Why is a bad GFCI outlet such a big deal? To put it simply, they exist to protect you from electrical shock. As required by electrical code, these outlets are in places within your house where there is an increased risk of electrocution. These include bathrooms, kitchens or outside (wherever water is likely to be present).

GFCI outlets come with a sensor designed to identify changes in current, which can indicate unsafe conditions or the risk of shock. There’s a breaker inside the outlet, which trips when there is a surge in current. This shuts down the power supplied to the outlet and any connected outlets, protecting you from electrical shocks.

GFCIs come with two buttons on them (usually black and red), with one serving to test the outlet and the other for resetting it after the breaker inside has tripped. A bad GFCI is a serious problem, as they are too important for you to ignore them for any amount of time. It is, therefore, crucial that you stay aware of when you might have an issue with one of yours.

In the majority of cases, a GFCI outlet protects you by not providing power. If there is an issue with an appliance plugged into it, the power would likely cut off long before you even get the chance to use it. When this happens, it can be easy to assume there’s something wrong with the outlet itself. But in many cases, its breaker tripped for a good reason. GFCIs are also designed to shut themselves off in the event of a person getting shocked, which isn’t always easy for it to determine with much accuracy. In other words, your GFCI outlet breaker might trip when you’re not actually in any danger.

The GFCI detects current that branches off from the intended circuit, even if the branches are small and harmless. This can include instances of a wire making contact with another component of the receptacle, which can be completely innocent. When the cause of a trip is a passing occurrence, you should be able to reset the outlet breaker with a simple push of the correct button.

Outlets can get worn out and lose some of their effectiveness over time. This also applies to GFCIs. If your GFCI outlet is tripping much more frequently than it should, it could mean it’s nearing the end of its lifespan. This is due to GFCI outlets losing the ability to adjust to changes in current as effectively as they used to. The result is that trips begin occurring for reasons that were never a problem in the past.

If your outlet breaker is tripping every time you use a hair dryer, and it never did that before, it’s a sure sign you have a bad GFCI outlet. If this becomes the case, it’s important to get it replaced as soon as possible! These outlets are too crucial a safety measure for you to delay on getting a new, functional one.

[Estimated read time: 5 minutes]

With the rising temperatures comes the inevitable rise in energy bills. To keep your home as energy efficient as possible, we’ll be going room by room explaining just how you can save money while keeping your home cool.

Starting with the living room, there are a few simple steps you can take to bring energy savings and make it as energy efficient as possible.

What is Energy Star? Energy Star is a program that offers energy efficient consumer products. Energy efficient appliances with the Energy Star logo typically use around 25% less power than conventional models.

Energy Star products are the way to go if you wish to use less power while also saving big on your energy bill.

As we mentioned in our guide for different types of lightbulbs, there are many options available today which offer different brightness (known as lumens) and use less energy.

By far the best options for lighting your living room are LED light bulbs. These types of light bulbs are energy saving and emit LED lights, which reduce energy consumption considerably.

LEDs might have a higher upfront cost, but they offer an energy saving edge, reducing energy consumption up to 80%.

Power strips are a clean alternative to overfilling your outlets. By conveniently switching off multiple appliances at once, you have complete control over how what appliances get energy.

Traditional power strips are simple: you connect the devices and turn off a switch when not using them. Newer versions called advanced power strips feature a variety of other features that might benefit you.

Advanced power strips are designed for areas where many electronics are plugged in, such as entertainment centers or home offices and provide greater control over energy usage through built-in features.

There are multiple types available right now including:

Some power strips also feature a surge protector which not only give you complete control over your appliances but also protects them from damage during thunderstorms or power surges.

While power strips might be of great help to any home, the main culprit for those extra costs are energy vampire appliances, or appliances that use energy while on stand-by.

Appliances like these could end up costing more than $200 per year for the average home.

Vampire energy loss, also known as vampire load, vampire power, or vampire draw is a simple term to explain the use of electricity by appliances that are in standby or switched off.

While most appliances might indicate that they are turned off, they might still be drawing power. The end result is unneeded power being wasted as appliances lay unused.

Video game consoles such as the Playstation 4 and Xbox One are notable for their high energy demand and could result in up to $40 in costs during standby.

Computers, including laptops, are also some of the biggest energy vampires, costing up to $30 if left plugged in while not in use. Laptops might need less power, but leaving them plugged in could result in yearly costs up to $15 when not in use.

