Being the owner of a plant is a big responsibility and it is very important to keep your equipment in working condition. You need to remember that all your maintenance must be planned in an efficient way for both economic and energy efficiency.

Usually when you choose to partake in your routine maintenance, it may cause a delay in your production resulting in loss of income. All safety electrical equipment that is used on a continuous basis will require a lot more maintenance than your equipment that is used rarely, although they will still need to be maintained.

Even though you may maintain your equipment on a regular basis there will be times that your equipment could break. You will then need to take all costs into consideration before deciding whether you should repair the equipment or to just replace it completely.

To help you decide, you should analyze what you have already spent on the equipment as well as what it will cost to maintain it in the future. Once you have done that you should compare it to what it would cost you to acquire newer equipment that may cost less to maintain.

You could also hire a specialist that could create a breakdown of important factors such as the probability of the following:

To run a successful plant you will also need to keep the following important steps in mind:

As energy costs continue to climb, and many people become more concern with their overall impact on the environment, solar power has become a serious consideration for more homeowners than ever before. When choosing to have solar installers install solar panels on your home, one of the first things that you need to do is get a good estimate of your home’s average energy usage. You can then work closely with your installer to determine the size of solar power system that works best for your home.

Gather Your InformationThe easiest way to get an estimate for your home’s average energy consumption is to gather your electric bills for the last year. You can then add all of the kilowatt-hours (kWh) that you used each month and divide this number by 12. This will give you the average number of kWh that you used each month. You can then divide this number by 30 to get a daily usage estimate. Because the average number of peak sun hours in the United States is 5 hours, you can divide this daily estimate by 5 to get an idea of how much electricity your system will need to generate each day during these peak sun hours.

Naturally, the number that you arrive to by this process is only an estimate. The cost of solar panels depends largely on the size of the system that you install. The estimate that you create will give you and your solar installers a good place to start when it comes to determining the size of your solar power system. If you are looking for more information about solar panels, the installation process, purchase and finance options, take a look at the rest of the information that we have available here at Solar Panel Info.

Under-Cabinet LED Lighting Kit is available for purchase that contains a plug-and-play LED light strip, push-button dimmer, remote, 12V power supply, and connection accessories. If you want to build a custom kit, follow the steps below the diagram to ensure that you get everything you need.

3. Select a dimmer or controller

For single-color LED strip light setup

Select the power supply large enough to operate the amount of LED strip light you need to use. If you want to control the brightness of your light strips, you will need a Single-color dimmer shown installed with a non-dimmable power supply

For color-changing LED strip light setup

Follow the instructions above for the single-color light strip setup. However, instead of a dimmer, use a RGB color-changing light strip installation

4. Use an LED amplifier for long runs of strip

Depending on the strip chosen and its maximum run (the number of strips that can be installed consecutively before needing amplifiers), you will need to install an light strip interconnect cables. It is best to purchase a length of strip that is more than your application requires. For example, if your project requires 8 1/2 feet of strip, we recommend purchasing 9 feet of strip to ensure that you have everything covered.

By: Jason Lee

Ever look at old family photos? You remember, the faded picture with the brown couch, wood panel walls and yellow(ish) shag carpet. Most people look at the photo and see these things and the smiling faces of the family. We look at these photos and are taken back to a time when another generation set the rules.

But looking a little more closely at the photo of years gone by, you might notice something that is still around the old house and room today. Hidden in the photo, but still prominent in the room where the photo was taken, is that old, painted over two prong outlet. You know the one. It had the gaudy horse-carved table lamp plugged into it. At one time it was white but it was painted to match the wall color when the paneling came down and the sheet rock went up. You changed the entire look and feel of the living room over the years but that outlet stayed the same. And, why not? It only served one function and how often does technology change, right?

The two prong outlets had been the norm for so long and years of remodeling and redecorating never seemed to affect the outlets. No upgrades were required. Just slap a new cover on it and it was good to go. When “new technology” came about, we were ready with the “cheater” outlet that still enabled us to use three prong electronics with the old two prong outlets.

But soon everything seemed to require three prong outlets and that left us having an abundance of those grey three-to-two prong adaptors in our junk drawer.

Old photos are great to look at and reminisce about past times. But, we are constantly changing and our technology is expanding at a rapid rate. Modern times call for modern outlets. Two prong outlets had a good run and they served a valuable purpose, but there comes a day when the grandfather, who led the head of the family for years, has to retire and give way to change and a new way of doing things.

Outlet changes should be made because today’s outlets give us piece of mind, safety and convenience. Safety has been a top priority for new outlet designs. All modern homes, those built after 2008, should have child-proof outlets installed.

Today’s modern three prong outlets come with a variety of features for convenience and safety. Although the days of the two-prong outlet are numbered, modern GFCI, child-proof and combination outlets will never forget their roots.

One of the easiest ways to increase your home’s security and beauty is to install outdoor lighting. By combining beautiful outdoor lights with your home’s landscaping, you can increase the value of your home while creating a gorgeous outdoor area that you can enjoy at any time of the day. But what outdoor lights are the best? Let the electrical experts at Kolb Electric help.

Like everything, it depends on what you’re looking for with your outdoor lighting. Do you want security for your home, or landscaping? These questions will point you toward not only what style lights you need, but how bright your lights should be.

When you choose to use outdoor lighting for security, you can go in two different directions. You can either:

If you’re choosing to install outdoor lighting for landscaping purposes, it’s important to keep these few things in mind:

Kolb Electric offers outdoor lighting that will increase your home’s:

Beauty – landscape lighting can be used to showcase interesting features in your home’s architecture or your yard! At Kolb Electric, we can design and install outdoor lighting that will illuminate and call attention to your landscape at night. Landscape lighting is a fully customizable way to improve the look of your house after the sun goes down, particularly if you enjoy entertaining or you want to improve your home’s curb appeal.

Security – dark spots in and around your yard can be dangerous, particularly if they are around entry points into your home. With low-voltage landscape lighting, you can shine a light on potential problem areas in your home and deter intruders late at night!

Safety – in addition to keeping your home safe from intruders, low-voltage outdoor lighting can make walking around your yard safer. It can be used to light up stairways, paths, etc. to prevent tripping and injuries.