The electrical field is one that has seen a number of remarkable discoveries over the decades. One very important lesson has been the aspect of grounding of electrical currents. It’s true that we need electricity for almost everything in our daily lives and can’t even imagine a world without it. However, it continues to be one of the most dangerous elements on earth. If you haven’t already properly grounded your home’s electrical systems, you are taking a significant risk by not doing so.

Every electrical circuit has an active wire which supplies power; there is also a neutral wire which is responsible for carrying the power back. There is a third wire (grounding wire) that can be attached to the power outlets & the electrical appliances and devices; this wire is connected securely to the ground in your breaker box.

This third wire is the additional path that the electrical current can pass through to be safely returned to the ground, in case there is a short circuit; this prevents any harm being caused to anyone. In the event that a short circuit occurs, the current flows through into this grounding wire and it’s when you notice a tripped circuit breaker or a blown fuse in the electrical main board on your property. If this wire hadn’t been grounded, it would have resulted in a fatal shock.

This is one of the most important reasons to ground electrical currents. It’s the best way to protect your family members from electrical surges when they are operating any electrical appliances in the house. In case a lightning strike causes an electrical surge on your property it can result in extremely high electrical voltages in your system. When the wiring has the proper grounding, all the excess electricity gets diverted into the earth, rather than burning everything that’s connected to your electrical system.

When your installation is grounded, it becomes very easy for the power to get directed exactly to where you need it; this allows the electrical currents to efficiently & safely travel across your home’s electrical system.

A properly grounded system makes it much easier for the power to be distributed in the right amount to the right places. This plays a significant role in ensuring that there is no overload in the circuits. The earth becomes the common reference point for all the different sources of voltage in an electrical system.

One of the primary reasons why grounding is extremely effective in keeping you safe is because the earth is an excellent conductor, and electricity always takes the path that has the least resistance. When you ground your electrical system, you are giving it a path that it can easily take, rather than into you; this can potentially save your life.

If your home’s electrical system isn’t properly grounded, you are just risking the appliances and equipment that are connected to your system, being burnt beyond repair. If the situation gets out of control that can also result in a fire risking your property and causing physical injury, sometimes even death.

Electrical systems need to be maintained over the years to retain their functionality and safety. Because of that, it’s a good idea to have a Pasadena electrician take a peek at it every now and then. A poorly maintained electrical system is much more than a hassle to use. It can be a real hazard. Time takes its toll on everything, including electrical systems. As wires and connections age, there can be cracking, breaking, and assorted other little damages that interfere with function and safety. Extreme temperature changes or household pests moving around inside of the walls can contribute to damage as well.

Because so much of the action of an electrical system happens behind the scenes, in those out of sight and out of mind places — behind the walls, in the attic, in the basement — potentially hazardous damage often isn’t seen. The first clue that there is a problem is typically when something doesn’t work right. Sometime a person will make a repair, such as install new electrical outlets, but that may not really be the main issue. Why the outlets went bad is the real issue, something that an electrician Pasadena CA professional would probably recommend tracking down and repairing.

There’s a reason for that. Shorts in your electrical system can cause a lot of problems. Sensitive, expensive electronics can be damaged. Broken, sparking wires can cause house fires, as can overloaded circuits that allow wires to get too hot. Sometimes a broken outlet is just a broken outlet. Other times, however, it isn’t. A professional electrician in Pasadena, such as those at the Electric Connection, has the experience to know, and a deeper understanding of the overall system. The Electric Connection has been handling electrical maintenance and repair projects of all types throughout the region for 30 years.

If you’ve let your electrical system get a bit run down, and it’s time to consider electrical upgrades or perhaps even a whole house rewiring, the Electrical Connection can help. They offer a lifetime guarantee on all of their work, and they also offer a free home safety assessment with every job they do. During that assessment, they check your main electric panel, grounding, GFI protection, as well as surge protection, and smoke detectors, if they are wired into the main electrical system. Having smoke detectors installed like that is a good thing, as there are no batteries to worry about.

If having a large project, such as whole house rewiring, is more than your budget can bear, then it may be a good idea to have your electrical rewiring done a section at a time, as you can afford it. Be sure to keep an eye on the Electrical Connection web site, as they offer specials and discount coupons periodically. They also offer free over the phone estimates, based on what you tell them about the symptoms you are experiencing or the project you are considering. This Pasadena electrician company also offers free over the phone help and varieties of tips on their web site to help you better care for and understand your electrical system.

Excellent customer service is as important to The Electric Connection as is the fine quality of work they’ve become known for through the decades. If you schedule an electrical service call with a Pasadena electrician from the Electrical Connection and the technician that is handling that service call arrives late, your service call is free. That, however, is rare. What usually happens when you make an appointment with an electrician in Pasadena CA from the Electric Connection, is that your technician arrives at the appointed time, in a well supplied service vehicle, ready to meet the work goals of the day.

