When a fire breaks-out, most people just assume that it’s been caused by some inflammable substance. While that might be the case, it’s important to keep in mind that fires can also be caused by electricity. The one thing to keep in mind is that an electrical fire can’t be doused by water. Faulty or old electrical installations can lead to a fire and cause untold damage to life and property.

There are times when the electrical equipment or appliances in an electrical system can be the cause of overheating & overload, which can end up causing a fire. So, exactly what is it that causes an electrical fire? There are three main reasons, let’s take a detailed look at what these are and what can be done to prevent this from occurring:

Some properties have wiring that is decades old and electrical wires do tend to deteriorate with age. In fact, if the wiring in your house is over 15 years old, the recommendation is that you should get the entire property rewired. Older wiring wasn’t designed to bear the electricity load that current-day appliances demand. At times the electrical contractor might have cut corners and installed wiring of poor quality and this can lead to a similar problem, both of which can result in fires.

Arcing is quite a common problem with electrical wiring. As mentioned earlier, most homes have a range of heavy-duty electrical appliances. When you run a number of these appliances simultaneously in your home, it results in overloading and overheating of the wires. If the wiring is old, it will get heated up which will cause the insulation around it to melt – this results in arcing and an electrical fire may erupt too.

There are times when electrical wires are just too close to an external heat source which causes the outer insulating sheath of the wiring to melt. If this goes unnoticed, it can result in an arcing and fire.

Regardless of what has caused the electrical fire, if you attempt to contain it by pouring water on it that will escalate the issue. Water doesn’t have any effect on electrical fires; in fact, if you try to use water to douse an electrical fire, you can get electrocuted. What you need to deal with an electrical fire is a Class C fire extinguisher.

This type of extinguisher has dry chemicals that help contain the fire. Depending on how severe the fire is, it might be possible to completely bring it under control using a Class C fire extinguisher. If you don’t have this extinguisher, baking soda might help to some extent.

In case there is a break-out of fire on your property, the first thing you should do is switch off the power-mains; this is effective in containing the fire. Ideally every home and commercial establishment should have a Class C fire extinguisher or two, based on the size of the property and that should be used in case of any fire in the electrical wiring. An electrical fire is an electrical emergency and it’s crucial that you keep the number of a local, reliable electrician handy.

Never try to fix any electrical issues on your own. That can only lead to more complications and will compromise the safety of your property. We at Allround Electrical can rectify all types of electrical faults and we provide a range of electrical services. For more information, contact our friendly team today at this number – 1300 169 263. You can also write to us at this email address. You may also reach us through this online contact form.

Thanks for reading,1300 169 263

Acquiring Pennington generators falls under preparedness for emergencies. With such equipment available, there is no need to worry about unexpected power outage for there is a ready alternative source of energy to run several appliances, depending on the power capacity. In purchasing such apparatus, several aspects should be considered. It offers an array of advantages and disadvantages, thus these should be weighed before considering the purchase of equipment that will best fits a household’s needs.

Also referred to as the emergency power source, it is generally known to produce clean energy, converting fuel into electricity in the process. Most use gasoline, because this is one of the cheapest fuel alternatives. However, some run with diesel or propane. Fuel is readily available almost everywhere, but some prefer storing fuels at home so that when the need arises, it can be easily loaded to the generators. Note however that fuel, especially those that are fossil based have short shelf life. Storing would entail the purchase of anti-coagulants to lengthen the storage life of fuel. Therefore it is not also advisable to keep the fuel inside the generator set for it may pose a certain degree of risk to the system, which may lead to permanent damage.

The engine of the equipment requires regular test runs. It is not recommended to allow it to stand idle for a long time. Allowing it to stand idle would lead to malfunction. Once every month, even in the absence of a power outage, Pennington generators should be run and allow to run so as to optimize its operation. This is to prevent the scenario of having a dysfunctional system when real power emergency occurs.

