LED lighting is truly an upgrade.  Home owners and businesses alike can keep more of there hard earned money by simply changing from incandescent bulbs to energy efficient LED bulbs.  While the upfront cost of the LED lamps is substantially higher, the long term cost savings from the energy efficient LED lamps is more than worth the upgrade.

If you don’t have the budget to replace all your old incandescent lamps try replacing just the most heavily used ones.  Or lamps in hard to reach areas such as eves or above stairs.  Kitchens tend to be one of the areas in a home that have the lights on the longest.  And with most kitchens having recessed can lighting in them, kitchens are one of the easiest locations to upgrade to LED lighting.  There is a lot of quality LED lamps available on the market today.  With major companies such as Sylvania and Feit offering dimmable long lasting LED lamps.

Choosing the right LED lamps can be a complicated task if you don’t know what your looking for.  With LED lamp packaging displaying words like, lumens, wattage, and color spectrum, choosing the right lamps is overwhelming for some.

Wattage is how most people judge the amount of light they want for the particular fixture.  However, lumens is the true measurement of the amount of visible light LED lamp will give off.  A typical 60 watt incandescent lamps will give off around 520 lumens and last on average 2800 hours.  While a quality LED 12 watt lamp can give off around 800 lumens and last around 25,000 hours.  Some LED lamp manufactures have put on there packaging what wattage of incandescent lamp there LED lamp is designed to replace.  This helps to take some of the confusion out of choosing the right bulb.

The right color spectrum can make a huge difference in the way a room looks.  Color spectrum or as some people call it lamp temperature, is the color of the light the lamp gives off.  When LED lamps were first released they gave off a very cool or bluish color versus the more yellow or warm color of traditional incandescent lamps.  Now days LED lamp manufactures have a more perfected color that the lamps give off.  Often you will not be able to tell a difference between the color of an incandescent lamp and a quality warm white LED lamp.

You must also choose if you want to be able to dim your new LED lamp.  Dimmable LED lamps often cost more than non dimmable lamps, some as much as 40% more.  Dimmable led lamps give you the ability to choose how much lumens the lamp gives off via your wall mounted dimmer switch.  Dimming your LED lamps helps to reduce energy usage which saves you money on your power bill.  Using an approved dimmer for the LED lamp is a critical factor.  LED lamp manufactures and a list of approved dimmers for there product that can often be found in the directions or the manufactures website.

By now we all should know that switching from incandescent lamps to LED lamps can be a substantial savings.  But how much can you really save?  If you figured an average of 25 LED lamps per household and factored in average usage over 50,000 hours you would save around $6,700.00 in energy cost per home.  Add in the cost of time and maintenance to change the old incandescent lamps and the saving grows even bigger from there.

With businesses typically having more lights and increased hour usage switching to LED makes perfect sense.  With many power companies such as Mid American Energy offering rebates to help offset the cost of upgrading the LED.  A recent LED upgrade project we completed is Hoodz of Central Iowa.  The LED lighting helps reduce energy consumption, heat, and

maintenance cost. While they choose an ultra modern high efficient LED fixture for this project, often changing the existing lighting from commercial fluorescents to LED linear lamps can be an option as well.

Mid American Energy is even upgrading street lighting with LED.  They are starting to replace more than 100,000 Des Moines area street lights with new LED street lighting.  The project is excepted to take 10 years and save 35 to 50 percent in energy and reproduce carbon monoxide emissions by as much as 22,000 tons per year.   More on the LED street lighting upgrade can be found on KCCI’s post here.

Installing LED lighting from the initial construction phase of a business is now becoming more and more common.  A recent project Custom Electrical Services completed in West Des Moines Iowa for R2 Financial Strategies 2nd floor build out used all LED lighting throughout there new space. 

/foot)

Strips with more LEDs per foot will consume more power.

In short, if maximum energy efficiency is what’s most important to you, choose a light strip with smaller LEDs and fewer LEDs.

In order to ensure your LED power supply doesn’t overheat and fail prematurely, we use this general rule of thumb:

Make sure the total wattage of your LED strip lighting is at least 20 percent less than the power supply’s rated wattage.

