Bryant Electric Service was recently inundated with calls the morning after a strong wind/thunderstorm blew through Austin.  This happens every time.  Although many calls were customers needing their power restored after tree limbs took down their overhead power line, there were also many calls wanting our service techs to come out to check their whole electrical system because of nearby lightning strikes damaging many of their home appliances and electronic devices.

With the enormous amount of electronics that are now being installed in almost every device that can be plugged into any power or phone/data outlet, it has become evident that having whole house power/data surge protection installed is imperative.

When lightning strikes it creates a huge static electrical field that, like the bolt itself, seeks the easiest path of least resistance to the ground.  The easiest path for this static current is your overhead electrical and phone/cable lines that run up and down your street and all of which connect directly to your house.  When this happens, it destroys the very delicate, low voltage instruments that are now installed in most appliances:  refrigerator, dishwasher, microwave, oven, coffee makers, washer/dryer, A/C and furnace, thermostat, garage door opener, sprinkler system control, etc.  These are all affected by power surges going throughout your electrical wiring system.  Then there are your TVs, computers, modem, hand-held charging devices, VCR, TV signal box, Bluetooth and your telephone, if you still have one, and these are all affected by the power surge through your phone/data cables.

If you are interested in receiving a cost estimate to have this protection installed in your house, please contact us at Bryant Electric Service and one of our dispatchers will be happy to help you.

We’re now at the point in the year where you can spend a relaxing summer evening on your porch looking up at the stars and in that case, you need to consider upgrades in outdoor and security lighting in Fairfax, VA in order to keep your family safe. Though there will be plenty of opportunities for relaxation this summer, it may be difficult to stay comfortable knowing you don’t have security lighting that will keep any intruders away. In addition, the property value of your home may suffer due to a lack of quality safety features.

If you want outdoor & security lighting and not sure exactly what you need, we can certainly recommend you consider:

Although LED T8s have not been around long enough to produce a thick memoir, there are some interesting things to note about why they exist.  A few years ago, there was concern that the rare earth metals used in fluorescent tube lamps might start getting significantly more expensive for the U.S. to purchase from China. Light bulb manufacturers began an arms race to develop an affordable and effective LED T8 replacement tube.

A sustained sharp increase in the price of phosphors never really happened. And so LED T8s have gained momentum in their evolution, organically evolving to better perform well in certain applications. Their price point has decreased, and their performance has gone up. And now, LED T8 linear lamps are certified by the DesignLights Consortium to be high quality, high efficiency lighting products.

However, LED T8s continue to be very controversial – even divisive – in the lighting world. Many people think they’re great; but some people think their existence is entirely unnecessary. Both sides of this argument tend to contextualize their visions of the merits and pitfalls of the LED T8 in a comparison with the merits and pitfalls of the traditional fluorescent T8 tube light.

LED T8 Linear Light Bulbs vs. Fluorescent T8 Linear Light Bulbs

First of all, the merits of fluorescent T8s cannot be overstated. Fluorescent tube lamp technology has been developed over decades and is now basically mastered. Fluorescent T8s are extremely inexpensive and have ridiculously long rated lives. In fact, in some cases, fluorescent T8s can last as long as LED T8s!

And it doesn’t stop there. The production of light with fluorescent tube lamp technology works really, really well. It is probably at its peak in terms of performance and cost. Fluorescent T8 light bulbs can last 50,000 hours. And despite their not-always-positive reputation for rendering color, fluorescent T8s can achieve high color rendering indexes (CRIs). But, it must be clearly noted, fluorescent T8s get more expensive as you seek a higher CRI.

And in terms of cost, let’s just say it straight: In many applications, the LED T8 tube light’s initial cost doesn’t make sense when compared to the relatively low cost of fluorescent T8s.  For example, at this stage of the game (June 2014), lighting large spaces like classrooms or large offices is job better performed by fluorescent T8s than LED. First, there’s the cost. Fluorescent tube lamps last long, cost little, and give off crisp light. Furthermore, fluorescent tubes give off light omnidirectionally, casting light upwards toward the ceiling as well as downward. This makes a space look more fully lighted. LEDs, in contrast, are generally more unidirectional and cast light downward only. This is something that will change, but, currently, this is just affirmation of the fact that fluorescent T8s reign supreme for some applications.

Fluorescent T8s often take a while to come on; they’re adversely affected by temperature (and somewhat sensitive about it); they can flicker often; and if the lights are turned on and off frequently, as in laundry room or bathroom applications, for example, they can fail quite prematurely, to the dismay and annoyance of everyone involved. And then there’s that toxic mercury vapor which poses danger to humans and the soil on which we live.

