An electrical circuit works as a loop where electricity flows from a source and then returns to that point again after powering the device connected to it. The power flow interrupts or stops if the path is broken. There are also receptacles, fixtures, or switches joined to the course through different types of electrical wiring.

Every electrical circuit has a specific breaker or fuse that controls it. Inside the main electrical panel of your house, you will find reference numbers to identify which breaker or fuse is assigned to which circuit. Mapping of them is a standard electrical safety procedure.

power company supplies electricity to your home through the transmission and distribution lines. The energy enters the service panel, also known as the fuse or breaker box, after passing through a meter. Then, the box has three wires (hot, neutral, and ground featuring insulation of different colors) that do the jobs of transmitting the power to an external outlet, returning to the source, and providing the ground.

The wires of your home are generally installed in three ways:

It’s a wiring system where a single electrical circuit supplies power for several devices. There are various housing boxes from where both hot and neutral wires emerge and run along the route. They branch off to single receptacle and fixture.

It’s the most common of all the systems seen in residential settings.

Switch Wiring

Installed on hot wires, such a system has switches that either transmit or break the current flow to various devices or lighting fixtures. A switch changes its position to allow or interrupt the flow of electricity to electrical machines and instruments.

The system routes the hot wire through various fixtures before joining to the neutral one, which then carries the power to the source. It’s the least used and most inconvenient of all the types because it connects the devices, i.e., lights in a series. So, the circuit breaks off when just one light is burnt out.

Parallel wiring is the best option for household settings because it does not break even when one of the connected fixtures goes kaput. Nevertheless, remember not to run too many electronics from one source because each circuit can carry only a maximum electrical flow.

Your home is constantly evolving. The people who live in it grow up. You may expand the family at some point or your family may shrink as the kids move on. With your ever-changing family, your home will need to grow and evolve with your needs. Remodeling your family home makes a lot more sense than pulling up stakes and buying a new home that will fit your needs for a short time. You can make your home fit your family by remodeling with the help of an electrician in Santa Monica. The team at The Electric Connection is here to help you realize your dreams.

A remodeling job is an exciting adventure as you work with a contractor to transform your home into one that you are proud of and completely comfortable in. Unless you are a skilled tradesman, you won’t want to try and take on this big job yourself. Your fun adventure will quickly turn into a nightmare that could not only put your safety at risk, but the safety of your home. It is imperative you leave all of the Santa Monica electrical work to a professional.

Prior to starting the remodeling process, you will want to have a conversation with your electrician and other contractors about what your goals are. Some points to discuss with your electrician are as follows;

• Replacement of existing light fixtures • Installing data lines

While the electrician is in the house, it doesn’t hurt to have an electric safety inspection completed as well. This will help you identify any areas that should be upgraded or replaced during the remodel. This will make your home safer and give you peace of mind. If you are ready to take the first step in remodeling your home, give The Electric Connection a c all today.

We all know that buying and selling a home can be one of the most stressful things we ever do. And if you’re selling your house, it’s extremely important to make sure your home is up to code. Some electrical code violations are illegal, others are dangerous—some are both! There is a major benefit to scheduling an electrical inspection prior to putting your home on the market: you have the ability to correct any electrical code violations ahead of time, which may help in avoiding delays in the negotiation and sale of your home.

Electrical code violations pose serious health and safety risks to anyone in the home. Don’t fall victim to the common wiring problems and mistakes that, left uncorrected, have the potential to cause short circuits, shocks and even fires. Avoid these violations that could cost you your home—and your life:

Planning on some home remodeling in Arlington in the near future? You might want to consult your friendly neighborhood electrician (that’s us!) about some points of critical importance. Why? Because remodeling, inevitably, will almost always include a measure of electrical work. And in Arlington, no one knows electrical work like the certified electricians at Kolb Electric!

In fact, we get quite a few queries on a regular basis about remodeling and how it may impact the electricity in your home. And today, we bring you the most common questions residents ask our Arlington electricians, and their answers.

We got loads of questions. But luckily for all of us,providing answers and solutions is what we do, and we love every minute of it! Some of our most asked include:

Need a certified electrician to assist with your remodel? Our team boasts all of the skill, experience, and technology needed to ensure your energy needs are totally met! If you’ve got more questions, our Arlington electricians will be happy to provide answers. Just contact us online!