For example, if you have an LED strip light that requires 80 watts of power to run, you’ll need a power supply that’s rated for at least 96 watts.

The vast majority of our strips include wattage per foot right on their product pages.

power supplies range from six watts to 1,500 watts for compatibility with a wide variety of LED strip lights.

Let’s take a look at an example:

It’s important to verify that the voltage of the power supply you choose is compatible with the voltage of your LED strip lighting. Also, be sure that the power supply’s input voltage matches that of the location it will be installed in. If you have an LED strip with 12-volt DC operation that you wish to use in a 120-volt AC home wiring system, you’ll need a power supply that includes 120 volts in its input range and has 12-volt DC output.

Another factor to take into account for longer runs is voltage drop. A significant voltage drop is present after a certain distance of LED strip. After this distance, there will not be enough voltage present to light the next length of strip. This varies depending on the type of strip and length being used. Usually, a single-density strip (nine or less LEDs per foot) will need to run back to a power source every 32 13/16 feet (10 meters). A high-density strip (18 or more LEDs per foot) will need to run back to a power source every 16 3/8 feet (5 meters). Please refer to “Max Run” in the specifications table of the strip light to determine how many can be run continuously without a parallel run back to power.

3) the 4) if you want your strip to be dimmable

power supply calculator on the product pages of all of our LED strip lights!

There are a few steps involved:

Step 1: Select your strip and the length you need.

Step 3: Click the green “Power Supply Calculator” tab, and select your product by choosing it from the list OR by pasting the exact part number in the search bar.

Step 4: Enter the number of strips at the desired length you’ve selected and voila! You’ll see a list of all compatible power supplies with the best match at the top of the list!

When dealing with electronics, safety is paramount, and you want everything to work like it’s supposed to. So if you’re still not sure which power supply to use for your LED strip lighting project, just reach out to our technical support team or customer service department at 866-590-3533. Our teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

Everyone has had electrical problems with lamps and lighting fixtures. Your favorite lamp may be flickering off and on. You’ve changed the bulb and that doesn’t fix the problem. Now what do you do? The answer can be as simple as replacing worn out light fixture wiring or it may be more complex than that.

Incorrect use of electricity, inefficient appliances and lighting may lead to high energy bills. In addition, the faulty state of your home insulation will lead to heat or cold air escaping when it should not. Other factors include water leakages in the washroom and kitchen sinks, leaking hot water pipes, etc. Any of these will require more energy to heat or cool the air, or pump water to compensate for the lost amounts.

An electrician can assess your entire home and make a recommendation to enable you to save energy and you may even be able to enjoy energy rebates from making upgrades to your lighting system. Address any electrical problems at this time.

You may not have thought about the Advantages To Wind Energy lately, but every month when you get your electric bill in the mail, you may find yourself asking, “Isn’t there a better way?”, or “How can I have Plano Electrician, ElectricMan Inc. is now offering something that will definitely spark your interest!

The Advantages To Wind Energy can now be felt by homeowners and business owners through more efficient, highly cost effective, and easily installed wind power generators.  Standing only five feet tall, with the capability of harnessing even a slight breeze coming from any direction, these new wind generators are a drastic improvement on the standard “Propeller Style” wind power generators that most people are familiar with.  Now you don’t need an open field or even a very windy area in order to start declaring your independence from the high costs that electric companies place on the electricity that they provide to you.

Partnered with a system like the Indoor Generator, which allows you to program the system to use stored electricity when it is most efficient for you, you can do two major things.  First, at times when you are creating more energy than you need, that energy can be funneled into a battery system and stored for your higher usage time, avoiding those peak usage premiums that power companies have put in place to raise profits and revenue. Secondly, once your stored supply of electricity is at full capacity, you can actually sell your surplus electricity back to the power company, offering you the possibility of income without any labor on your part!

Everyone is looking for a way to save money these days, so here is one more incredible Advantage To Wind Energy.  If you install a renewable energy system for your home or business before the end of 2016, your entire system is eligible for a 30% federal tax credit!

To see this amazing product in action, visit www.electricmaninc.com!