Oh yeah, fluorescent tube lamps require a ballast, too: A component that will also, eventually, fail.

Now, let’s give some attention to LED T8 tube lamps. It should first be noted that LED T8s have a higher initial cost than fluorescent T8s, which can be purchased for only a few dollars in some cases.

Despite their higher cost, LED tube lights have some nice advantages. First of all, LEDs love the cold, so they are great in cold weather applications, unlike fluorescent T8s, which become seemingly infirm in the cold, slow to turn on and flickerish. Basements, sheds, garages, porticos, covered pathways, bathrooms, etc, are great places to utilize the LED T8 linear lamp.

You also have to consider that if an LED T8 tube breaks, it will not release harmful mercury vapor into the air. Mercury from fluorescent tubes can get into the air but also the water supply, which is why you have to recycle them. For some people, the whole mercury thing is enough to open their minds to alternatives to the long-reigning fluorescent T8.

Plus, you can get better color rendering with LEDs than with fluorescent lights. Fluorescent lights work by transforming ultraviolet radiation into visible light. If you have a vague idea about what UV light is, you know that it’s the part of the light spectrum that’s just past the blue and violet area. Even with a rudimentary understanding of light, then, it’s easy to see how the result of transforming UV light into visible light would leave you with a bluish result. As a result, in general, fluorescent lights do not render reds well.

LEDs exude very little to no UV or infrared radiation, both of which fade the color of displayed objects including wall art, furniture, and even rugs. Fluorescent tubes – did you know this? – do indeed fade sensitive belongings over time.

Finally, LED tubes do not generally require a separate power supply. They run on line voltage and require no separate drivers, ballasts, or transformers. That’s one less thing that can break. In conclusion, LED T8s are more expensive than fluorescent T8s, but LEDs are safer, render color better, require no ballasts, operate better in the cold, and do not decline significantly in lifespan due to frequently switching on and off. This means that there are some applications, like cold places, bathrooms, basements, laundry rooms, kitchens, closets, storage rooms, walk in refrigerators or freezers, or places where there’s a risk of broken light bulbs like gyms, warehouses, etc, for which LED T8s might be the better choice. And since LED T8s don’t weaken with frequent switching on and off, they are great for use with occupancy sensors.

Whether your home is old or new, there are probably some things you would like to change about it. While the layout and existing construction is often the first thing you think of, wouldn’t it be nice to make your work for you a bit more? If you have been dealing with a breaker that trips frequently or have to turn off everything in order to use a certain tool or appliance that is a bit of an energy hog, you could probably benefit from an electric panel upgrade. An electrician in Pasadena, like those at The Electric Connection, can help bring your home up to your electrical standards.

If your home is older (more than 50 years) it wouldn’t hurt to have an electrical inspection. During the inspection, the condition of your wiring will be evaluated to determine if your electrical problems may be due to faulty or deteriorating wires. You have to imagine 50 years ago, the average home had a handful of items that needed electricity. Today, almost every outlet in the house is in use with various computer cords, cell phone chargers and a long list of gadgets that make our lives easier.

Because of this, your Pasadena electrical needs are a little different and an electric panel upgrade will support all the gadgets you need and want without having to share outlets or unplug everything so you can use one appliance. In some cases, the panel itself may be just fine and you will just need an additional breaker installed. All of this can be determined after the electrician does the inspection and talks with you about what your needs are. From there, you can make a decision about what will work best for you. When you are ready or if you would like to learn more about an electric panel upgrade, give The Electric Connection a call today.

We’re excited to announce that we now offer Printed LED Panel Lights for custom backlit signs, trade show and exhibition displays, product advertisements and branding, mobile displays, logos, and so much more! Our user-friendly panel building tool lets you configure a panel in four easy steps. Simply choose your ideal panel size, upload or select an image, edit your image, and choose a frame. You’ll be able to see your panel as a finished product with all chosen options. Compatible accessories will be listed before you reach the checkout page.

There are many aspects of our Printed LED Panel Lights that make them unique. Check out the information below to see why they’re so special.

We offer three types of panels: wall-mount, stand-alone, and 12-volt. These LED panel lights are available in a variety of sizes and are designed specifically for their intended applications.

Stand-alone panels come with a plug and a wire enclosure box. They can be used almost anywhere for any purpose from backlit signs for product showcasing and branding to window signage and custom logo displays on desks and shelves. These panels are available in 2′ x 2′, 2′ x 4′, and 1′ x 4′ sizes.