hazardous location lighting.

The National Fire Protection Association (NFPA), National Electric Code (NEC) 70, defines hazardous locations through a system of classes, divisions or zones, and groups that products must be labeled as to be used in those areas. Hazardous area classifications are based on the general type of substance or material that is present in the area, the likelihood that it exists, and more detailed specifics, such as ignition temperatures and combustible properties.

Class I:

A Class I hazardous location contains flammable gas, liquid-produced vapors, or combustible liquid-produced vapors that can be present in quantities large enough to create an explosion.

Typical locations include airplane hangars, vehicle paint shops, commercial laundromats, and gas plants.

Class III:

This type of location contains easily ignitable fibers or flyings in the air but that aren’t likely to be in suspension in amounts large enough to cause an explosion.

Typical locations include textile mills, cotton mills, and sawmill facilities.

explosion-proof LED lights that are safe for use in a variety of hazardous locations. Click each photo to see details, including a complete list of classifications and certifications.

If you have any questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

Although a lot of people know what surge protection is, some people don't have the slightest clue. This article will explain what surge protection is and help you understand why it's important.

What Exactly Is Surge Protection?

Surge protection is what protects your electronic devices and appliances from spikes in electrical voltage. A surge protector will basically limit the amount of electric voltage that is allowed to reach the electronic device or appliance by blocking or grounding unwanted voltages.

Different Types of Surge Protectors

Surge protectors come in two different forms. You are probably pretty familiar with a power strip surge protector, but there is another popular type of surge protector that is designed for your circuit breaker panel. When selecting a surge protector, make sure that you chose a higher level of joules. This is because you have more protection as you enter the higher numbers of joules.

Benefits of Surge Protection

When it come to surge protection, there are an abundance of benefits, including the following:

Additional Outlets – First off, if you use a power strip surge protector, you are provided with a number of additional outlets that you can use to plug in more devices and/or appliances into a single outlet. Saves Energy – Also with the power strip, you can save on energy usage. This is because there is an on/off switch on the power strip that allows you to switch off all plugged-in devices so that they are pulling electricity when they are not being used. Protects Devices – If there is a major storm in the area, then a surge protector (for the circuit or the power strip type) can help keep plugged-in devices and appliances from shorting out should there be an excessive amount of voltage being transmitted or a power surge, such as from a lightning strike. Increased Warranties – As a general rule, if you have your electronic items plugged into a surge protector and they are damaged despite the protection that the surge protector should have offered, your device or appliance will typically be replaced.

If you’re dying to install your new instructions for how to install a light bar. These instructions include options for installations with or without a wire harness and for connecting to existing LED lights. Installation will vary based on the type of vehicle, existing lighting setup, and chosen wiring method, but these instructions can serve to give you a general idea of the process. Light bar mounting instructions are also available and are listed by WH-DTS10, WWH-DTD30; (ATP) WH-ATPD20, sdoptional mounting brackets; be sure not to overtighten the hardware (you will need to adjust it in step 7).

3. Route the lighting side of the wiring harness from the battery to the light in a safe, secure manner. Connect the harness to the light. Be sure to avoid heat sources and any moving parts while running your wires. Prolonged chafing of the wires may lead to a short in the circuit. Typically, following the vehicle manufacturer’s wiring harness is a safe path to follow. Some lights may not have DT or ATP connections on them, but the connectors can be added from the harness kit or purchased separately (ATP-FPT).

4. Continue to route the switch portion of the harness to the desired location of the switch. The switch may need to be unplugged from the harness to make routing of the harness easier. An optional remote-controlled switch (RS-x) are also available with different legends.

5. Connect the black (ground) wire with the large ring terminal from the harness to the negative battery terminal. Connect the red (power) wire with the large ring terminal from the harness to the positive battery terminal.

6. Secure the relay to a suitable location, and test the light to make sure the circuit works.

7. Finally, aim the light in the desired direction, and tighten all mounting hardware.

3. Connect the black ground wire of the new light to the ground wire of the old light with solder and heat shrink tubing (PSC-x). Connect the red power wire of the new light to the power wire of the old light.

4. If the new LED work light or off-road light bar has an ATP or DT connector that you wish to utilize, corresponding ATP (DT-MPT) pigtails are available.

5. Finally, aim the lights in the proper direction, and tighten all mounting hardware.

1. Find a suitable mounting location that will allow for running wires and mounting the LED light bar. Mark where your holes will be for the light bar brackets or mounting feet. Check behind drilling locations to ensure nothing will be damaged. Drill appropriate-sized holes.

2. Mount the lights with the provided hardware or with DT-MPT or RRS-SP, RRS-SPx, or RCS-RF25A) under your hood to speed up install time and avoid routing wires through your vehicle’s firewall. Route another run of red wire from the pigtail adapter (connected to the light) to the output terminal of the switch. Be sure to avoid heat sources and any moving parts while running your wires. Prolonged chafing of the wires may lead to a short in the circuit. Typically, following the vehicle manufacturer’s wire harness is a safe path to follow.