In running the engine, an average noise level of 60-70 decibels is produced for portable type and even higher for heavy duty types. Portable Pennington generators actually exceed the noise level produced by normal conversation by a few decibels, thus it is more advisable to choose this instead. In general, noise is a distraction that can hinder the normal flow of activities in the household. But it should be noted that power outage does not happen often and the noise is just a little sacrifice compared to the benefits that we reap from a reliable alternative energy source in times of emergency.

The dimensions of the entire package should likewise be considered. Compact versions, considered to be space savers, are more favorable because it is easier to keep and store compared to the bulky heavy duty type. However, if the heavy duty type is preferred, especially for larger Pennington households with larger electricity demand, transportability and mobility can be assured if the generator has built in wheels.

Lastly, it should be made sure that the product purchased complies with the safety and environmental standards. This way, it can be assured that only clean energy is generated and no harmful fumes that can adversely affect the health of family members are emitted.

In choosing Pennington generators, make sure that it is worth the investment by studying carefully all the aspects of the equipment.

Why do electricians and electric companies insist on using copper wiring above all else? It turns out that copper wiring is the best material for the job, based on its various properties. For example, copper is extremely malleable and ductile; in addition, it also comes with very excellent electrical and heat conductivity. It can be considered virtually perfect for wiring because it is rustproof and robust. Since it has these properties, copper wiring is able to carry an electric current over a much longer distance than other sorts of wires. While copper has a number of uses—it is used from everything as a constituent of different metal alloys to a construction material—its most popular use is in the electrical industry and for creating wires.

Sometimes, life is funny and throws you a little curve ball now and again. One of the things we have come to rely on in life is electricity. When it doesn’t work as expected or it doesn’t work at all, it can be extremely frustrating. You want electricity when you want it and not after you have had to flip breakers, unplug things and wiggle wires. It is actually very dangerous to mess with switches, outlets and appliances that are not working as they should. It is best to leave it up to a professional electrician in Pasadena to handle any kind of electrical problems. The crew at The Electric Connection can get your home’s electrical fixed and working properly again.

It is important you recognize the signs of an electrical problem that can lead to something as dangerous as an electrical fire that threatens the safety of the home’s residents. Your Pasadena electrician wants you to watch out for the following;

*A popping or snapping sound coming from an outlet or light switch *The switchplate, outlet or wall around the area feels warm or hot to the touch

These are all signs you have a problem that needs some attention from an electrician. Pasadena homeowners should call at the first sign of any of these problems and avoid using the outlet or switch until it can be looked at. If you can shut off the breaker that feeds the problematic switches and outlets, it would be safer. Give The Electric Connection a call today and schedule your electrical repair.

Summer is not typically a season we need to worry very much about huge power outages. However, this is a good time of the year to consider what your generator needs are, before you actually do need it in the winter time. Homeowners in the Midwest are subjected to cold weather and winter storms on a yearly basis, which is made worse when severe weather knocks the power out.

Many homeowners might rely on a portable generator, but this might actually be insufficient for all the needs of your home. Additionally, they only function for a limited amount of time. For this reason, we highly recommend the installation of a whole-house standby generator.

Comfort: When winter does roll around again next year, you’ll want a reliable heating system. But most heaters won’t function with a complete loss of power—not even natural gas heaters as most require an electrical ignition these days. Huge power outages typically happen during extremely cold weather. The right standby generator can make sure that your heater is able to do its job, keeping you and your family warm.

Safety: Does anyone in your home rely on electrically powered devices for some type of medical condition? If so, it’s essential to have an effective standby generator. Should you need electricity for any medical reasons, it’s time to inquire about a whole-house standby generator.

Portable Generators are Insufficient: As we mentioned briefly above, portable generators are often insufficient for all the needs of your home. This type of system can be fine for a small camping trip, or even to keep in your car in case of emergency. But they are not designed to power an entire home, and won’t last long enough if you try to use it for such purposes.

Peace of Mind: This is perhaps the biggest benefit of having a standby generator installed. Even if you never face a significant power outage in your home, you’ll always know that you are prepared should one occur.