty much all lighting design guides. Layering your light pretty much means that you should think about general light, accent lighting, and task lighting. In the main section of a house, this might look like mini recessed ceiling lights with square bronze trim, elegant track lighting to spotlight a painting or picture, and a reading light by the chair or some under cabinet lights illuminating the bar counter. In a laundry room it might look like the image below.

Sometimes, in larger laundry rooms, you can have all three kinds of light. But, generally speaking, laundry areas are on the smaller side and are too focused on pragmatism for decorations that would benefit from accent lighting. Keep in mind that this is a generalization with exceptions galore, but, generally, the two kinds of lighting you’ll find in laundry areas are ambient overhead lighting and task lighting, and this scheme usually takes the form of a ceiling light or two and under cabinet lighting.

Creative Options.

It is virtually impossible that you don’t face electrical problems around the home from time to time. It could be a tripping breaker or a fused bulb, but sooner or later, there will be an electrical problem that you have to deal with. Now, most homeowners are adept at taking care of the small electrician work, i.e. taping up wires or replacing a blown fuse. However, there are certain situations where calling in a professional electrician is the best course of action. Yet, there are many people who don’t consider this an option, usually till it’s too late and they have no other recourse.

The reason for this hesitation is a few common myths about electrician work doing the rounds. It is true that there are some homeowners who have the requisite knowhow to take care of the electrical stuff around the home, but they are a rare breed. For the average Joe and Jane, it is a good idea to leave the work to a professional electrician service. However, since people tend to believe in the common misconceptions, calling an electrician is not a priority for them. They end up allowing time for the problem to exacerbate, which means greater expense, greater risk, and greater inconvenience

Now, surely you would be wondering what these abovementioned misconceptions are and if you perhaps believe in a few of them. Let’s take a look at some common myths about electrician work and debunk them:

As mentioned above, most people don’t reach out for the phone to call an electrician even when they see there’s a problem which requires an experienced hand. The myth is that they feel an electrical service would charge more if they called them over for an emergency. They instead hope that the problem isn’t major and the impact would be minimal. They wait for the sparking outlet to cool down or the tripping breaker to stop tripping before they consider calling in a professional. What this does is allow the problem to worsen, which means they have to spend more money to get it fixed later on.

Now, compare that cost with the charges of an emergency electrician service and you will see you got the short end of the deal. This is why it is important that you call up a professional electrician without delay and deal with the problem there and then. In fact, you give the electrician a better shot at fixing the problem by calling him in quicker

You might be all for the DIY movement and like doing things around the house but this doesn’t you put your safety at risk by attempting to fix electrical problems you have no idea how to deal with. One wrong move and you could end up causing more harm to the system than the actual problem did. Unless you are absolutely sure you know what to do, don’t ever attempt to fix an electrical problem at home. It would only meaning put your safety at risk. Not only this, you might end up causing damage to appliances or electrical outlets around the house. Just because it looks easy doesn’t mean its easy.

Granted, most homes today incorporate wood as a major building material. And you can probably bet your house on the fact that wood isn’t a good conductor of electricity. However, this doesn’t mean an electrical problem can not cause damage to your wooden flooring or fixtures. Keep in mind that a short circuit is all it takes and the entire room could be on fire. Just because your home is ‘wooden’ from all sides doesn’t mean you keep ignoring electrical faults, even if you have insurance!

This one is perhaps the most common misconception people have about electrician work. They aren’t prepared to listen to what the electrician is telling them about. Just because it’s your home doesn’t mean you know more about the electrical system installed than a professional whose bread and butter is fixing electrical problems. You might have your ideas about how the work should be done but you should trust the professional electrical service you have called in when it comes to electrical work.

These are only a few of the many misconceptions people have about electrician work. It might give you an ego boost to be able to take care of handyman jobs around the house but electrical work is intricate and potentially dangerous. So, it is in your best interests to leave it to the professionals