Aluminum LED profile housings allow you to create customized light fixtures with LED strip lights. Our Klus brand LED channels are available in many different styles, including recessed-, or flexible, O-shaped, and more. Available in 1- and 2-meter lengths, the channels can be easily cut for any application from under-cabinet lighting and bookshelf lighting to showcase lighting and transition strip lighting. They’re available with a variety of lens options, such as clear, frosted, and etched that complete the profiles. We’ve put together a step-by-step guide for using these channels to create your own light fixtures. Please note that your specific channel might vary from the one used in this tutorial.

Materials needed:

1. With a pair of clippers, carefully clip through the clear plastic heat shrink as shown in figures A-C. You will want to take your time and be careful not to cut the strip’s wires while removing it.

2. Lay the LED strip into the channel, and position it along the bottom so that the ends of the strip and the channel are lined up (fig. A). Now, remove the paper from the strip’s adhesive backing (fig. B), and adhere the strip to the LED channel—starting at the lined end and working your way to the other end of the strip. Be sure to leave roughly 1/4-inch free at the end of the channel so that you can install the end cap as shown in figure C.

3. If one of your end caps doesn’t come with a pre-drilled hole, you will need to drill your own to allow the wires of the LED strip light to come through. In this case, we used a Dremel tool, but other options are viable as well. Regardless of the tool you choose, it is helpful to mark the end cap where you would like the wires to come through. Start the hole small, and increase the size as necessary.

4. Place the end cap on the wired side of the strip by threading the wires through the end cap as shown in figure A. Insert the end cap into the end of the light bar, and push firmly until it is fully in place (fig. B).

5. On the open end of the bar, slightly peel up the end of the LED strip (fig. A); this is necessary to install the end cap. Now measure your channel lens, and trim off the excess with clippers (fig. B). Be careful when trimming to avoid cracking the plastic. Excess material can be lightly sanded off. Once the lens has been cut to the proper length, slide it into the channel, and install the end cap as shown in figures C and D.

6. That’s it! Your customized LED light fixture is complete and ready for installation, which we will cover in the next step.

7. Mounting this LED profile is as easy as applying double-sided tape to the back of it and sticking it to your intended surface. Be sure to cut the tape to fit the back of the LED profile and to leave the tape backing on the side not attached to the channel until you are ready to mount it.

For most LED profiles, mounting clips are available for a more permanent installation.

If you have questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

Main attraction: The hand-applied Vienna Bronze finish and natural branch-like detailing     “Whitman” wall sconce lighting   “Whitman” pendant lighting   “Whitman” bath vanity lighting

Main attraction: A distinct Marquis diamond cut design and hand-applied crystals

“Marquise” pendant lighting

“Marquise” wall sconce lighting

Main attraction:  Silver Quartz finish with wooden beads

“Adele” semi-flush fixture from Capital Lighting Fixture Company

“Adele” chandelier from Capital Lighting Fixture Company

“Adele” wall sconce lighting from Capital Lighting Fixture Company

See top-rated designer lighting compositions at 1800lighting.com.  Visit a Capitol Lighting showroom to view the latest in home lighting and decorative accessories.  Lighting design experts are on-hand to help update your environment and personalize your space with the most distinguished illumination.

Many homeowners know the pride and satisfaction that results from completing DIY repairs and improvements. But when it comes to electrical work, the stakes of making a rookie mistake can be high.

There are several common electrical projects that aren’t complicated or extensive, but even the simplest jobs can result in serious injury or property damage if they’re performed improperly. Before making any plans to engage in a DIY electrical project, it’s important to know the risks.

What Can Go Wrong

Electricians undergo an enormous amount of training in order to earn the licenses and certifications they need to do their work. That’s because mistakes could not only be dangerous for them, but also for anyone in the homes or buildings they’re working on. Even if you know your way around the circuit box, here’s what an electrical mishap can bring:

Hiring Electricians Saves Money

One of the most common reasons why electrical novices attempt this sort of work is to save money. But that plan can easily backfire even if no one gets hurt in the process.

Poorly performed electrical work can spark destructive fires. It can also fry circuits, destroy fixtures and even damage major appliances. When things go wrong, the cost of repairs is usually several times what it would cost to hire an electrician in the first place.

Making matters much worse, homeowners insurance companies will typically ask for confirmation that electrical work was performed by a licensed electrician before covering any damage from a related event. If your insurance carrier learns that you did the work on your own to save a few dollars, you could lose your claim or even invalidate your policy. Be sure you understand your full policy details before engaging in DIY work.

Know the Code?

When you hire an electrician, you’re not just passing the risk along to a professional -- you’re hiring someone who has knowledge you don't even realize your lacking.

Electrical work is constantly getting safer and more reliable through updates to the electrical code. Licensed electricians are required to keep up with this code as it evolves, so when you work with a professional, you can count on receiving the safest electrical work possible. When you go it alone, you may follow outdated methods because you weren’t aware of the code update.

Don’t take a chance. Your life and home are too valuable. When you need electrical work performed safely and properly, call upon your knowledgeable, licensed, local electricians.