When you think of home security you likely think of alarms to alert you to home invasions, or sensor lights to warn you of movement outside your property. While these are both very important components of home security, comprehensive and automated home security goes far beyond burglary monitoring systems. We can also alert you to—and protect your home from—natural elements such as flooding and extreme temperature changes with temperature and flood monitoring.

Flood monitoring is an alarm device that is integrated into your comprehensive home security system. Flood sensors can not only activate a local alarm, but can also notify a central station that is monitoring that residential alarm 24/7.

Flood damage is actually among the most common homeowner insurance claims, as well as one of the most expensive. A water sensor can not only detect water coming from a flood due to inclement weather, but also that from plumbing systems. In fact, there are flood sensors available that will automatically shut off your water if your pipes break open.

You can place flood sensors near all your major plumbing fixtures or even in your attic in order to detect a leaky roof. Undetected leaks, and floods, can lead to the development of mold, mildew, and other contaminants that can be harmful to your home and to your health. Additionally, flood damage can result in ruined carpets, warped wood floors and furniture, damaged cabinetry, and more.

Other areas of your home that can benefit from flood sensor placement include your basement, bathroom or laundry room. Most of these flood detectors include an external component and can operate as a temperature sensor as well. This allows them to function in cold environments.

When you’re purchasing LED strip lights, there are numerous details and specifications upon which to base your decision. Color, length, and intensity are some of the major deciding factors, but there are many unthought-of product aspects that further customize light strips and what they’ll require when it’s time to install them. For example, a decision between 24-volt strip lights could change the products needed for your project.

While it depends on a light strip’s current draw, LED type, and number of LEDs, 24-volt LED strip lights tend to have longer maximum runs than 12-volt strips. This is because higher voltage carries more power. All strips have a maximum run, which is the length of continuous strip that can be powered without experiencing voltage drop. Voltage drop happens when the supplied energy of a power source is reduced as electric current flows through wire (or any other pieces of equipment that do not supply voltage on a circuit). If a run of strip is too long, reduced energy across the strip will lessen its intensity near the end.

Because they can handle more power, many 24-volt LED strip lights tend to have brighter LEDs, dual-row LED configurations, or single-row configurations of more LEDs. In these instances, maximum run might be the same as a 12-volt strip. However, keep in mind that these are more powerful strips with more LEDs or higher LED intensities. An identical 12-volt LED strip light would have a shorter maximum run.

Make sure to check any light strip’s specifications or description for its maximum run.

If you have questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

Most people have dealt with a power cut at some time or the other. There could be a very bad storm or lightning could strike and the power could get cut; but it also returns quite quickly. However, you might switch on the computer and notice it has stopped working.

This is caused when lightning hits a power line which results in a sudden surge on the electrical pressure that overloads the electronic circuitry. It’s true that lightning strikes cause power surges; even everyday appliances in our homes can cause power surges every time they are switched.

Over time, these seemingly small surges can cause a lot of damage to your property; and they slowly reduce the lifespan of your refrigerator, computer or air-conditioner or any other appliance that’s plugged into a power outlet or any that’s been hardwired into the electrical system in your home. The one way to protect your property from damage is to learn more about what power surges are.

Across Australia, the basic electrical voltage for residences is 230V + 10% up to – 6%. The load vibrations are taken into account in this particular range, as the appliances quickly cut in & out. In case the voltage increases above the working range of the appliance, it can result in arcing in the appliance.

These arcs generate heat, and these results in damage to the electrical components within the appliance. This type of damage is cumulative and the appliances are still able to function normally, till the point the damage becomes so excessive that your PC or TV just stops working for no apparent reason.

For all plug-and-play appliances like your TV and PC, you can connect them to a point-of-surge protector, and that becomes a very easy solution. This particular system is very much like a standard power board. You simply have to plug in the appliances that have to be protected, into the device. This device doesn’t suppress/arrest the surge; it redirects that surge straight into the ground. If you have to protect only a single appliance and a point-of-use protector doesn’t fit, then it’s possible to get a special outlet with the built-in protection installed.

Even as the point-of-use devices protect various appliances which are typically plugged into any power outlet, you would have to get another device to protect those items which are hardwired into the electrical system of your home, including the lights and air-conditioners. These devices can be easily complemented by an electrical panel surge protector.

If it’s installed inside the mains, it will level out the fluctuations and power spikes; or it might also stop them well before they reach the devices. When a mix of electrical panel surge protection and point of use protection are used, it helps provide your equipment and devices from very powerful voltage spikes.

If you have consistently experienced any power surge issues in the past or if you want to just protect your property against the probability of surges, you only have to call us and speak with our experts. They will provide you with all the information and guidance you need and will ensure that you get the kind of solutions that work perfectly for you.

For more information, simply speak with the experts at Allround Electrical and take their advice on various aspects of CBUS installations. The number to call is – 1300 169 263. You can also write to us at this email address.

Thanks for reading,1300 169 263