When we talk about reducing energy use around the house, it’s frequently in the context of saving money on monthly utility bills. It makes sense — money plays a role in so many decisions that we make, from where we work to what kind of car we drive to where we go shopping. But it turns out that people are actually more motived to save energy because it’s better for the environment and their health than because of money, according to a recent study by the University of California Los Angeles. The result is contrary to the expectations of even the test participants themselves.

Money vs. Pollution, Health

The study broke up households into two categories — one of which received weekly reminders about how much money they could be saving by cutting back on their energy usage, while the other was told about all the air pollution they were creating, and how it could play a role in children contracting asthma and cancer. The researchers gave both groups analytical tools to track how and when they used the most electricity, as well as comparisons to their neighbors to give them benchmarks to shoot for.

In the end, the group that was nagged about money failed to change their habits to include any efficiency measures. The health and environment group, on the other hand, slashed their energy usage by an average of 8 percent — and families with children cut back by 19 percent.

Won’t Somebody Think of the Children?

Before the study, participants were asked what message they thought would be effective in persuading them to cut back on their electricity usage, and most of them said that money would be the prime motivating factor. The results proved otherwise.

“We’re finding that you have to bundle the public good with the private good,” said Magali Delmas, the study’s principal investigator and an environmental economist at the UCLA Anderson School of Management, said in a press release. “Our message about health and the environment reminds people that environmentalism is also about them and their kids.”

Researchers speculated that the amount of money at stake simply wasn’t high enough to prompt people to act, but when homeowners were motived by a combination of benefiting their own families and being good citizens, they did take action.

“The message reminds you that you’re hurting people and the planet,” one of the study participants reported afterward. “It made me more conscious of the energy I was using.”

Go Beyond the Pocketbook

The study can be a lesson for officials and utility companies who seek to encourage people to cut down on their energy consumption. While everybody likes saving money, sometimes you need to appeal to more than just their pocketbooks to get people to act.

Why not take advantage of all three benefits? By taking simple steps to lower your energy usage, you can cut back on your bills, help the environment and protect public health all at once. If you aren’t sure how to get started, call an expert to give your home an energy audit and put you on the path to a cleaner, healthier and more frugal lifestyle.

When it comes to creating stunning interior spaces in their homes, property owners pull out all the stops. They hire the best designers, choose the best materials and hire the best contractors for all the installations. While all these aspects are important, it’s also important to have the right kind of lighting. After all, you do want your home to look as stunning after dark, as it does during the day, don’t you?

However good lighting is never a matter of chance. It takes a great deal of planning and choosing the right fixtures and lighting systems and bulbs to ensure you are able to achieve the effect you want. Lighting has the potential to completely transform the look of your home and it can turn your house into a welcoming and comfortable home.

Regardless of how well thought-out all the other details in your décor and interior design are; all your luxurious flooring, stunning wall coverings and superb furnishing won’t have the right impact if your lighting isn’t planned well. Here are some aspects you should consider while lighting any residential space:

Every room will need a different type of lighting; and this will be dependent on the activities that take place in that room. Here are some pointers:

If your home has high ceilings, you can use recessed lighting- these fixtures are inserted into ceilings and the fixture is fitted inside it. Adding dimmer switches to these directional lights allows you the flexibility to change the lighting effect from subtle to full-bright.

It’s a good idea to add this in most rooms; it’s especially important that you have night lighting incorporated into kid’s rooms and nurseries. Table lamps and wall sconces are a good option for these spaces.

Many people like to have chandeliers in these rooms. Choose these smartly and ensure that the one you opt for doesn’t date the space. If you have very elaborate and embellished interiors, a traditional, opulent chandelier might look stunning, but it will look completely out-of-place in a modern-styled home.

For the latter, you should opt for more minimalistic chandeliers that have simple designs with small and ornate crystals to throw more light. No matter what type of décor you have, it’s important that you measure-out the entire space as well as the ceiling height in every room before you order pendant lights or chandeliers, and ensure there’s sufficient head room under these fixtures.

