It’s incredible the way lighting can change outdoor spaces. As is the case with indoor spaces, spending comparatively little on lighting can produce dramatic results. A DIY outdoor lighting project might be just the thing to make you fall in love with your home all over again. But before you begin an outdoor lighting project, it’s important to think about your options. Here are 10 tips for 10 approaches to outdoor lighting.

1. Using Outdoor String Lights

Outdoor string lights are just great. But there are so many different kinds! Some have bare bulbs; some have lanterns. Some are LED; some incandescent. Some are white; some are colored. Make sure you research your options and choose the ones that are right for YOU!

2. Taking DIY Outdoor Lighting to the Next Level

Sure, you can install a standard low voltage lighting fixture and be justified when you say you Did It Yourself, but have you ever considered making your own DIY outdoor lighting fixtures? Mason jars seem to be the ingredient of choice when constructing your own outdoor lights. The internet is full of instructions for making DIY outdoor lighting fixtures, so do your homework and find the perfect project to make your outdoor area more luminous.

3 . Making it Modern

Let’s get weird! Isn’t that what modern outdoor lighting seems to say? I guess it depends on whom you ask. Modern outdoor lighting usually consists of interesting light fixtures with unusual, playful designs, and they can really make your outdoor vibe more interesting and thought-provoking.

4. Showing Off Textures

Sometimes you start with a particular light source in mind. These days, that light source is often LED. If you’re sure you want to use outdoor LED lights, you have a wide variety of outdoor LED light fixture types, from LED rope to LED tape to LED path lights, step lights, puck lights, recessed lights, and string lights. LED outdoor lights are highly efficient and look great. And some, like the one above, run on solar power! That means free!

8. Decking Out the Deck

If you are focused specifically on outdoor deck lighting, make sure you think about caution. Outdoor deck lighting should entail step lights if there are steps and should include lights around the perimeter of the deck. LED tape or rope, colored or white, are often great for running on the underside of deck railings.

9. Using Timers

In all likelihood, the electrical panel is something you’re familiar with, especially if you have an older home with older wiring. When something stops working in your home, like the refrigerator, it’s often the first thing you check.

But if you find yourself running to the electrical panel often, it’s probably not a good sign. This is just one of the many indicators that you probably need an upgrade. Here are some others:

If you are remodeling your home, you are likely changing out appliances in the kitchen or adding a few new gadgets. And if your home was designed decades ago, the electrical system was simply not made to handle all of these new systems.

As our electrical needs grow, the electrical service has to change, too. The panel is what is responsible for distributing power throughout your home, and attempting to burden an older panel with a large load of appliances could mean major electrical trouble or even a fire hazard.

Do you find yourself resetting one or more circuit breakers all too frequently? Do your lights flicker as soon as you turn on the AC or hot tub? This type of electrical trouble could signal a big problem. Call an electrician to inspect your wiring and your circuit breaker box, and make an upgrade ASAP if this is seen as the best course of action.

Finally, it may be time for an upgrade simply because you have an older panel. If you still have a fuse box, and you need to replace a fuse every time you have electrical trouble, it’s not worth it. A new circuit breaker can replace your fuse box and will be a lot easier to use, and safer too.

Besides, some older panels, even those controlled with circuit breakers, are dangerous. Federal Pacific Electric panels, for example, were widely installed in the middle of the 20th century, but it turns out that most do not trip properly a large percentage of the time, presenting a fire hazard.

5-pin SPDT (single pole, double throw) automotive relay.

Relays are essentially two parts in one package. The first part is an inductive coil (pins 85 and 86). This coil is the “trigger” function of the relay. By applying both a positive (+) and ground (-) to the contacts, current passes through the coil. When current passes through the coil, a magnetic field is generated and moves the switch (the arrow in the diagram). This is where the second part of the relay comes into play.

The second part of the relay is the “switch.” The switch has three interface contacts—common, normally closed, and normally open. “Normally” refers to the state of the relay not being energized.

While relays can be used for virtually any task, there are some very useful, simple applications for adding LED lighting to a vehicle. Please note that this wiring only pertains to the relay—not the wires in the vehicle. Before interfacing with a wire in a vehicle, always ensure you test the wire with a digital multimeter first to confirm circuit function.

Positive Switching

Positive switching is used for applications where the “trigger” for your switch or circuit is positive. This could be an ignition, brake, or reverse light wire for example.  This could be used for applications such as off-road light bars, work lights, additional brake lights, and other exterior lighting.

Negative Switching

Negative switching is used for applications where the “trigger” for your switch or circuit is negative. Negative triggers are often found in door, hatch, and trunk triggers as well as many interior switches. This could be used for applications such as footwell lighting, truck bed lighting, under-hood lighting, and other interior lighting.

Switch Activated With Ignition Override

This is useful for applications where you want to turn your light on or off with a switch but only want the light to remain on when the car is running or key is in the “ignition” position. The main advantage to this is—even if the switch is left on—the light (or output circuit) will shut off when the key is turned off so that the battery will not be run down.

For technical questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

When considering solar power, most people picture complete independence from traditional electrical utilities by harvesting enough solar energy to provide their home with the amount of electricity it needs to function each day. Many homeowners look into this, only to discover that this large of an undertaking and the cost of solar panels is beyond their means. Rather than looking further, this is the point that most people give up and move on to something else. Fortunately, there are a variety of affordable solar options that can get you started without the need of a large solar array.

If you have considered solar power, but believe it may be too expensive for you, take some time to browse the solar panel info site at. We specialize in solar leasing and other affordable ways to add solar panels to almost any home.(Read More)