The media room is perhaps the most lived-in area of your home.  Whether you are watching TV or reading a book, the lighting should be comfortable, energy-efficient and beautifying.  Tune in to a picture-perfect setting with lighting tips from Capitol Lighting’s professional consultants.

1. Track and Recessed:  General or ambient lighting is a must in any room, but it is especially important in a multi-functional space such as a den or media room where there will be a wide range of activities that call for specific light settings.  Overhead lighting should be installed as part of the initial room design.   Oftentimes, a standard grid lighting pattern does not work well with your seating and furniture layout, so it is best to draw up your lighting design in the initial stages of planning.

NOTE:  In general, recessed cans should be installed 30 inches away from the wall and 4-5 feet apart.

Track heads, recessed and/or rail lights should be strategically located so as not to create glare or cast unflattering shadows upon individuals in the room.

Rail lighting from WAC Lighting highlights artwork;  hanging pendants provide soft ambient illumination and artistic accent light.  Rail and track lighting are highly versatile and allow for easy adjustments if you decide to change your decor.

2. Wall Lighting: Wall lights work well in a media room as they expand the space and provide an evenly distributed balanced illumination.

Image from HGTV.com “Must-see Media Rooms”

“Jaxon” wall lighting from Troy Lighting, available in a variety of color options

3.  Portables:  From sturdy reading lamps to decorative table lamps, portables are a useful addition to the multifunctional media room.  They provide individualized task light, as well as general illumination throughout the room.

Room design by Sandra D’Amata International

Ambience table lamp (shown above), Frederick Cooper “Script Reader” floor lamp and Minka-Aire’s “Great Room” fan from Capitol Lighting

4. Control Systems:  Dimming and automated control systems are a must for the media room.  Even if you have programmed your lighting controls into your Smart phone, wall switches with a variety of room settings and dimming capabilities are a good idea and are available in a choice of colors to complement your rooms’s decor.

Dimmer switch from Kichler Lighting

5. Special Considerations:  LED bulbs and LED light fixtures are suitable for media room lighting designs, just be careful to choose all your light sources with the correct color rendering, color temperature and shielding. Look for LED light sources that are dimmable and in warm (2700K)  color temperatures. *

LED torchiere floor lamp from Holtkotter

* Solid State Lighting and LED light sources are being refined so that predictable color rendering and color temperature will be more visually accurate.  A new metric to measure LED illumination is in the works:  The Color Quality Scale (CQS) will help to identify the visual characteristics of LED light sources more clearly, but right now–a bit of trial and error may help you find LED light sources that are complementary to your media room’s decor.

3 Keys to Remember:

*  Avoid having sharp areas of contrast between dark and light–illumination should be evenly dispersed with slight variations that allow your eyes to transition from reading a book, conversing with friends or watching  TV.

* Make sure lighting/fan controls are easily accessible–opt for a remote control system in addition to wall switches.

* Go for the most energy-efficient light sources, but do not sacrifice the overall look of your room.   If you are not using fluorescent or LED light sources, opt for eco-halogen or top quality incandescent bulbs in portable light sources.

LED sign lighting provides years of illumination and low energy costs. sign modules that consume 50mA of power each. Required materials differ depending on sign size, module size, length of wire between modules, current draw, and lumen output.

Materials:

1. First, measure your sign. Although we recommend spacing module rows 3 inches apart, it’s ultimately up to you. If you want a brighter sign, place them closer together and vice versa for a dimmer sign. With the recommended 3-inch spacing, a 4-foot square sign would need 150 modules (15 rows of 10). Again, the quantity of modules needed  is based on many factors and can differ.

These LED sign modules are available in custom lengths of up to 20 modules per strand. Order 60 feet (4 feet x 15 rows) of stranded modules, and cut the strand after every 10 modules. Each strand can be cut to make two rows.

2. Next you’ll need to order a power supply that’s rated for the combined wattage of all sign modules. To ensure that you don’t overwork the power supply, confirm that the total wattage of your modules is at least 20 percent less than the power supply’s rated wattage.

An easy way to calculate this is to multiply the total wattage of your combined lighting by 1.2. In the 4-foot sign diagram, there are 150 modules with a current draw of 50 milliamps (mA) each. Since current draw is given in milliamps, multiply that number by voltage and move the decimal 3 places to the left to get wattage. This module consumes 50 mA and has 12 VDC operation, so it consumes 0.6 watts (50 x 12 = 600). Next, multiply 0.6 by 150 to get a combined wattage of 90 and multiply that number by 1.2 (90 x 1.2 = 108) to determine which power supply you’ll need. Since the result was 108, you will need at least a 120-watt power supply.