To easily reduce these costs, safely group as many of these appliances into a power strip. By easily switching off the power strip when not in use, you will be much more in control of how much energy they use.

Televisions are the kings of power consumption, with 5 hours of daily use costing up to $160 per year while in standby mode as well as with daily use.

Plasma TVs are notorious for their usage of energy. Instead, opt for LCD screens which will reduce the amount of energy you draw. Also, change your TV’s settings to dial back on energy consumption.

Most TVs have a store demo option selected for the picture which ups the brightness and results in a high energy usage. This translates to higher energy bills and more heat. By using the power-saver mode, you decrease the amount of energy used.

If you have multiple appliances connected to the TV, turn them off when not in use. TV manufacturers of today have reduced the usage of standby power, but connected appliances might draw more energy.

These could include DVRs, Blu-ray or DVD players, as well as streaming devices such as Roku, Apple TV, and more. While useful, they might be putting a dent into your energy bill and end up costing more with time.

Window shades, blinds, and curtains are more than just useful for decorating your living room. Dark curtains block sunlight from entering and can be closed during the day to reduce the amount of sunlight that enters, thereby reducing cooling costs.

Blinds are as useful and can reduce heat gain by up to 45% but offer the benefit of being able to be adjusted manually.

Making your living room as energy efficient as possible might seem like a daunting task. By following the above tips and ensuring that you use only the most important appliances, you will be well on your way to ensuring your home is ready for summer.

From LED Lighting installation, to ceiling fan room installation, Bryant Electric Service can help your living room be the highlight of your home.

You use it every day, but do you really understand electricity? It’s important, because, without understanding electricity, it’s hard to maintain electrical safety in your home. In order to understand electricity, you basically need to grasp five key concepts; we like to call them the five hidden mysteries of electricity.

We hope we’ve made electricity a little less mysterious and provided information that leaves you better able to understand electricity. At ElectricMan, we want to be your go-to source, whether you need information about electricity or professional help with an electrical installation, project or service. A family-owned business, we offer quality electrical services because we only employ professional, licensed, certified electricians. Don’t ever hesitate to call. We’re available 24 hours a day, 7 days a week. Rain or shine, we’ll be there to fix any electrical emergencies that may come up! Visit ElectricMan’s website to learn more, or connect with our online community on Facebook, Twitter, Pinterest and Google Plus.

As a Top Plano Electrician, I know better than anyone how powerful and useful electricity is. It also makes me more aware of what most people tend to ignore or forget: electricity is dangerous. Electricians are required by law to carry insurance, and for good reasons. Electric current is capable of starting fires and destroying your property and equipment in a matter of moments. The proper safety precautions really can save lives, and there‘s always something we can do to improve home safety.

One of the most important precautions is located in your electrical panel: the circuit breaker. It is designed to keep you from using more electricity than the wiring or receptacle can handle at one time, what we refer to as overcurrent protection. This protects your wiring from taking on too much current, which can cause the coating around your wiring to melt, the leading cause of electrical fires. Circuit breakers serve another purpose as well; not only to protect from surges coming from outside your home, but from potential hazards within it as well. Current flowing through a failed piece of equipment or appliance can cause sparks, which have the potential to start fires or damage other electrical devices. A properly functioning circuit breaker can shut off the power to this device. It’s very important, however, that you use a circuit breaker of the proper size for the circuit to ensure that your wiring is properly protected.

Circuit breakers come in specialty varieties as well; the most important are ground fault circuit breakers (GFCI), for wet locations, and arc fault circuit breakers (AFCI). AFCI’s, in particular, can help prevent some of the most common dangerous situations in your home.

I’ve dealt with plenty of cases where electrical fires have started because people ran an extension cord under the carpet, so that they can power the lamp in the center of the room. Over time, people walking over the cord stretches out the wiring, making it so thin that the current overloads the thinly stretched wire, creating an arc fault; the electricity “jumps” the wire, completing the circuit in a way the cord can’t handle and generating heat that starts a fire. Arc fault circuit breakers prevent this by shutting the circuit down when the arc fault occurs.

So what do you need to know about arc fault circuit breakers? To start with, by code AFCI’s should be installed on any circuit that isn’t protected by a GFCI or directly wired into an appliance. It’s in your best interest to have your safety devices routinely inspected to maintain their optimum performance and capabilities; in particular, your circuit breakers should be inspected at least once a year. The inspection process is quick and relatively inexpensive, and something that simple really can save the lives of you and your family.