When you walk into a room in the house, you flip a switch and the light comes on. It is a standard, expected feature. It is actually a little boring when you think about it. Your light looks just like the lights in every other room in every other house. Maybe you enjoy being a little different or appreciate making a statement. Dramatic lighting schemes are one way to make your house just a little different from the rest. A Los Angeles electrician, like those at The Electric Connection can help you achieve your goals of having a lighting scheme that enhances the room and will get guests talking.

There are so many options. If you have gorgeous artwork that you want to be the focal point when the lights are turned on or a particular corner that is meant to draw the eye, you need the right lighting. You don’t have to stick with the standard white light. You can have fun with it and add a splash of color or put the boring white light in a flashy fixture. An electrician in Los Angeles can pretty much install any fixture that catches your eye. Your biggest job will be doing the shopping and finding the right chandelier, wall light or recessed light.

The rest is up to your electrician. Los Angeles residents will appreciate how quickly a single change in the lighting scheme can change the look and feel of a room. Whether you want to go bold and bright or soft and subtle, it can be done. In fact, the light fixture changes can happen in just a few hours, assuming the wiring for the fixtures is already available. If it isn’t, no problem. New wiring can be added along with a new switch. Make the call today to The Electric Connection and transform your boring lighting into something fun and exciting.

A significant number of homes in Baltimore and Bethesda, MD, Alexandria, VA, and Washington, DC built between the mid-1960s and the first half of the 1970s have hazardous aluminum wiring rather than copper. During that time, aluminum wiring was considered safe to use and viewed as a cost-saving measure. The U.S. Consumer Product Safety Commission (CPSC) now believes aluminum wiring poses a safety hazard in homes that still have this type of wiring.

The biggest danger associated with aluminum wiring is that unanticipated fire hazards arise from the oxidation and deterioration caused at the points where aluminum wiring is connected at outlets, light fixtures, and splices. While this can cause overheating and arching that won’t trip a circuit breaker, it can cause a fire. Aluminum wiring was used in an estimated 2 million homes between 1965 and 1973—and many of these homes are located in the MD, VA, and DC area.

If you’re concerned about dangerous aluminum wiring, pay attention to the following warning signs:

All of these signs indicate a potential fire hazard for standard aluminum wiring.

Aluminum wiring should be thoroughly evaluated by a qualified electrician who is experienced in inspecting and correcting wiring problems. The CPSC recommends a few methods for correction. The first is to rewire the home with copper wire, an expensive option that really only makes sense if the homeowner is already in the process of completely remodeling or doing deep renovations. The second option is to use the Copalum crimp method to correct the problem. This involves attaching a piece of copper wire to the existing aluminum wire with a specially designed metal sleeve and powered crimping tool. It is a permanent repair option that will eliminate the dangers posed by aluminum wiring. A third option is to use a UL listed copper to aluminum connector to attach a copper wire to the existing aluminum wire.

Only an experienced electrician can accurately determine the level of danger a home with aluminum wiring faces, and then fix the problem in an efficient, timely manner.

If your home has aluminum wiring, we recommend that you call Kolb Electric or contact us online. We will send one of our expert electricians out to evaluate the aluminum wiring in your home to determine the best option to make your home as safe as possible. We’ve been serving Baltimore and Bethesda, MD as well as Alexandria, VA and Washington, DC since 1925. You can count on our experienced electricians to get the job done right the first time.

Are you living in a home that was built before 1950? If so, you may have a potential fire hazard on your hands that you cannot see. Wiring in older homes is often an antiquated system know as insulated cloth wiring. While it may be perfectly safe in some houses, it can lead to problems down the road. If you are not sure if you have cloth wiring, you will want to call an electrician. Los Angeles homeowners can rely on The Electric Connection to provide prompt service.

An electrical safety inspection will determine whether your home has cloth wiring and whether or not it should be replaced. If you are noticing problems with the power in your home, like lights flickering, outlets not working and etc…it may be an indication the protective cloth around the wires is fraying. Overtime, the cloth becomes brittle and decays. This ends up leaving bare wires that can certainly become a major risk.

Your electrician in Los Angeles will be able to advise you the best course of action to take. If you are planning to do any remodeling or upgrading light fixtures, it is highly recommended you replace the old wiring in your home. During the inspection, the electrician can also check for the old knob-and-tube wiring. This is more common in homes built before 1935. This type of wiring involved the use of ceramic tubes and knobs. It is not safe and is not allowed in new construction anymore.

If you suspect your older home may have either one of these types of wiring, it is certainly better to be safe than sorry. Home fires started by faulty wiring are a preventable tragedy. The professionals at The Electric Connection are ready to help you make this big decision. Give us a call today to schedule your inspection.

A lot of time we are asked what is the equivalent LED product to convert from Metal Halide, High Pressure Sodium or Mercury Vapor. And a lot of time, we have a product in mind that works based on past experience. But how did we come up with that product, and how did we make the original decision on what was the proper replacement?

There’s a lot of science that goes into light, color, quality, and each light had it’s own characteristics. For example, it takes less LED to replace High Pressure Sodium than it takes to replace Metal Halide. And we are talking a lot more than just lumens. We are talking about color temperature, quality of light and something called photopic / scotopic lumens.

In the world of lighting, we measure foot candles with a light meter, this is called a photopic measurement. The light meter picks up everything, including spectrum’s that are invisible to us. Now, we humans see things to, and this is called scotopic lumens. Our rods and cones read and interpret light. And it does so differently than what a light meter does. So it is not uncommon when we demo a LED Light against a HPS light or Metal Halide, we first ask “Which is brighter” before we show the light meter reading. It leaves a few people scratching their heads. Well, that’s the science of of it all, and fortunately there is some handy tables called SP ratios that allow us to take the lumens of a particular light (photopic lumens) and multiply it by the S/P ratio to get the scotopic lumens equivalent.

For example, the S/P ratio for High Pressure Sodium is 0.40. The S/P ratio for LED at 5000K is 1.8. So if you take 40,000 lumens of HPS and multiply it 0.4, the effective scotopic lumens is 16,000. To get the same amount of lumens from LED, take the 16,000 and divide it by the S/P ratio and you get 8888 lumens. So the 8888 lumens of LED is the photopic measurement, the 16,000 LED lumens is the scotopic lumens measurement. So in an nutshell, you need 8,888 lumens of LED to replace 40,000 lumens of HPS from a scotopic point of view.

Here is a handy chart of common lights and ratios for you to use.