Click here to visit our website.

One of the main stays in Industrial and Commercial Lighting has been the Metal Halide Bulb. It is common in Indoor Fixtures, such as High Bays, Canopy Lights, Garage Lights and Low Bays. It is

So you have a Metal Halide (or even High Pressure Sodium) light, and you want to convert to LED. You’ve done your research, you’ve been inundated with marketing materials that tell you what is the most important thing to consider (coincidentally it probably is something they think is important). And now you are left to make a decision. New or retrofit? What new versus retrofit. We sell both. Our retrofits perform as well if not better than new fixtures, but not all retrofit kits can make that claim. However, if your fixtures are old, leak, and have seen their better days, then by all means replace them. It does not make sense to buy a new fixture that includes a retrofit kit inside of it like some vendors will try and sell you. The engineering of some of the new fixtures are fantastic. However, the real reason you would want to consider retrofitting is because you have a significant investment in fixtures. Why not keep that investment? Retrofitting is extremely cost effective, especially our Look for the DLC Premium Symbol, it’s different than the DLC Standard symbol. And that gives you the quick notification that the light you are looking at is the most efficient.

And why does that matter. It’s simple. It will save you a lot more money. Let me do three comparisons for you. First a retrofit kit designed at 97 lumens per watt to replace a 400W Metal Halide bulb, a second at 102 lumens per watt and ours at 155 lumens per watt. Lets keep everything else the same. Cost of electricity, hours of use. The only thing different you will notice is the watts consumed and the lumens produced. For the record, our retrofit kit uses the least amount of energy in this test BUT also produces the most amount of light. We will use 12 hours a day operating time and .12 kw.h electricity cost

Calculation 1: 97 lumens per watt retrofit head, 135 watts, 13164 lumens

Savings per fixture per year over 400 watt Metal Halide: $170.82

Calculation 2: 102 lumens per watt retrofit head, 143 watts, 14600 lumens

Savings per fixture per year over 400 watt Metal Halide: $166.62

OK, so between the competitor options, you are neck and neck, the difference is so minimal you can make your decision based on whose website you like more

Calculation 3: 155 lumens per watt retrofit head, 100 watts, 15,776 lumens (this is our LED Retrofit Kit)

Savings per fixture per year over 400 watt Metal Halide: $189.22

So there is clearly a $18.40 savings over the first LED retrofit option and a $22.60 savings per fixture over the second LED Retrofit option. And, we produce more light!

We have 3 mini LED Retrofit Kits, 30W, 45W and 60W designed to replace up to 250W Metal Halide. We have 3 standard sized retrofit kits, 75W, 100W and 120W designed to replace from 250 Watt to 400 Watt Metal Halide. We have 2 Large Retrofit Kits, 150W and 200W, designed to provide more light than a 400W Metal Halide up to 750W Metal Halide. And we have 3 Extra Large retrofit kits, 280W, 320W and 350W, designed to replace 1000W Metal Halide.

 A properly sized and decoratively coordinated entryway foyer fixture provides an opulent and brilliant introduction with just the right lighting effects.

 Even if your home is not made of glass, fine lighting shines through more than any other home accessory or decorative feature.  An attractive foyer fixture creates a welcoming atmosphere, while emitting generous ambient light for greeting guests safely into your home.

It is important to size and install your foyer lantern properly to make the most of your lighting composition.

To determine how big your foyer lantern should be, you must know your ceiling height. The overall height of a foyer fixture should allow for a clearance of at least 7 feet from the floor.

In a two-story foyer, if there is a picture window above the front door, center the foyer lantern so it can be seen from outside. If the foyer is extra-large, wall sconces make a nice accompaniment to add depth and supply additional illumination.

The latest lighting trends feature oversized fixtures.  Make a grand statement with a large foyer lantern for superb upscale illumination.  Foyer lanterns from Savoy House Lighting are captivating and superbly crafted, featuring original style, timeless elegance, and designer authenticity.

With an elite team of designers, Savoy House continues to create sophisticated award-winning light fixtures. Artistic innovations include works by Karyl Pierce Paxton, Raymond Waites and Brian Thomas—artists who command attention and brilliantly define the next generation in home illumination and décor.

The design team at Savoy House has propelled home lighting and décor to new heights by creating and defining light fixture fashions and novel lighting compositions for over 46 years.

Check out the latest collections to revamp your home entryway and welcome the Summer Season.

Trends may come and go, but fine quality and classic finishes endure throughout the ages. Keep in fashion with the latest in home lighting and accessories.  Look to Savoy House when renovating or updating your home lighting design for light fixtures, lamps and decorative accessories that are steadfast, strong and enduringly beautiful.