High bay fixtures are a critical part to any high ceiling building. Since these high bays require such large lumen output, the cost to run them can be high. By converting to LED high bays, you are able to reduce your energy consumption in your most energy intensive fixtures by up to 75%.

In this post, we are going to cover (non-comparatively) 5 top types of LED high bay lights for this year, 2017. While not every item on this list will apply to you and your building, there will surely be one or two for your needs if you currently use high bay lights in your facility.

If at any time you come across a question, want more information, or are actually interested in implementing LED into your building;

These traditional commercial high bay lighting fixtures look a lot like what we think a normal high bay should look like. They are reminiscent of traditional style Metal Halide and High Pressure Sodium high bays and offer your typical round high bay look.

These high bay LED fixtures can replace both 400W and 1000W Metal Halide. The smallest unit is 80W producing 10,240 lumens. There is a 160W unit producing 19,200 lumens. This would be a good 400W Metal Halide replacement. And the largest unit at 400W produces 51,200 lumens. That’s 128 lumens/watt. And, USA Made backed with a 10 year warranty.

These LED high bay Lighting fixtures look a lot like a troffer style panel. The advantages of this type of fixture are the LEDs are spread over a larger area. This has 2 main advantages – Great light distribution and large heat sink. It is important to realize these lights are particularly good at light distribution, creating an even distribution.

These high bay LEDs can replace both 400W and 1000W Metal Halide. The smallest unit is 120W producing 15,360 lumens. There is a 150W unit producing 19,200 lumens and the largest unit at 300W produces 38,400 lumens. USA Made backed with a 10 year warranty like the traditional style high bay.

A retrofit kit utilizes your existing fixture and replaces the bulb and ballast with the LED head and the LED driver. These retrofits can be significantly more economical than replacing the entire fixture, for obvious and not-so-obvious reasons. One of which being it’s cheaper to buy. Another being it’s (typically) cheaper to install as well. For this reason, our high bay retrofit kits HAD to make it on the list of the best high bay lighting options.

Whether it has to do with a simple home improvement or a more in-depth renovation, a permit for electrical work is required to obtain permission from the governing authority to go forward with the project. Permit pulling—requesting a permit from a governing authority, which could be State, County or City —can be challenging for homeowners who are not familiar with electrical plans. but the process of pulling permits for electrical work is fairly straightforward if you understand and meet all requirements for electrical contractors.

Each city, county and state can have varied building codes, so it is important to use a professional who is versed in navigating this process. Permit pulling requires first submitting an official application that includes a schematic of what electrical work is going to be done. There will be a permit fee involved to cover the application cost, the review and the inspection. Once a plan is approved, a permit will be issued, and work can begin. On-site inspections will be conducted to ensure that all of the work conforms to the permit as well as building codes and plans. Depending upon the size of the project, there may be more than one inspection, usually a rough and final or possibly partials of either. These inspections serve to protect homeowners from faulty or possibly hazardous work. A code official will come by at the project end in order to provide all required documentation. Final approval will only be given once full code compliance is met which could mean NEC, UBC or IBC regulations. If the homeowner is completing the electrical work as a do-it-yourself project, it may take multiple visits from the code official before a final approval is provided, depending upon the skill level of the homeowner.