Are you having problems with some of the outlets in your home? While actually trying to repair an electrical outlet on your own can be dangerous, you can at least diagnose many of the most common electrical outlet problems. Before you call Kolb Electric, see if you can pinpoint the problem by trying the following steps.

If you were trying to plug something into the outlet and it wasn’t working, try plugging it in somewhere else. If it works, it’s likely a problem with the outlet. If it still doesn’t work, the problem is with the device itself.

Look for any wall switches and turn them on. If the appliance works after flipping the switch, you shouldn’t have any further problems.

Check other outlets near the dead one. If any more don’t work, mark them with tape.

Unplug everything from nearby outlets to eliminate the possibility of a short or overload.

Make sure the circuit breaker isn’t tripped. The circuit breaker will be located in the breaker box, usually in the garage, basement, or kitchen. To see if it is tripped, open the box and see if any of the breakers are in the RESET or OFF position. If they are, turn the appliance off, switch the breaker back into the ON position, then try to device again.

Check for blown fuses. To do this, turn off the main switch and use a flashlight to see if any of the fuses are burnt or blackened.

If the dead outlet is a GFCI (Ground Fault Circuit Interrupter), try to find out if there’s any reason it may be tripping. GFCIs shut off power to outlets when they detect a leak in electrical current, so if they continue to trip after being reset, there could be a dangerous current leak that requires an electrician’s attention.

If you have dead outlets in your home, or if you need electrical troubleshooting in Maryland, Virginia, or Washington, DC, call Kolb Electric today!

Must-see landscape lighting designs include top-quality LED, Energy SMART and ENERGY STAR-rated products, as well as solar-powered specialty lighting and fashion-forward spot and flood lights.

1.  Professional Series transformers and Design Pro LED lighting from Kichler Lighting

12-volt LED path, spread, deck and patio lighting, water lights and wall washers are now available in a flattering warm white 2700K and 3000K from Kichler Lighting.

2.  LED “Luna” deck lights from Hinkley Lighting

Dimmable to 25% and available in attractive finish options:  Bronze, Light Almond, Satin White and Titanium, “Luna” deck lights from Hinkley Lighting provide a tailored, energy-efficient elegance to your landscape lighting design.

3.  “Telsa” Energy SMART flood and spot lights from WAC Lighting

“Telsa” Energy Smart LED and ENERGY STAR-rated outdoor floodlights provide superb illumination that goes the extra mile!

4. “Alumilux”  path lighting from ET2 Lighting

“Alumilux” path lighting from ET2 Lighting comes in a variety of style options to present your home or office exterior with Energy Smart LED illumination.

5.  Solar landscape lighting from Kenroy Home

“Seriously Solar” landscape lighting from Kenroy Home is the go-anywhere and go-everywhere option for highlighting outdoor areas from pathway to pond.

* “Seriously Solar” lanterns from Kenroy Home are versatile outdoor decor accents by day and instant table top or outdoor hanging lamps by night. Available in Blue (shown) or Red, these ceramic lanterns contain removable LED solar discs that will constantly store a charge when placed in optimal sunlight.

See all new landscape lighting designs at 1800lighting.com.  Send in a picture of your outdoor areas for a free consultation and novel landscape lighting ideas from the lighting professionals at Capitol Lighting.

We use so much electricity, and do it so casually, that we don’t tend to stop and think about the outlets that provide us with our electricity very often. In fact, most of us only give outlets much thought when we are cursing the fact that there is not an available outlet when our phones are about to die. Do not be fooled by their ubiquity, though; our electrical outlets are among the most important features of our electrical systems. That is why it is so important that you know for certain that your outlets are appropriate for the task at hand. Below you’ll find some information regarding GFCI outlets. If you require any GFCI outlet services in Boston, MA, contact FB Electrical Services to get started.

A GFCI (ground fault circuit interrupter) outlet is one which provides homeowners with ample protection from electric shocks and, potentially, fatal electrocution. You would likely be able to identify one if you knew what you were looking for; these are the outlets which feature both “test” and “reset” buttons on the outlet face plate. GFCI outlets measure the electricity put forth against the electricity being used by the device in question. If there is a difference between the two levels above an allotted amount, the outlet determines that electricity is finding a way in which to ground itself: potentially through the body of the user. The electricity is shut off nearly instantaneously in such instances.

GFCI outlets are, according to the National Electric Code, now required in all new kitchens, bathrooms, unfinished basements, and in many outdoor receptacles. Generally speaking, it is a good idea to have GFCI outlets installed in any area where water is likely to be present (hence the aforementioned requirements). While not mandated by any law, many homeowners are choosing to replace outlets throughout their homes with GFCI models. Contact us if you have any questions or if you’d like to upgrade your outlets for better protection.

Have you ever received a nasty shock when your electric bill arrived? Maybe the amount you owed skyrocketed when you turned on the air conditioning for the summer, or the refrigerator started breaking down and consumed an excess of electricity. No matter what the cause of your sky-high electric bill, once you use the electricity, you have to pay for it. One way you can get a heads-up on any unusually high consumption is to keep an eye on your electric meter. Read on to learn how to read the meter so you are prepared when the bill shows up at your door.

Is Your Meter Digital or Dialed?

If you're lucky, you have a newer electric meter with a digital display, making it a cinch to see how much current is coming in. Simply compare your consumption from one month to another and you'll quickly be able to figure out if you're using up more energy than normal.

Traditional electric meters are a bit trickier to read, but you don't have to be an electrician to decipher them. These older meters have dials instead of a digital display, and they don't all spin in the same direction. With a little practice, however, you can figure out how much power you are using and get a ballpark idea about what the bill will be.

Spinning Clockwise, Spinning Counterclockwise

On a traditional electric meter, there are five dials that go between 0 and 9. To read the meter, follow these steps:

There's one more twist -- if the dial is pointing exactly to a number, and the next dial to the right points to a nine, you should subtract one from the dial that points to the exact number.

Now you've got your reading, and you can simply track how much it changes from month to month to get a handle on your energy use.

Getting Smart About Your Meter

If your utility has already implemented smart electric meters, it's even easier to follow your consumption. Not only is the display in easy-to-read digital form, but the meter can provide updates on how much you're using as often as every fifteen minutes. That way, you can get an alert in real-time if your usage spikes so you can track down the culprit before you have to shell out a fortune in bills.

In addition to monitoring your own consumption, it's a good idea to watch the meter so you will know if the utility company accidentally overcharges you. If you need any help figuring out how to read your meter, contact a trusted electrician today.