One of the main stays in Industrial and Commercial Lighting has been the Metal Halide Bulb. It is common in Indoor Fixtures, such as High Bays, Canopy Lights, Garage Lights and Low Bays. It is

So you have a Metal Halide (or even High Pressure Sodium) light, and you want to convert to LED. You’ve done your research, you’ve been inundated with marketing materials that tell you what is the most important thing to consider (coincidentally it probably is something they think is important). And now you are left to make a decision. New or retrofit? What new versus retrofit. We sell both. Our retrofits perform as well if not better than new fixtures, but not all retrofit kits can make that claim. However, if your fixtures are old, leak, and have seen their better days, then by all means replace them. It does not make sense to buy a new fixture that includes a retrofit kit inside of it like some vendors will try and sell you. The engineering of some of the new fixtures are fantastic. However, the real reason you would want to consider retrofitting is because you have a significant investment in fixtures. Why not keep that investment? Retrofitting is extremely cost effective, especially our Look for the DLC Premium Symbol, it’s different than the DLC Standard symbol. And that gives you the quick notification that the light you are looking at is the most efficient.

And why does that matter. It’s simple. It will save you a lot more money. Let me do three comparisons for you. First a retrofit kit designed at 97 lumens per watt to replace a 400W Metal Halide bulb, a second at 102 lumens per watt and ours at 155 lumens per watt. Lets keep everything else the same. Cost of electricity, hours of use. The only thing different you will notice is the watts consumed and the lumens produced. For the record, our retrofit kit uses the least amount of energy in this test BUT also produces the most amount of light. We will use 12 hours a day operating time and .12 kw.h electricity cost

Calculation 1: 97 lumens per watt retrofit head, 135 watts, 13164 lumens

Savings per fixture per year over 400 watt Metal Halide: $170.82

Calculation 2: 102 lumens per watt retrofit head, 143 watts, 14600 lumens

Savings per fixture per year over 400 watt Metal Halide: $166.62

OK, so between the competitor options, you are neck and neck, the difference is so minimal you can make your decision based on whose website you like more

Calculation 3: 155 lumens per watt retrofit head, 100 watts, 15,776 lumens (this is our LED Retrofit Kit)

Savings per fixture per year over 400 watt Metal Halide: $189.22

So there is clearly a $18.40 savings over the first LED retrofit option and a $22.60 savings per fixture over the second LED Retrofit option. And, we produce more light!

We have 3 mini LED Retrofit Kits, 30W, 45W and 60W designed to replace up to 250W Metal Halide. We have 3 standard sized retrofit kits, 75W, 100W and 120W designed to replace from 250 Watt to 400 Watt Metal Halide. We have 2 Large Retrofit Kits, 150W and 200W, designed to provide more light than a 400W Metal Halide up to 750W Metal Halide. And we have 3 Extra Large retrofit kits, 280W, 320W and 350W, designed to replace 1000W Metal Halide.

Using a warm white or RGB COB (chips-on-board) LED, these flood lights emit up to 1,000 lumens of illumination in a wide 120-degree beam pattern. The weatherproof LED fixtures have a low-profile die cast aluminum housing with an integral heat sink and a tempered glass lens. An adjustable mounting bracket is also included to direct illumination where it’s needed.

Legrand has been operating in the U.S. since 1984 and continues to bring its unique products to the American market. In addition to a luxury look, the brand offers many useful features and benefits to your home. From innovative gesture recognition to cross-compatibility with different bulb types,

Traditional lighting offers few options for adjusting light levels from room to room or regulating how much energy your lights use. Legrand addresses this problem with its innovative designs and technology, providing switches and dimmers with unprecedented options for control. Instead of flipping a switch, you might tap a console, press a rocker or toggle or simply wave your hand in front of a panel to turn lights on and off. Each fixture is designed to be as flush with the wall as possible, creating a clean look in any room.

Legrand dimmers come in six designs, each with its own combination of switch and dimmer controls:

The media room is perhaps the most lived-in area of your home.  Whether you are watching TV or reading a book, the lighting should be comfortable, energy-efficient and beautifying.  Tune in to a picture-perfect setting with lighting tips from Capitol Lighting’s professional consultants.

1. Track and Recessed:  General or ambient lighting is a must in any room, but it is especially important in a multi-functional space such as a den or media room where there will be a wide range of activities that call for specific light settings.  Overhead lighting should be installed as part of the initial room design.   Oftentimes, a standard grid lighting pattern does not work well with your seating and furniture layout, so it is best to draw up your lighting design in the initial stages of planning.

NOTE:  In general, recessed cans should be installed 30 inches away from the wall and 4-5 feet apart.