We at Allround Electrical are licensed and insured electrical contractors. We can provide consultation on different types of lighting systems, and offer a range of electrical services to commercial and residential customers. For more information, contact our friendly team today at this number – 1300 169 263. You can also write to us at this email address. You may also reach us through this online contact form.

Thanks for reading,1300 169 263

Smoke detectors are very crucial pieces of safety equipment in your home and it is now also mandatory in NSW that residential properties have at least one smoke alarm on every storey. Not many people are aware of this, but a large percentage of fires in homes cause massive destruction because the smoke detectors didn’t function the way they should have.

The unfortunate fact is that we almost always take these fixtures for granted; we get them installed and rarely even notice they are there on the ceiling until they get set off accidently or when their batteries go dead. Improperly installed smoke detectors or even poorly-maintained ones will only end up letting you down exactly when you need them.

It’s important that you make smoke detector maintenance a part and parcel of your regular home maintenance routine. There two main types of smoke alarms used on residential properties:

These have minuscule quantities of radioactive material that reacts to the particles that are emitted when a fire breaks out, and that sets-off the alarm. These alarms are extremely effective in the detection of fast-flaming fires in which there isn’t too much of visible smoke.

These have photocells with a light beam that shines away from the cell. If smoke enters its test chamber, the smoke particles scatter some of the light; this hits the cell and triggers the alarm. These types of smoke detectors are ideal for detecting smouldering/smoky fires, which is how residential fires typically are.

Regardless of the types of alarms installed on your property, it doesn’t take more than a few minutes annually to ensure that these devices are in a working order at all times. The few steps you should take are:

Aside from the regular maintenance, it’s also very important that you consider how many smoke detectors you have and how they are powered. The best way to increase the effectiveness and safety of these devices is to upgrade your home’s smoke detection setup. The things to focus on are:

We can install and maintain smoke detectors on your residential or commercial premises. For more information, contact the Allround Electricals team at this number – 1300 169 263. Alternatively, you can also write to us at this email address.

Thanks for reading,1300 169 263

Let’s face it—halogen and incandescent headlight bulbs are a thing of the past. fanless, driverless LED headlight bulbs were used in this installation.

If your vehicle allows for horizontal adjustments, mark the distance between your headlight centers with two vertical lines of tape. These lines are important for projector headlights and/or lining up beam cutoff points. Repeat these tape lines for your other headlight.

6. Remove your headlight assembly if necessary, remove the current bulbs, and install your new LED bulbs. Check your owner’s manual for specific instructions on how to replace your headlight bulbs.

7. Depending on your vehicle, you may have to adjust your headlight beam before or after the assembly has been reinstalled. Your owner’s manual will explain how to adjust the beams. Align each headlight so that the top edge of the beam is at the same height as your horizontal line(s). If your headlights can be adjusted horizontally or produce two light cutoff points, use the vertical tape lines to align them properly.

3. Shake the vehicle to ensure that your suspension system is settled. For more precise adjustments, inflate all tires to their designated psi capacity and have someone sit in the driver’s seat. Also, make sure that your vehicle’s gas tank is at least half full.

4. Measure from the ground to the center of your headlight assembly where the bulb is located. This step must be done for all vehicles. If your vehicle allows for horizontal headlight adjustments in addition to vertical adjustments, it’s important that you also measure the distance between the centers of both headlight bulbs. The vehicle featured in this video allows for vertical headlight adjustments only; therefore, center lines aren’t necessary but are shown for demonstration purposes.

5. Turn on your low-beam headlights. Using painter’s tape, mark your headlight measurements on a flat wall. Measure from the ground up, and apply a horizontal line of tape to the wall; this line represents the top of your headlight beam. You can either apply one long, continuous line or small sections where the brightest areas of the headlight beams are shown.

If your vehicle allows for horizontal adjustments, mark the distance between your headlight centers with two vertical lines of tape. These lines are important for projector headlights and/or lining up beam cutoff points.