Do you find energy conservation confusing? You're not alone. According to a recent study, Americans are by-and-large misinformed about what household appliances consume the most electricity. As a result, homeowners who wish to cut down on the energy they use in their home electrical work might find themselves spending time and resources to improve efficiency in areas where they won't see big gains. Read on to learn more about where most of our energy goes and how you can get the biggest payback for your conservation efforts.

The Failings of Cognitive Accessibility

In general, Americans tend to overestimate the amount of power that is devoted to common home devices like computers, television and lighting, while underestimating the amount of energy that is consumed by bigger ticket items like heat, air conditioning and hot water heating. That's because we confuse the amount of time we spend actively using a specific device with how much power it uses.

“Consumers tend to use the frequency with which they think or interact with a given energy source as a proxy for its consumption,” Ohio State University psychology doctoral student Dan Schley, lead author of the study, said to the Washington Post. For example, someone who spends eight hours a day working on a computer might naturally be inclined to think that device is what's driving up the electricity bill.

How to Make Your Actions Count

However, it turns out that the energy consumed by common electronics is dwarfed by what goes into major appliances. According to the U.S. Department of Energy, a whopping 48 percent of energy in the average home goes toward heating and air conditioning. The hot water heater takes the next largest individual chunk, at 17.7 percent. The refrigerator uses 13.7 percent, with all other appliances and electronics accounting for about 21 percent of the total.

The upshot? If you really want to cut back on consumption in your home electrical work, you need to target the biggest guzzlers. That means making interventions like installing smart thermostats, turning down your water heater temperature and beefing up the insulation in your home. The simplest, most effective change that most families can make is to bump the thermostat down a few degrees in the winter and up a few degrees in the summer.

Don't Neglect the Small Stuff

That's not to say you should ignore simple behavioral changes that can save money in other areas of your home electrical work – things like unplugging devices when they aren't in use, installing energy efficient cable boxes, using the power-saving settings on your computer and turning off the lights when you aren't in the room. Just treat these items as the appetizers and desserts of your energy-saving strategy, rather than the main course.

If you need help identifying the largest loads on your home electrical work, arrange for a visit from an expert electrician today.

Our hope is for Light Reading to be a place you can come for inspiration and guidance as you plan your next lighting project.

The thing is, we are incredibly inspired by our readers!  Your kind words, and contributions to “11 Beautiful Photos of Under Cabinet Lighting”

11 Beautiful Photos of Under Cabinet Lighting: This one definitely falls under the “inspiration” category, but it can also be helpful if you’re trying to determine what type of under cabinet lighting is your favorite for the kitchen. Puck? Linear? LED? Fluorescent? Be prepared to gaze at dreamy kitchens. “How To Have Great Lighting In a Rental”

Here’s How To Map Out Your Recessed Lights (An Infographic): Those who decide to add recessed lighting to a new or existing home are presented with a seemingly impossible task – laying them out on a blueprint. This infographic will clue you in on what every lighting designer knows about recessed lighting placement. You’ll be ready to install in no time. Read More >>

Although LED T8s have not been around long enough to produce a thick memoir, there are some interesting things to note about why they exist.  A few years ago, there was concern that the rare earth metals used in fluorescent tube lamps might start getting significantly more expensive for the U.S. to purchase from China. Light bulb manufacturers began an arms race to develop an affordable and effective LED T8 replacement tube.

A sustained sharp increase in the price of phosphors never really happened. And so LED T8s have gained momentum in their evolution, organically evolving to better perform well in certain applications. Their price point has decreased, and their performance has gone up. And now, LED T8 linear lamps are certified by the DesignLights Consortium to be high quality, high efficiency lighting products.

However, LED T8s continue to be very controversial – even divisive – in the lighting world. Many people think they’re great; but some people think their existence is entirely unnecessary. Both sides of this argument tend to contextualize their visions of the merits and pitfalls of the LED T8 in a comparison with the merits and pitfalls of the traditional fluorescent T8 tube light.

LED T8 Linear Light Bulbs vs. Fluorescent T8 Linear Light Bulbs

First of all, the merits of fluorescent T8s cannot be overstated. Fluorescent tube lamp technology has been developed over decades and is now basically mastered. Fluorescent T8s are extremely inexpensive and have ridiculously long rated lives. In fact, in some cases, fluorescent T8s can last as long as LED T8s!

