One of the main stays in Industrial and Commercial Lighting has been the Metal Halide Bulb. It is common in Indoor Fixtures, such as High Bays, Canopy Lights, Garage Lights and Low Bays. It is

So you have a Metal Halide (or even High Pressure Sodium) light, and you want to convert to LED. You’ve done your research, you’ve been inundated with marketing materials that tell you what is the most important thing to consider (coincidentally it probably is something they think is important). And now you are left to make a decision. New or retrofit? What new versus retrofit. We sell both. Our retrofits perform as well if not better than new fixtures, but not all retrofit kits can make that claim. However, if your fixtures are old, leak, and have seen their better days, then by all means replace them. It does not make sense to buy a new fixture that includes a retrofit kit inside of it like some vendors will try and sell you. The engineering of some of the new fixtures are fantastic. However, the real reason you would want to consider retrofitting is because you have a significant investment in fixtures. Why not keep that investment? Retrofitting is extremely cost effective, especially our Look for the DLC Premium Symbol, it’s different than the DLC Standard symbol. And that gives you the quick notification that the light you are looking at is the most efficient.

And why does that matter. It’s simple. It will save you a lot more money. Let me do three comparisons for you. First a retrofit kit designed at 97 lumens per watt to replace a 400W Metal Halide bulb, a second at 102 lumens per watt and ours at 155 lumens per watt. Lets keep everything else the same. Cost of electricity, hours of use. The only thing different you will notice is the watts consumed and the lumens produced. For the record, our retrofit kit uses the least amount of energy in this test BUT also produces the most amount of light. We will use 12 hours a day operating time and .12 kw.h electricity cost

Calculation 1: 97 lumens per watt retrofit head, 135 watts, 13164 lumens

Savings per fixture per year over 400 watt Metal Halide: $170.82

Calculation 2: 102 lumens per watt retrofit head, 143 watts, 14600 lumens

Savings per fixture per year over 400 watt Metal Halide: $166.62

OK, so between the competitor options, you are neck and neck, the difference is so minimal you can make your decision based on whose website you like more

Calculation 3: 155 lumens per watt retrofit head, 100 watts, 15,776 lumens (this is our LED Retrofit Kit)

Savings per fixture per year over 400 watt Metal Halide: $189.22

So there is clearly a $18.40 savings over the first LED retrofit option and a $22.60 savings per fixture over the second LED Retrofit option. And, we produce more light!

We have 3 mini LED Retrofit Kits, 30W, 45W and 60W designed to replace up to 250W Metal Halide. We have 3 standard sized retrofit kits, 75W, 100W and 120W designed to replace from 250 Watt to 400 Watt Metal Halide. We have 2 Large Retrofit Kits, 150W and 200W, designed to provide more light than a 400W Metal Halide up to 750W Metal Halide. And we have 3 Extra Large retrofit kits, 280W, 320W and 350W, designed to replace 1000W Metal Halide.

As a homeowner, you face loads of trials and tribulations. Home maintenance, jobs, relationships, and plenty more! Life is rough enough without adding the uninvited members of the animal kingdom into your home, and when you find a chewed wire, you’ve unfortunately got just that! But, hey, don’t stress. The experts at Kolb Electric are here to help!

Why do rodents chew on the wiring in my home?

Rodent teeth are very capable of doing serious harm to your wiring. Why do they even chew on wires? Well, interesting fact, that. A rodent’s front teeth never finish growing, so they chew on anything around to control the length of their incisors. Cool fact, but bad news for your wiring!

Rodents chewing on electrical wires can bring you a world of frustration at the minimum, but can be a source of serious harm at worst! An infestation left unchecked can cause:

Well, traps are always an option, of course. But that remedy tends to be a little unreliable. The unfortunate fact is there’s no magical remedy here. There’s no magical rodent-proof wire coating, or specially crafted mouse vacuum. It really comes down to prevention, and failing that, quick action. To prevent a rodent incursion:

What do I do if I already have a rodent problem?

Call a pest-control specialists right away. It’s frustrating, and costs money you didn’t want to spend, but with each passing week you run the risk of paying more than a few lost cracker crumbs. Rodents chewing on electrical wires is no joke, and left unaddressed will leave you in a bad way, electrically speaking.

Once the nests have been handled, call on an electric professional (like us!) to inspect wiring as soon as possible. Damaged wiring can be caught and fixed before you end up with a real costly problem on your hands.

If things don’t go your way and you end up with some damaged wiring, don’t stress! The experts at Kolb would love nothing more than to assist, bringing you the expertise and service you need to set your wiring right again. Contact us today to learn more about our repair and installation services, or to set an appointment!

7.  Convert the extra closet into a sewing/hobby center.  Install a custom-cut countertop and a little task light… “Viola!” You are done.

8.  Or, maybe you are not done….Why not literally “Knock Her Socks Off” and build her a bigger closet?!

Whether you are building a new closet or updating an existing one, there are specific rules for lighting an enclosed closet space.  The National Fire Protection Association’s National Electrical Code (NEC) sets standards for safety:

Because closets contain flammable material with limited ventilation, strict building codes dictate that specified lighting fixtures must be installed 18” to 24” from walls depending upon which lamp source is being used.  Surface mounted and recessed fixtures must allow for 6”-12” of clearance from any storage space, such as shelving or clothing rods.

♦Of course,these standards are not a problem for Mariah Carey whose closet is as big as a bedroom!

One of the latest changes to the NEC code is the addition of LED (light-emitting diode) fixtures.  LED lighting may cost a bit more, but energy-savings, greater illumination and safety features will prove to be well worth the investment over time.  The quality and adaptability of newer LED lighting makes it an excellent choice for closets and dressing rooms.

9.  Don’t leave Mom in the dark!  Create a cozy corner with a new den floor lamp so she may relax and read, while you watch the ball game! Try a lamp with full-spectrum lighting to elevate her spirits.

10.  Reward yourself:  Clean out the garage and carve out a space for a workshop that is all your own!

People are investing more into floor covering, cabinetry and shelving to make the most of their garage space.    Fluorescent fixtures, track lighting and simple portable lamps are making their way into upgraded organized garage systems.

To Tampa residents, power outages are nothing new. We’ve dealt with all kinds of crazy storms and annoying weather in our time here, and it can be quite flustering if you’re not sure how to handle things. But if you’re prepared and know what to do, an outage can become little more than brief annoyance. Find out what to do during an outage with the help of the experts at Hoffman Electrical!