Electricity exists everywhere, from high voltage power lines to phones and computers. Understanding the basics of how it works remains essential to using it safely and efficiently.

When electricity travels from a positive lead to a negative lead in a circuit powered by a battery, it is considered direct current. This type of current powers electronics, LED lights, and cars. Alternating current is generated from rotation, usually by a generator. The direction of the current and the voltage flips as the generator completes a rotation. The faster the generator spins, the faster the flipping of current direction occurs. In North America, the typical frequency of AC power is 60hz or 60 alternations per second. The advantage of AC power is that the voltage can be stepped up easily by use of a transformer, which allows high voltage transmission. AC power is also useful for electric motors.

Specifically, power is a measure of energy usage over time. The standard unit of power is the watt and calculated as P (watts) = V (volts) x I (amps). Utility companies sell electricity in units of kW*h (kilowatt hours), which is simply one kilowatt of power delivered continuously over one hour.

Time to ditch the band posters! Show off a new painting or favorite framed photograph with a battery-operated picture light that installs easily and without messy cords.by Celebrate home ownership by decorating the front door or mailbox  with a customizable house number sign.

Repairs are an inevitable part of home ownership and there’s nothing quite as frustrating as not having the right tools. Cover all of their bases with a 130-piece tool set. Make small repairs and upgrades easy with a flexible work light that can clamp onto surfaces and direct light right where they need it.

If you are looking for a place to escape from life’s every day hustle and bustle,Look for IP (Ingress Protection) rated fixtures that are waterproof, meaning dust-tight and protected against long immersion in water, rather than simply “water safe” or “wet location safe” options.  Waterproof fixtures are meant to be submerged and will prevent water from entering them due to sealed assembly.  Take the precaution to ensure that your fixtures will meet all safety and application standards for an underwater environment prior to purchase or installation.

Ingress Protection (IP) ratings specify the environmental protection the enclosure provides.

The IP rating normally has two (or three) numbers:

An “X” can used for one of the digits if there is only one class of protection, i.e. IPX1 which addresses protection against vertically falling drops of water e.g. condensation.

IP First number – Protection against Solid Objects

IP Second number – Protection against Liquids

Voltage Requirements

When weighing your options on which type of fixture to choose, cost, convenience, and the size of your project are important. If one were to complete a large project for the grounds of a grand hotel, for example, line voltage (120V) would be the ideal option as vast distances may exist between the focal point and the fixture itself.

While it’s also true that standard incandescent bulbs can be found at virtually any hardware or household goods store, in an age where environmental awareness is important to daily life, technology and the public are moving in tandem towards different solutions. Since line voltage lighting consumes much more energy and will typically require the expertise of a licensed electrician, more homeowners are choosing low voltage (12V) options. Low voltage fixtures are notably the safer and less hazardous of the two choices, are often smaller, and easier to conceal within a natural landscape. They also have the added benefit of lower cost over time. Note that a transformer is required to convert to the lower voltage for fixtures which will be used underwater. You may also make use of photocells and timers to save on electricity consumption costs even further.

Let’s take a look at some examples of the different types of submersible low voltage products available today:

Low Voltage Halogen

This LED lights consume approximately 75% less power than incandescent units for the same amount of light output. This amounts to a sizeable savings over their life span. Moreover, standard underwater LED fixtures consume about 1/5 of the power as standard incandescent bulbs!

Besides energy savings, the nature of LED production makes them ideal for underwater applications. There are no bulbs to change as LED fixtures typically come in a permanently sealed housing. Sealed construction means underwater lights may be left in a permanent location with no concerns about extra cable allowances, or making provisions to change bulbs. They should, however, be accessible in order to clean the lenses during regular pond maintenance.

Rats and mice are quite common house pests; once they find your home to be a safe place to live in and that there are different sources of food there, they will be reluctant to leave. Not only do they pose a health hazard, they also tend to cause a lot of damage to various features on your property and will chew through the insulation of your electrical wiring.

This can affect the system and impact the supply of electricity throughout your property and can be a fire hazard as well. Here are some effective tips to prevent rodent damage to the electrical wiring in your home:

Since rodents are nocturnal creatures, you won’t really see them running around your home in the daytime. However, if you are wary, you will surely hear scratching and chewing sounds in the walls of your homes. You may also hear scurrying noises coming from the attic. You should look out for nesting material or droppings and will typically find these in enclosed spaces.

It’s important to check the wiring’s insulation with regularity to ensure that it’s intact and that it hasn’t been chewed by rodents. The unfortunate part is that this isn’t something you can do for wiring behind walls. However, if you are undertaking any repairs, renovation or upgrades, take that as an opportunity to check the wiring for signs of rodent damage.

If you notice any flickering or experience power fluctuation in a certain room or part of the house, or if you find that a certain circuit breaker keeps tripping for no specific reason, get the system checked for rodent damage.

If you notice any signs of a rodent infestation, it’s important that you act without delay and take some steps to get rid of them. Buy some spring traps and rat poison from your local hardware store and set these at different places where you have seen rat droppings or heard noises. Even as you do this, it’s equally important that you also identify where these pests are entering your property from. Place the bait or poison at these points along your home’s exterior walls.

If you find the infestation to be too severe or if you aren’t too confident about using DIY rodent control measures, call a licensed electrician to inspect the wiring and check it thoroughly for damage. If they confirm that the damage has been caused by rats, it’s a good idea to call pest control professionals to handle the rodent control for you. They will provide solutions and give you advice on the steps you can take to prevent these pests from entering your property.

While the rodent control professionals will ensure that the rats are eliminated from your property, they will also advise you on how to seal all the possible rodent entry points in your home. Aside from very evident points such as doors and open windows, these pests can easily squeeze their way into the indoor spaces of your property through holes and large cracks. If the cracks are too small, they won’t shy from chewing their way in through the loose concrete of the walls.

If you have noticed any rats or mice on your property, do not hesitate to call us to get the wiring checked. We handle all types of commercial and residential electrical installation, repair and upgrade jobs. For more information, contact the AllRound Electrical team at this number – 1300 169 263. Alternatively, you can write to us at our email address.

Thanks for reading,1300 169 263

On the topic of commercial lighting and products, we often hear the term Northeast Energy Efficiency Partnerships (NEEP for short), which is a non-profit that was founded back in 1996. There general mission is to accelerate the adoption of higher efficiency lighting within the world of commercial lighting products.

In conjunction with DLC, there is a group known as the Industry Advisory Committee (IAC). There general purpose is to support the mission of the DLC through education, collaboration, and expertise within the field.

So far you can probably start to notice that the DLC is basically all about efficient commercial lighting. But what role are they actually playing within the commercial lighting products industry? Well, the DLC runs something known as the Energy Star, but DLC is all about commercial products where Energy Star is more about consumer products.

On this Qualified Product List provided by the DLC, you can search up products by certain companies that claim to be DLC certified to confirm that they truly are.

While searching through this database, you may notice that some products are listed as “DLC Standard” and some as “DLC Premium.” Do you know which is better? You guessed it, the DLC Premium! The reason that a product being listed as premium rather than just standard is that to be qualified as premium you have to pass even harsher and more strict guidelines. Do you know what that means? It means even more efficient lighting fixtures for those products that have successfully been listed as DLC Premium.

Want to give it a test and see for yourself how this QPL works? Follow these simple steps:

1. Visit extremely helpful link over on the official DLC website that go’s over everything you need to become listed, standard or premium. As you can see on the official DLC website, becoming DLC Premium is only for the most efficient and quality lighting products.