3. Next on the list is wire to connect all your sign module stands to the power supply. For a 4-foot sign, you’ll need 4 feet of 18-gauge two-conductor wire to serve as your main line plus enough to cover the distance between your power supply and where it will be wired into an electrical system. You’ll also need dual-channel T-tap wire splice connectors for an easy connection to your main line.

Before you begin working on your sign, turn off power to the area.

4. If there isn’t one already, drill a hole in the back of your sign as an exit point for your wire.

5. Use a tape measure or ruler to plot your row spacing. Leave space on one side of the sign for your module-to-main-line connections. Mount the sign modules using their double-sided adhesive and/or screw holes.

6. Insert the end wires of each sign module row into the T-tap splice connector, and clamp the other end of the connector onto the main line. The splice connectors eliminate the need to strip wire insulation.

7. Use double-sided foam tape to secure each T-tap splice connector to the inside of your sign.

8. Reattach your sign’s front cover.

9. Connect the main line to your power supply, wire the supply into your electrical system, and restore power to the area.

For technical questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

Your garbage disposal is a lifesaver.  It is a remarkably quick and convenient way to dispose of food waste.  In fact, many garbage disposals can withstand years of daily use without a beat.  But how do you keep the not-so-silent hero of your kitchen healthy?  If properly monitored and maintained, your garbage disposal can dodge the serious problems for years to come.  Continue reading for best practices and tips for extending the life of your garbage disposal.

Run Cold Water During Use

The cool shock from cold water will cause the food that is in your drain to harden.  This is ideal, since hardened food is much easier for your garbage disposal to grind up.  Many people get in the habit of running hot water down their drain, however we advise against using hot water for your garbage disposal as the high temperature can melt your food waste.  Melted food waste will adhere to the pipes of your sink and garbage disposal, which in turn can cause a clog or a more serious issue.

Watch What Goes Down the Drain

Certain materials should never come in contact with your garbage disposal.  Obviously, metals and plastics should be thrown away instead of shredded down the drain.  Many other things should be kept away from your disposal, including fibrous vegetables, bones, oils, and grease.  Here is a list of some of the things that should never be placed in your garbage disposal:

Add Some Citrus

Now, time for something that we encourage putting in your garbage disposal: citrus fruits!  Whenever you peel a lemon, lime, or orange, toss that peel down the drain of your sink and let your garbage disposal work its magic.  The peel will help to eliminate some of the food waste that is stuck to the blades and interior of the garbage disposal.  Additionally, the fresh scent will suppress any odors coming from the garbage disposal.

Occasionally Use Boiling Water

Remember when we said that hot water is not the best option for garbage disposal use?  That remains true.  However, if you are trying to wash away any excess food stuck in your system, a pot of boiling water down the drain once a month will do the job.  Keep in mind, the heat does cause the food that is in your garbage disposal to melt, which can cause clogs.  It is imperative that you do not pour boiling water down your drain more than recommended.

Keep It Running

Many people will shut off the garbage disposal after they hear a change in sound, generally indicating that the food is gone.  This method will leave bits and pieces of your food waste in the disposal, which after time can cause a clog.  To avoid this issue, we recommend running the disposal for an extra two minutes with cool, running water.  This ensures that all pieces of food waste are eliminated down the drain.  As an added aspect of protection, pump a small amount of dish soap into the disposal.  The grease-fighting powers of the dish soap will both clean the disposal and finish the job by sweeping away any stubborn pieces of food waste.

By Clarissa Allison | January 6th, 2017

A new year is the perfect opportunity to achieve balance at work and at home. Many of us have big plans for 2017, and making aesthetic and practical changes to our surroundings can kick start a positive influence that lasts throughout the year. One of the ways to refresh our environment is to experiment with new lighting options in our decor choices. Read on for lighting suggestions that will keep you on trend as well as helping with energy savings!

Arc and Tripod Floor Lamps

Lighting fixtures as main focal points  and statement pieces are what’s happening now. Modern and sleek designs that that take center stage can transform an entire space. Floor lamps in unexpected silhouettes such as arcing designs, and with clean details like linen shades add a fun dimension to dark metals. Highly stylized but simple floor lamps have returned as an important design element, and arcing floor lamps complement your reading nook or living room perfectly. Likewise, tripod floor lamps offer the mid-century appeal created by the sophisticated Scandinavian designs of the 1960′s.

Industrial Lighting Fixtures

 Jewel Toned Accents

Last year, decorating in pastel shades of pink and blue were a common sight in contemporary homes, but jewel tones are now what’s in demand going forward. Look for lighting fixtures in berry hues with accents like scroll-work, chrome or rounded details. Even a lampshade in a rich tone conveys a warmth and romantic element to your surroundings. The best part? You don’t have to purchase large, expensive pieces to achieve this look. Simply add a couple of pretty table lamps to a sofa table to set the baseline for your living room’s theme.

Smart Home Lighting