And it doesn’t stop there. The production of light with fluorescent tube lamp technology works really, really well. It is probably at its peak in terms of performance and cost. Fluorescent T8 light bulbs can last 50,000 hours. And despite their not-always-positive reputation for rendering color, fluorescent T8s can achieve high color rendering indexes (CRIs). But, it must be clearly noted, fluorescent T8s get more expensive as you seek a higher CRI.

And in terms of cost, let’s just say it straight: In many applications, the LED T8 tube light’s initial cost doesn’t make sense when compared to the relatively low cost of fluorescent T8s.  For example, at this stage of the game (June 2014), lighting large spaces like classrooms or large offices is job better performed by fluorescent T8s than LED. First, there’s the cost. Fluorescent tube lamps last long, cost little, and give off crisp light. Furthermore, fluorescent tubes give off light omnidirectionally, casting light upwards toward the ceiling as well as downward. This makes a space look more fully lighted. LEDs, in contrast, are generally more unidirectional and cast light downward only. This is something that will change, but, currently, this is just affirmation of the fact that fluorescent T8s reign supreme for some applications.

Fluorescent T8s often take a while to come on; they’re adversely affected by temperature (and somewhat sensitive about it); they can flicker often; and if the lights are turned on and off frequently, as in laundry room or bathroom applications, for example, they can fail quite prematurely, to the dismay and annoyance of everyone involved. And then there’s that toxic mercury vapor which poses danger to humans and the soil on which we live.

Oh yeah, fluorescent tube lamps require a ballast, too: A component that will also, eventually, fail.

Now, let’s give some attention to LED T8 tube lamps. It should first be noted that LED T8s have a higher initial cost than fluorescent T8s, which can be purchased for only a few dollars in some cases.

Despite their higher cost, LED tube lights have some nice advantages. First of all, LEDs love the cold, so they are great in cold weather applications, unlike fluorescent T8s, which become seemingly infirm in the cold, slow to turn on and flickerish. Basements, sheds, garages, porticos, covered pathways, bathrooms, etc, are great places to utilize the LED T8 linear lamp.

You also have to consider that if an LED T8 tube breaks, it will not release harmful mercury vapor into the air. Mercury from fluorescent tubes can get into the air but also the water supply, which is why you have to recycle them. For some people, the whole mercury thing is enough to open their minds to alternatives to the long-reigning fluorescent T8.

Plus, you can get better color rendering with LEDs than with fluorescent lights. Fluorescent lights work by transforming ultraviolet radiation into visible light. If you have a vague idea about what UV light is, you know that it’s the part of the light spectrum that’s just past the blue and violet area. Even with a rudimentary understanding of light, then, it’s easy to see how the result of transforming UV light into visible light would leave you with a bluish result. As a result, in general, fluorescent lights do not render reds well.

LEDs exude very little to no UV or infrared radiation, both of which fade the color of displayed objects including wall art, furniture, and even rugs. Fluorescent tubes – did you know this? – do indeed fade sensitive belongings over time.

Finally, LED tubes do not generally require a separate power supply. They run on line voltage and require no separate drivers, ballasts, or transformers. That’s one less thing that can break. In conclusion, LED T8s are more expensive than fluorescent T8s, but LEDs are safer, render color better, require no ballasts, operate better in the cold, and do not decline significantly in lifespan due to frequently switching on and off. This means that there are some applications, like cold places, bathrooms, basements, laundry rooms, kitchens, closets, storage rooms, walk in refrigerators or freezers, or places where there’s a risk of broken light bulbs like gyms, warehouses, etc, for which LED T8s might be the better choice. And since LED T8s don’t weaken with frequent switching on and off, they are great for use with occupancy sensors.

If You Do, We’ve Got The Cure!

We’re Custom Electrical Services, experts and experienced at “finishing up” those do-it-yourself or handyman projects that didn’t quite turn out the way you’d hoped.

Don’t get me wrong.  I understand the motivation for wanting to do it yourself or have a handyman friend hang a ceiling fan, move a chandelier or add an outlet.  You were probably trying to save money and avoid the aggravation of finding a reputable electrician who’ll show up on time, do the job on the first trip and do if for the price quoted!

But now your stuck.  The fan is wobbling.  The outlet doesn’t work.  The chandelier project is half done or maybe never got started because you didn’t have the right tools or parts.

Have no fear!

Call 515-669-3418.  My technicians are trained professionals experienced at “stepping in” and finish up electrical projects, large and small, to your complete satisfaction.  And you’ll be relieved to know:

So, don’t despair!  The cure for your projects hangover is one call away.

Categories: Residential« Ceiling Fan Winner!  |  Attention Homeowners: Do you know… »