For anyone who is in control, manages, or even owns a facility that has a parking lot for either employees, customers and clients, or both; you know that security and protection of everyone is paramount.

With outdated, inefficient, and low quality output per watt, which is all that matters when it comes to getting the most efficient lighting. The reasons behind this is because let’s say you have two different LEDs products, one outputs 135 lumens per watt while the other is at 120 lumens / watt. To power a light that outputs at 18,000 lumens; the 120 lumen per watt fixture will take 150 watts to reach 18,000 total lumens. While the 135 lumen per watt fixture will only require approximately 133 watts to generate same exact amount of light that the other higher watt fixture products.

See the important of lumens per watt? It’s everything, and we believe

Here’s another project of ours where we retrofitted an existing fixture in a parking lot (before and after):

The image list could go on, but the gist is this: LED has and will always improve your facility’s lot. Just look at the images yourself for the proof!

By choosing LED parking lot products for your facility, you are choosing higher quality along with higher efficiency products. LEDs (more specifically MyLEDLightingGuide’s) offer a better Color Rendering Index rating talked about before is about lumen depreciation. Metal halide and HPS experience greater and quicker depreciation in lumen output than any LED product does. So while a brand new and freshly installed metal halide fixture may look the same as an LED to start off its life; give it a few years and watch the difference. LED is almost guaranteed to be brighter for longer.

On the topic of saving money, how about the final benefit that will make you fall in love with LED technology and what it can do for your business.

While you need to be careful which LED products you purchase and from where you buy them from; commercial LEDs are just as open to rebates as any other.

Something called DesignLights Consortium (DLC for short) qualifies products and lists them on their site if they pass vigorous tests set by them. They offer two types of listing: commercial rebates but they also prove to be lesser of quality. Think; if a company offers quality lights what’s their reason not to get qualified? There isn’t, and that’s exactly our point.

Thankfully there are many DLC qualified products out their on the market, including ours. You can always take a look around just to say hi!

Motion-activated lighting can be a big boon for homeowners in Tampa. The added security, safety, and utility are all great, and these simple and effective solutions have been helpfully serving our clients all across Florida for years. But, they can be a bit of a pain sometimes.

Is your motion-activated light refusing to kick on, or are you tired of wrestling with a light that seems to only work when it feels like it? If so, don’t worry! The certified electricians at Hoffman Electrical are here to help, bringing you some fast and easy solutions to get your motion lights back in gear and behaving properly!

The Importance of Residential Circuit Breakers Circuit breakers have an important job in the day to day functioning of your home’s electrical system. These breakers are attached or connected to an electrical circuit. They are designed to prevent any further power flow continuing through the circuit in case there is an arc, short or a power surge. Circuit breakers can fail or go bad, and in such cases, they require immediate attention. Because if a circuit breaker is no longer functioning, it cannot provide your appliances and electrical system the protection they need.

Where are Circuit Breakers? Circuit breakers are located in the circuit breaker box. Some homes have a single main breaker box while other homes may have one main breaker box plus several small breaker boxes. It is important to know where your home’s circuit breakers are located so you can check them in the event of an emergency, or if a breaker gets tripped and needs to be reset.

Finding a Bad Breaker If a circuit breaker gets tripped, you need to reset it. A tripped breaker appears to be halfway between the on and off position. A circuit breaker may not need to be replaced, it may just need to be reset. Turn off all the lights and electrical appliances operating on that particular circuit. Flip the breaker back to the “on” position.

Some circuit breakers have to be turned completely off before they are turned back on. Test the circuit breaker after it has been reset by turning the breaker back on and then adding all of the devices or appliances back one at a time. If every item operates again, a voltage tester is not necessary.

I grew up in the 90’s, back when thrift store shopping was considered alternative and grunge.  While I tooled around Goodwill listening to Nine Inch Nails on my Walkman, my more sophisticated friends were at the mall, looking adorable & stylish in the latest trend from The Limited.

But that was the 90’s.

Thrift-store shopping, dumpster-diving, and hand-me downs deliver a new parlance that has clever DIY’ers quaking with excitement for Saturday yard sales and obsessively scouring Craigslist for the Next Big Find.  This elegant new term for taking used items and making them new = REPURPOSING.

Also commonly referred to as recycling, upcycling, reinventing, revitalizing and/or reusing, entire boards are dedicated to this subject on Pinterest. Everything – and I mean everything – can be repurposed.  So why not the light bulb?

With a few basic tools and a steady hand, a light bulb can be hollowed out and transformed into a unique gift or decorative project.  Prepping the bulb, however, is not a task that we recommend for the kids.  Before you undertake any of these projects, take a moment to read a tutorial on how to safely hollow out a light bulb.

1. Witches Brew