Electric wires and cables are the lifeline of most if not all industrial applications. If your cables fail, your entire system comes to a halt leaving you with costly downtime and loss of profit.

As a busy manager or department head in any industrial plant, you always have a lot to worry about every day. Implementing and following some basic guidelines will extend the lifespan of your cables, reduce downtime, decrease safety and non-conformance issues and increase the overall efficiency of the plant.

Here are some common practices for proper wire and cable care:

1. Choose an Effective Approach

Study the various electrical wires and cables in their respective departments.

Hudson Valley designs and manufactures distinctive lighting with a full range of finishes and glass options to satisfy even the most discriminating customer. Hudson Valley lighting products are impeccably designed, featuring outstanding quality and value. Designs of distinction and manufacturing of the highest quality are synonymous with Hudson Valley lighting.

Found in interiors of many of the most exclusive residential and commercial environments, Hudson Valley lighting products are meticulous in design and manufactured to exacting standards. Lighting styles range from traditional and vintage reproductions to high-end contemporary designs.

 The list of issues concerning the supply of electricity in Texas is long.  First, the state has its own power grid, so it is essentially isolated from the rest of the nation.  It can’t get power from the outside during peak demand periods.  Plus, new rules from the EPA went into effect January 1 to reduce greenhouse gas emissions, forcing the immediate shutdown of two power plants in the state.   On top of that, since all power plants need a supply of cooling water to operate, the state’s drought and low water tables may force up to 3000 megawatts of power-generating equipment to shut down as early as May.  According to Plano, TX electricians, one plant was forced to shut down in 2011 for lack of water.  Add to this an increasing population and projected record summer temperatures, and the likelihood of blackouts will be at an all-time high.

Fortunately, for customers of Texas power utilities, it is possible to avoid the headaches and potential damage to electrically-operated appliances in a blackout with some foresight and wise investing.  By using a savvy electrician, Plano TX residents can take advantage of the latest technology in back-up power systems to service their houses during power outages.  Homeowners can continue to enjoy all the creature comforts they expect, even if their neighbors are in total darkness.

The latest advancement in backup power supplies is the Indoor Generator, which uses a bank of batteries to provide emergency power to the home.  Unlike traditional engine-driven units, these indoor generators are quiet, require no messy fuel handling, have no smell, and produce a more efficient supply of power for home appliances.  Even better, customers don’t have to use power from the power company to charge the batteries.  Renewable energy sources, like solar and wind power, can be used to charge the batteries by installing solar panels or a wind turbine along with the unit.

A reliable, reputable Plano, TX electrician can set up customers with a system like this quickly thanks to innovations such as the Power Cart, a mobile trailer which combines a battery-based indoor generator with four solar panels and an optional wind turbine.  The indoor generator takes advantage of the sun and wind when available to power the batteries, relying only on the power company or second backup generator if the batteries deplete.  The system can provide a continuous 3.6 kilowatt output, and has on-board electronics to tell the Power Cart to sell power back to the power company using wind or solar power when possible.

Although LED T8s have not been around long enough to produce a thick memoir, there are some interesting things to note about why they exist.  A few years ago, there was concern that the rare earth metals used in fluorescent tube lamps might start getting significantly more expensive for the U.S. to purchase from China. Light bulb manufacturers began an arms race to develop an affordable and effective LED T8 replacement tube.

A sustained sharp increase in the price of phosphors never really happened. And so LED T8s have gained momentum in their evolution, organically evolving to better perform well in certain applications. Their price point has decreased, and their performance has gone up. And now, LED T8 linear lamps are certified by the DesignLights Consortium to be high quality, high efficiency lighting products.

However, LED T8s continue to be very controversial – even divisive – in the lighting world. Many people think they’re great; but some people think their existence is entirely unnecessary. Both sides of this argument tend to contextualize their visions of the merits and pitfalls of the LED T8 in a comparison with the merits and pitfalls of the traditional fluorescent T8 tube light.

