Choosing a company to install solar panels is a bit of a tricky task. There are many choices and they’re not all reputable. We’ve created this quick guide to walk you through the process of choosing the correct solar installers.

You can cut to the chase and find the best rates and incentives by contacting the Electric Connection. We’ve help Southern California area residents get the best deals on solar panel installation and make the most of the various rebate packages available to them. If you want a quick quote and understanding of the process and how you might install solar panels at no cost, give us a call today.

Many people have an old and unreliable electric service panel installed in their residence or office. You might be interested in getting a new panel installed but are concerned about the cost or time required. However, the process is quite simple; which means it won’t inconvenience you or cost lots of money. In this article, we will give you an overview of the installation process so that you know what to expect when you have us put in a new electric service panel.

Demand for the electric cars has been on upward trend over the last few years. However, manufacturers and car owners still face a challenge due to the limited battery capacity which necessitates the need to keep on recharging after traveling a certain distance.

Despite the benefits of charging the electric cars at home, most residential installations, especially the older ones, may not support the systems. But the consumers can upgrade these to accommodate the additional load. The upgrade depends on the existing wiring, panel, capacity and charging station power requirements.

electrical wiring and capacity, and the charger voltage and level. The electric car owner must first decide on the preferred type of charger and time, and then compare its power requirements with the existing capacity at home.

Some chargers require 120V while others work on 240V and each takes different times to fully charge the batteries.  Higher voltages will require dedicated circuits and upgraded wiring, breakers, panel and service entrance.

Other upgrades include the price plan, metering, and compatible outlets or provision for hard-wiring. If you are installing a DC charging is very fast; it uses about 400-volt direct current and is capable of reaching full charge in about 15 minutes. This is a complicated method and may require significant upgrades in the home electrical system. It is also very expensive and rarely used for home charging.

upgrade your wiring or install the product if you system capacity can support it.

It is essential to ensure that the electrical panel and dedicated circuit have the capacity to handle the system. The installation of the charging station is similar to other high power equipment, such as clothes dryer, and should comply with all the electrical codes and requirements.

Each charging station should be on its own dedicated circuit with adequate capacity and protection. However, the it can still be connected to an existing 40 Amp circuit, such as the one for the kitchen, provided that there is a locking mechanism to ensure that only one load is connected at a time.

Charge stations may be hardwired or plug-equipped to connect to the electrical outlet. For the plug type charger, you will need to have an electrician to wire the compatible electrical receptacle according to the codes.

You may add ventilation to improve the cooling of the charge station if it is in a location with poor air circulation.

Charging electric cars at home is the desire of the majority of EV owners. It cuts down on the cost and time to drive and wait at a public charge station. In addition, it does not interfere with the daily activities of the electric car owners since they can charge at night.

Unfortunately, there are several homes without the provision or capacity to support the charging stations. However, the EV owners can consult the car dealers, and then engage qualified electricians in upgrading the existing electrical wiring. This will enable them to conveniently charge at home.

This is the second year the United States is focusing its efforts to really bring energy conservation to the forefront of conversation. We have all heard about fossil fuels being depleted and the demand each house puts on the power grid. We are constantly told we have to be more frugal with electricity. It is for the benefit of the world as well as our bank accounts. Saving energy will ultimately save money on the electric bill and make each one of our carbon footprints just a little bit smaller. Your Burbank electrician and the team at The Electric Connection wants you to know about Energy Action Month, which is this October.

Right now, the government in the United States is taking action to reduce their own energy consumption. It starts at the top and by their good influence, hopefully citizens will follow suit. An electrician in Burbank has some ways that will help you take action this October and develop new habits that will ultimately lead to less energy usage, lower electric bills and a smaller demand on today’s power sources.

Things to do right now include;

*Turn up the AC a couple degrees or turn up the heater a couple of degrees *Switch out those old bulbs with LEDs (this may require a different light fixture)

Things to Schedule

*Get a ceiling fan installed by an electrician, Burbank homeowners can really save money on their heating and cooling costs with this one device

*Schedule an energy audit to get an idea where you use the most electricity and how you can cut back

These are 4 easy, actionable steps that will help you save money and do something great for the environment. Give The Electric Connection a call if you need a new light fixture or ceiling fan installed.