1.  Size and install smartly:  Whether you are installing a crystal chandelier over your dining room table or as a central design feature in your master bedroom, the diameter and height of your fixture must be in proportion to other items in the room.  The diameter of a dining table fixture should be 12 inches less than the diameter of the dining table.  The height of the chandelier should allow for a clearance of 30 inches from table top to the bottom of the fixture.

Quoizel’s “Tricia” chandelier adds elegance to this contemporary dining room.  * Interior design by Sandra D’Amata International, Inc.

If your crystal chandelier will be a central focal point in your foyer, living room or master bedroom, take into account your ceiling height and choose a chandelier that may be installed to leave at least a 7-foot clearance from the floor to the bottom of the chandelier.

2.  Reflect Resplendence:  The true beauty in a crystal chandelier extends far past the light source, decorative finishing and crystal configuration.  Crystal facets reflect and refract a brilliant array of colors and illuminating effects, especially when combined with sunlight and/or electric light sources.  Matte finishes on furniture and surrounding walls work well with crystal illumination.  Avoid creating glare and unflattering shadows off metallic or shiny surfaces.

3.  Choose the Right Bulb: Most chandelier bulbs will be candelabra-based, yet what type of candelabra bulb you choose will make a tremendous difference in both the total presentation of your chandelier and the overall illumination in your room.

Crystorama’s “Mercer” chandelier–installed with dimmable LED candelabra bulbs–provides magnificent illumination in this master bathroom.*

Frosted bulbs provide a more subdued illumination. They are recommended for most traditional dining room chandeliers.  Clear bulbs work well with chrome finished retro-modern chandeliers and may add to the radiant sparkle of modern crystal chandeliers.

For a more traditional look, flame tip bulbs are the right choice.  Flame tip bulbs also look best in chandeliers with faux drip-candle holders.  Torpedo bulbs are less tapered and present a contemporary look.  Round bulbs add an eclectic vibe to a traditional chandelier.  Uniquely-shaped and/or textured candelabra bulbs may add a custom-designed artistry to your chandelier.

How do tripped circuit breakers happen in the first place? An overloaded circuit is the most common reason for a breaker tripping and usually happens when a circuit has more electrical load connected to it than it really should have. Let’s say you have a 15 Amp circuit breaker that is protecting a 15 Amp circuit. If 20 Amps of current start flowing through it because a toaster, TV, radio and space heater were all connected to the same circuit and were on at the same time, then what you’re left with are tripped circuit breakers aimed to prevent overheating of the circuit.

Allow Kolb Electric, one of the premier electricians in Alexandria, Arlington, Fairfax and all of Northern VA, to guide you through the process of resetting tripped circuit breakers, which is actually quite easy.

If your breaker continues to trip immediately after you’ve reset it, this is indicative of a direct short. Do not try to reset your breakers at this point. If these steps don’t help you resolve your tripped circuit breaker problem, it’s time for you to contact a quality electrician in Virginia who can uncover the source of the problem, which could be due to one of the following:

It has been six months since I started writing for the Light Reading blog, and boy has it gone by quickly. It’s hard to believe that I have written almost 50 posts! To mark this occasion, here are the six blog posts YOU liked best during my last six months of blogging.

1. via Strobel Design Build

In retrospect, I can see why this has been such a hit with the Light Reading readership. I mean, when it comes toMinions Web

This post was one of those visual, inspirational posts that I enjoy reading on other blogs. Instead of giving step by step instructions, this blog post shows you a bunch on interesting things that people have done with LED Matthew Danser Photography

This was my first blog post for Pegasus! In it, I interview Austin, TX photographer Matthew Danser to find out how he “paints” with light in his photos. We learn some interested photography tricks – tricks that I try out in the next most popular post.

5.

In this post I take some of Danser’s suggestions and experiment with “light painting” in my apartment at night. There’s lots of fun stuff here, and things get a little weird with my designs, but hey! It was an experiment! No stuffed animals were hurt during this photo shoot.

6.

John is a critical part of our residential service division.  John is a very experienced electrician, skilled in fishing in wires, and updating existing homes to bring them up to code or even install elaborate upgrades.  John is also a recent graduate of a service training program he attended last October in Palm Springs California were he brought back with him skills and various techniques to provide the best possible customer experience to our customers.  John takes pride in is work and takes his job serious.  He takes time to understand the customers needs and makes sure they fully understand the options they have available to them.  He is a dedicated team member always making sure our customer needs are meet first and is willing to help other team members with any issues they encounter.

John is a resident of Grimes Iowa and has two kids.  He is a former paramedic and also recently became engaged and has spring wedding plans in his future.  Congratulations John!  Thank You for being such a critical part of Custom Electrical Services!

Categories: Team Member Spotlight« Free Blue Lives Matter Bracelets To All…  |  Safe Commercial Electrical Work 24 Hours Per Day »