LED T8 Linear Light Bulbs vs. Fluorescent T8 Linear Light Bulbs

First of all, the merits of fluorescent T8s cannot be overstated. Fluorescent tube lamp technology has been developed over decades and is now basically mastered. Fluorescent T8s are extremely inexpensive and have ridiculously long rated lives. In fact, in some cases, fluorescent T8s can last as long as LED T8s!

And it doesn’t stop there. The production of light with fluorescent tube lamp technology works really, really well. It is probably at its peak in terms of performance and cost. Fluorescent T8 light bulbs can last 50,000 hours. And despite their not-always-positive reputation for rendering color, fluorescent T8s can achieve high color rendering indexes (CRIs). But, it must be clearly noted, fluorescent T8s get more expensive as you seek a higher CRI.

And in terms of cost, let’s just say it straight: In many applications, the LED T8 tube light’s initial cost doesn’t make sense when compared to the relatively low cost of fluorescent T8s.  For example, at this stage of the game (June 2014), lighting large spaces like classrooms or large offices is job better performed by fluorescent T8s than LED. First, there’s the cost. Fluorescent tube lamps last long, cost little, and give off crisp light. Furthermore, fluorescent tubes give off light omnidirectionally, casting light upwards toward the ceiling as well as downward. This makes a space look more fully lighted. LEDs, in contrast, are generally more unidirectional and cast light downward only. This is something that will change, but, currently, this is just affirmation of the fact that fluorescent T8s reign supreme for some applications.

Fluorescent T8s often take a while to come on; they’re adversely affected by temperature (and somewhat sensitive about it); they can flicker often; and if the lights are turned on and off frequently, as in laundry room or bathroom applications, for example, they can fail quite prematurely, to the dismay and annoyance of everyone involved. And then there’s that toxic mercury vapor which poses danger to humans and the soil on which we live.

Oh yeah, fluorescent tube lamps require a ballast, too: A component that will also, eventually, fail.

Now, let’s give some attention to LED T8 tube lamps. It should first be noted that LED T8s have a higher initial cost than fluorescent T8s, which can be purchased for only a few dollars in some cases.

Despite their higher cost, LED tube lights have some nice advantages. First of all, LEDs love the cold, so they are great in cold weather applications, unlike fluorescent T8s, which become seemingly infirm in the cold, slow to turn on and flickerish. Basements, sheds, garages, porticos, covered pathways, bathrooms, etc, are great places to utilize the LED T8 linear lamp.

You also have to consider that if an LED T8 tube breaks, it will not release harmful mercury vapor into the air. Mercury from fluorescent tubes can get into the air but also the water supply, which is why you have to recycle them. For some people, the whole mercury thing is enough to open their minds to alternatives to the long-reigning fluorescent T8.

Plus, you can get better color rendering with LEDs than with fluorescent lights. Fluorescent lights work by transforming ultraviolet radiation into visible light. If you have a vague idea about what UV light is, you know that it’s the part of the light spectrum that’s just past the blue and violet area. Even with a rudimentary understanding of light, then, it’s easy to see how the result of transforming UV light into visible light would leave you with a bluish result. As a result, in general, fluorescent lights do not render reds well.

LEDs exude very little to no UV or infrared radiation, both of which fade the color of displayed objects including wall art, furniture, and even rugs. Fluorescent tubes – did you know this? – do indeed fade sensitive belongings over time.

Finally, LED tubes do not generally require a separate power supply. They run on line voltage and require no separate drivers, ballasts, or transformers. That’s one less thing that can break. In conclusion, LED T8s are more expensive than fluorescent T8s, but LEDs are safer, render color better, require no ballasts, operate better in the cold, and do not decline significantly in lifespan due to frequently switching on and off. This means that there are some applications, like cold places, bathrooms, basements, laundry rooms, kitchens, closets, storage rooms, walk in refrigerators or freezers, or places where there’s a risk of broken light bulbs like gyms, warehouses, etc, for which LED T8s might be the better choice. And since LED T8s don’t weaken with frequent switching on and off, they are great for use with occupancy sensors.