It is estimated that thousands of electric shock accidents take place each year, of which some are fatal ones. Aside from this, there are incidents of electrical fires caused by poorly-installed or ill-maintained wiring. It’s important to understand that most of these fires and accidents are avoidable. There are some simple things you can do to prevent an electrical fire from erupting on your property, including:

Never try to force plugs into the outlets and don’t remove the third prong which is the grounding pin, to fit it a plug into an outlet with 2 prongs. Do not plug in too many appliances into a multi-plug outlet.

Check whether there are any loose-fitting plugs as these can be a fire/shock hazard. If you notice that any of the wall plates are broken/missing, replace them without delay. So that the components and wiring aren’t exposed. If you have very young kids in your home, make sure that you cover all used outlets.

Check the cords for fraying or cracks. Pay special attention to ones that are placed in any high traffic areas or under rugs and carpets.

Make sure that the wattage of the bulbs is compatible with the fixture requirements. If you find any bulbs with a higher-than-recommended wattage rating, replace them immediately. It’s also important to ensure they don’t overheat and that they are screwed-in securely.

These should never be used on a permanent basis. Use ones that have safety enclosures to protect kids from burn injuries and shock.

There should be GFCIs installed in the kitchen, bathrooms, garage, basement and various other indoor and outdoor outlets in your home. Test these on a monthly basis to ensure they are working as required.

Only older properties have fuse boxes and these don’t have the capacity to withstand the heavy electrical loads required by modern-day equipment and appliances. It’s far better to get these older systems evaluated by a skilled electrician and replace them with modern circuit breakers.

Faulty or old wiring is one of the commonest causes of residential electrical fires in Australia. Get these checked periodically for loose connections, loose wall fixtures or wall receptacles. If you hear any hissing, sizzling or popping sounds behind walls or from sockets, call in your local electrician without delay to get these installations inspected and replaced. If you find that any switches or electrical fixtures are hot to the touch, get those checked as well. Flickering light bulbs are another indication of problems in the electrical wiring as well and it’s best to get a thorough check conducted.

If you find that a specific circuit breaker trips repeatedly, or you experience shock when you touch it, you should unplug it immediately and get it replaced or repaired. Check for damage or cracks in the connectors and wiring and install surge protectors to protect all your expensive electronics.

When you upgrade your home, make additions or add extensions like extra rooms or an extra storey etc., or even add a large number of new equipment or electrical appliances to your home, that can overburden the existing electrical installations. At this point you would have to increase the service capacity of your home’s electrical system.

We are a company that has been operating in this space for a number of years and have the skill, knowledge as well as the resources to install, maintain and upgrade all types of electrical installations on your residential or commercial premises. For more information, contact the Allround Electrical team at this number – 1300 169 263. Alternatively, you can write to us at our email address.

Thanks for reading,1300 169 263

Beauty Box Spa was one such project - we loved working with the owners to create a luxurious locale for their services. This business provides hair styling, nail application, and esthetics services, all with a fun, “outside the box” approach. The owners pride themselves on using up-cycled and recycled materials to decorate the space.

When we started working with Beauty Box, the setting was raw, a mere shell of what was to come. Besides starting 100% from scratch, we were working with the strict energy code of the City of Vancouver, which limits the amount of lighting that can be installed in a single space.

To meet this challenge and provide an energy-efficient boost for the client, we utilized LED lighting. LEDs provide exceptional service over traditional lighting for the following reasons: