You may not think about it often, but the power coming into your home travels a long way before it gets to your refrigerator, air conditioner, or any of the other appliances in your home. On the way, electrical current encounters fluxuations and interference from things like other appliances, machinery, and low quality wiring. That “Dirty” power can cause inefficiency and disturbance in your appliances, making things like the motors in your refrigerator and air conditioner, the circuits in your television, and all of your other electrical gadgets work harder than they need to, and wear out faster than they should.

A Power Conditioner will take the electrical current coming into your home and “clean” it, using filters to isolate power outlets and remove interference. This provides the correct voltage level to sensitive electrical equipment, allowing it to work safely and efficiently at the correct voltage.

Because power conditioners help your appliances run more efficiently, they can also lower the overall cost of running these appliances, and extend their lifespan. For more information about home power conditioners or for help on any electrical project in your home, please reach out to Dallas Electrician, ElectricMan Inc. by phone at 972-792-7270, or through the contact form on our website at www.electricmaninc.com

Have some renovations or home additions in the works for your Tampa home? Congratulations! But before you get too excited, the certified electricians at Hoffman Electrical would urge you to take some things into consideration. Home additions almost always mean electrical work, and there are a lot of factors to consider if your end product is going to result in proper function.

The team of master electricians at Hoffman Electrical always takes your needs seriously! If you’re about to perform some home additions, we are your go-to source for important information and superior service. Wondering what needs to get done? Let’s get started!

If you’re planning on selling your home in Maryland, Virginia, or Washington, DC, it’s extremely important that you make sure everything is up to code. Some code violations are illegal, others can be dangerous—some are both!

Wiring mistakes – most wiring mistakes are made by handymen doing electrical work instead of certified electricians. Among the worst we’ve seen are electrical systems that were hooked up using extension cords instead of dedicated electrical wires!

Overcrowding with too many wires – overcrowding is another sign of a contractor who didn’t know quite what they were doing. Since poorly maintained wires can get hot, any place where there are masses of wires packed tightly together can create a major fire hazard.

Exposed wires or junction boxes – frayed or exposed wires can pose a major electrical safety hazard and should be either replaced or patched up. And while junction boxes should be within reach, they should not be so easily accessible that they can accidentally be touched.

Ground Fault Interrupters (GFI) outlets or breakers not working properly – GFI outlets are especially important for the kitchen, bathroom, and anywhere else where water or humidity could create an electric shock risk. If these outlets are not working properly, you could be in danger without even realizing it!

Mixing line- and low-voltage wires together – the National Electric Code (NEC) expressly forbids this, but we often see it, especially when dealing with HVAC installations.

Light fixture or ceiling fan installed without a junction box – junction boxes are required to be installed so they are always accessible and are used to run multiple conductors in two or more directors. The most common problem we see is junction boxes installed out of reach in a concealed wall or ceiling space.

Missing or damaged switch and outlet covers – plate covers on switches and outlets are important for preventing electric shocks. If you’ve recently painted or remodeled the room, you may have taken the covers off. Make sure you put them back on!

Damaged outlets – damaged outlets can cause appliances and anything plugged into the outlet to malfunction and can also create a major fire risk.

These days, many home sellers are seeing the value of having an electrical inspection prior to putting their home on the market. Having the ability to correct any electrical code violations ahead of time may help in avoiding delays in the negotiation and sales transaction.

If you’re planning on selling your home in Maryland, Virginia, or Washington, DC, call Kolb Electric! We can perform an electrical inspection and make any necessary electrical code corrections. Don’t wait—call us today!