Track heads, recessed and/or rail lights should be strategically located so as not to create glare or cast unflattering shadows upon individuals in the room.

Rail lighting from WAC Lighting highlights artwork;  hanging pendants provide soft ambient illumination and artistic accent light.  Rail and track lighting are highly versatile and allow for easy adjustments if you decide to change your decor.

2. Wall Lighting: Wall lights work well in a media room as they expand the space and provide an evenly distributed balanced illumination.

Image from HGTV.com “Must-see Media Rooms”

“Jaxon” wall lighting from Troy Lighting, available in a variety of color options

3.  Portables:  From sturdy reading lamps to decorative table lamps, portables are a useful addition to the multifunctional media room.  They provide individualized task light, as well as general illumination throughout the room.

Room design by Sandra D’Amata International

Ambience table lamp (shown above), Frederick Cooper “Script Reader” floor lamp and Minka-Aire’s “Great Room” fan from Capitol Lighting

4. Control Systems:  Dimming and automated control systems are a must for the media room.  Even if you have programmed your lighting controls into your Smart phone, wall switches with a variety of room settings and dimming capabilities are a good idea and are available in a choice of colors to complement your rooms’s decor.

Dimmer switch from Kichler Lighting

5. Special Considerations:  LED bulbs and LED light fixtures are suitable for media room lighting designs, just be careful to choose all your light sources with the correct color rendering, color temperature and shielding. Look for LED light sources that are dimmable and in warm (2700K)  color temperatures. *

LED torchiere floor lamp from Holtkotter

* Solid State Lighting and LED light sources are being refined so that predictable color rendering and color temperature will be more visually accurate.  A new metric to measure LED illumination is in the works:  The Color Quality Scale (CQS) will help to identify the visual characteristics of LED light sources more clearly, but right now–a bit of trial and error may help you find LED light sources that are complementary to your media room’s decor.

3 Keys to Remember:

*  Avoid having sharp areas of contrast between dark and light–illumination should be evenly dispersed with slight variations that allow your eyes to transition from reading a book, conversing with friends or watching  TV.

* Make sure lighting/fan controls are easily accessible–opt for a remote control system in addition to wall switches.

* Go for the most energy-efficient light sources, but do not sacrifice the overall look of your room.   If you are not using fluorescent or LED light sources, opt for eco-halogen or top quality incandescent bulbs in portable light sources.

“I want to be thoroughly used up when I die, for the harder I work, the more I live.  I rejoice in life for its own sake.  Life is no brief candle to me.  It is a sort of splendid torch which I have got hold of for the moment, and I want to make it burn as brightly as possible before handing it on to future generations.”-George Bernard Shaw  This quote is one by which Hy Goldman lives.

Whether by association to the torch and the carrying of light, these words are powerful and reminiscent of a work ethic that elevates life to divine heights.

Hy Goldman celebrates his birthday at Benvenuti Ristorante in East Hanover. Pictured here with treasured friend, Gloria Schwartz, grand-daughter of the late Ethel Lebersfeld.  Ethel Lebersfeld hired Hy on June 1, 1941.  He has worked for Capitol Lighting ever since.

In this day and age of the perpetual search for an easier life, more leisure time and the latest frivolity, we hold dear to the depth of character and bright quality of a life that continues to sustain a great worker and humble man who lights up our lives.

Hy Goldman celebrates family and an outstanding career.  He said he will retire on his 100th birthday this Saturday August 17, 2013, but time will tell!  We intend to keep him shining brighter than a Capitol chandelier.

Hy with Donna Costello, a recently “retired” Capitol Lighting star.   Donna Costello remains close in spirit to all who have been blessed to work with her.

Hy Goldman celebrates with friends and family.  Pictured with Adele Lebersfeld (standing), Max Lebersfeld (standing), Moya Goldman and  Stanley Goldman.

His family, son Stanley and daughter-in-law Moya, say that “Hy” is stubborn.  He stubbornly holds unto the values that keep him strong, and this may be the key to his longevity.  He wastes nothing and appreciates everything. “Every day is a gift,” he says with a smile and a quiet graciousness that uplifts the spirits of all who come to greet him.

Hy with Carol Saggiammo.  Carol recently celebrated her outstanding career with Capitol Lighting, and she is still going strong.

Governor Chris Christie officially acknowledges Herman “Hy” Goldman’s 100th birthday…

Hy Goldman at work:

He may be moving a bit slower than when he was 20, but he is at the top of his game in creativity and spirit!

Check out the latest “Hy Original Re-creations”…

A stunning crystal lamp brilliantly designed and reworked and wired into a magnificent one-of-a-kind piece.

The Tree of Light and Glass.  He has customers, as well as co-workers competing for his original works of art.