4. Be sure to double-check for all obstructions and proper clearance. Drill an appropriate sized hole for the switch, and mount it.

5. Connect your black wire to the negative battery terminal. Connect your red wire to the switch input terminal and to the positive battery terminal with an appropriate-sized fuse holder (MAF-x) installed within 18 inches of the battery. You will have to cut your section of red wire to allow for the fuse holder to be installed between the switch and battery. Connect your other run of red wire to the switch output terminal.

6. Finally, aim the lights in the proper direction and tighten all mounting hardware.

If you’re searching for a way to control your lighting from anywhere and without flipping a switch, Wi-Fi LED lights are the perfect products. With a Wi-Fi LED Controller Hub, you can control compatible LED bulbs, LED flood lights, and LED strip lights with your Android or iOS-enabled smartphone or tablet. The Milight 3.0 app, along with a Wi-Fi compatible controller when necessary—allows you to power lights on and off, control multiple zones of lights, select from thousands of colors, choose from various single-color and color changing modes, and control brightness and speed.

Wi-Fi compatible flood lights are great for landscape lighting, tree uplighting, architectural wall washing, and other outdoor applications. These LED landscape lights are available in 30- and 50-watt versions and have separate LEDs for either white or colorful illumination. They plug into a standard 3-prong outlet and can be easily connected to a Wi-Fi hub. Connect multiple lights to the hub, and synchronize their color, brightness, or mode with your smartphone or tablet.

If you cannot answer this question with confidence please ask yourself…  WHO DID I JUST LET INTO MY FAMILIES HOME?  Many people have made this mistake and some paid the ultimate sacrifice.  Some just fell victim to theft, such as the scam where a handyman would offer services to gain access into someone’s home and then steal from them.  You can read more about this crime here.  Unfortunately, there have been more victims experiencing much worse crime.  We do not need to get into the details for the purpose of this blog but we have all heard about them on the news, social media and the stories are very easy to find and numerous.

An electrician on drugs is a recipe for disaster.  Yes an electrician on drugs may not intentionally try to harm you, but how many traffic deaths happen every single hour in the US from people under the influence of drugs or alcohol?  You wouldn’t let a person under the influence of drugs or alcohol drive your children to school, so why would you let them perform electrical work in your home?  Our service electrician’s undergo a drug screen and are also subject to random checks throughout the year.

Our service professionals undergo a thorough background check before being hired.  We won’t just send anyone into your home.  We are going to send a true professional that meets our stringent guidelines.  He is not going to steal from you.  He is not going to harm you.  He is there to help you.  Our electricians truly care about you and the work they are performing for you.

We are here to serve YOU, our customer!  We want a customer for life.  We are not here to steal from you or take advantage of anyone!  We are here to provide a VALUABLE service to you.  We will stand behind our work and make sure you are 100% satisfied.  We guarantee it with the way we act in our organizations culture, and also in writing.  If for some reason you are not 100% satisfied please let us know.  We will not leave until we get it right.  It’s our guarantee to you, our valued customer.

Many contractors say that.  You win some you lose some.  Not with us!  No we do not get every job we bid on, but we realize there may be other factors at play.  What we care about is you truly understand the price presented to you.  You know what options and solutions you have.  You know what will be done, how it will be done, and that we will stand behind our work.  You know the value you are getting when you choose Custom Electrical Services.

It’s common to be nervous when a service person shows up to your home.  Your thinking how much is this going to cost me?  Am I getting the best bang for my buck?  Do I have other options?  At Custom Electrical Services, our technicians are trained for this.  We will work to put you at ease and make sure you fully understand everything presented to you.  We will take the time to fully evaluate your situation and present it to you in a professional manner that you can understand.  Price is not everything.  We will not change the price of the work performed.  The straightforward price you receive will not change if it takes our electrician longer than expected.  You won’t be left thinking, “I hope he can work faster so my bill will be less”.  Lets think about this common statement for just a second.  Would you really want a mechanic hurrying up to put new brakes on your families car?  Of course you wouldn’t!  You would want the mechanic to perform the job as best as possible.  And that is our promise to you.  Give you the best possible job and the most reasonable rate possible.  We are professionals.  We are Custom Electrical Services.

But wait!  A Custom Electrical Services technician is not just there to give you an estimate or fix that minor problem you called about.  We are here to truly help you.  When is the last time someone checked the connections in your electrical panel?  1 year, 10, or never?  Electrical connections can loosen over time.  Electricians are trained to look for this.  As part of our service fee we will inspect your breaker box or electrical panel.  Identify any problems such as loose connections, non code compliant breakers, under sized wire, corrosion, heat, and more!  What if you have an old Federal Pacific Panel and you didn’t even release the dangers they present.  Our technician will identify and let you know of any potential safety problems.

Are all of your smoke alarms and carbon monoxide alarms functioning properly?  For no additional charge we will test all your smoke alarm units and identify any that are not functioning properly.  We will also replace all your batteries at the same time.  It is all part of the service designed to keep you, your family, and your home safe.  Our commitment to you!