Handing over the responsibility of planning the layout of your home to the builder can be a huge relief. However, by doing so, you are leaving the builder with a hazy idea about your requirements. And this matters a lot especially in the case of electrical and lighting layouts.

The electrical and lighting plans of your home are as important as all the other plans. So before commencing the construction, consider adding these 6 essential points in the layout.

Follow this simple rule for every room and space in and around your house. Start with the functionality of that room or space. Next decide on the configuration of furniture in that area. And then, draft the lighting and electrical layout accordingly. In this way, you will not over-light or under-light any portion of your home.

Also, you can either consult an expert or do an in-depth research about the current lighting trends in the market. No matter how much you love a certain lighting trend, if it’s outdated, there’s a good chance that it won’t complement the current design elements of your house.

Security, lighting, cooling, heating – there are multiple control panels which you may find essential for your home. So decide on the specific types and number of these panels early. Doing so will help you mark their exact and convenient locations, in the layout itself, and save you a lot of hassles later.

These are the kind of electrical elements which most of the people would want to keep out of their sight. But, that might not be a practical thing to do in some of the cases. For your bathrooms, you might want to hide the power points inside the cabinets. However, when you need to use your hair dryer, you will have to keep the door of the cabinet open. And if it is a face cabinet, you won’t be able to use the mirror. Small things like this make a huge difference to your routine activities. For art aficionados, imagine the dismay of seeing a power point right next to their prized possession of a famous work of art. Hence, it would be wise to decide and ink in the places for power points in the electrical layout itself.

Imagine opening your garage door and fumbling your way to the switch board to turn on the lights. And, the irritation your guests might face while trying to figure out the correct switch required. Exactly the reason, why you should think of automated lighting. And as for the switches, you can replace them with customized images of pantry, garage, laundry etc. This kind of detailing goes a long way in making your life more convenient and your home more comfortable for your family and guests.

Outdoor spaces of homes have today become an intrinsic part of their inhabitant’s social lives. If this holds true for you as well, you should definitely factor in illumination of areas such as decks, patios, pools etc., in the electrical and lighting layout. An ideal choice would be weather proof electrical outlets. Whether you want to accent foliage, light a pathway, overhead lighting and ground-level outlets for the swimming pool, it is essential that you chalk in all of your needs in the electrical and lighting plans.

Documenting the placements of electrical and lighting elements is a must. Be it written plans and drawings, or photographs. These records will save you a lot of trouble in future, when you need to do any type of renovation or even repairs.

All the above mentioned aspects will help you plan every small and big electrical and lighting aspect of your home effectively. So save yourself a lot of trouble and unnecessary expenses which might arise in future, if you don’t plan the electrical and lighting aspects of your home at the design stage itself.

Cities like Colorado Springs, Denver, and Pueblo are constantly expanding and urbanizing—you can always spot a new neighborhood development on your commute to work. New homes are sprouting up all the time, and people are buying. However, sometimes new isn’t always better (or cheaper). There are a lot of great, older homes throughout Colorado cities, and are often a better choice when it comes to real-estate investments. If you currently own an older home, or you are considering purchasing an older home, you’re going to want to check for these common electrical problems that could cause issues in the future in terms of both safety and money.

Generally, homes that were built after 1940 are in the clear—they are usually safe and the electrical systems were installed up to code. Homes built prior to the 1940s should be evaluated, however, as many of the electrical wiring could have deteriorated or may not be able to power a home in this era of modern day technology and appliances. Regardless of when your home was built, it might be a good idea to have an electrician come out and evaluate the wiring systems in your home and ensure that your family will be safe. Here are some things that you can look for yourself when it comes to old wiring in old homes:

Old Cables

Metal cased, fabric covered, or frayed wires are signs that your wiring is outdated and unsafe. Many times during the early 1900s, electrical wiring was “protected” by metal jackets or canvas-like cloth, which can cause problems if the insulation in your walls has been damaged or aged, or even if the metal electrical cords were placed on inadequate grounding. If the wires get exposed, or start to fray in these two locations (next to insulation or on top of a poor electrical foundation) this could be a serious fire hazard waiting to happen. You know you need to call an electrician and get your wiring replaced when you can see any scorch marks on switches or outlets, when you see torn, damaged, or missing insulation, or when you see exposed wires that could potentially cause a fire.

ZINSCO and FPE Panels

Zinsco Panels

While popular around the 1970s, Zinsco panels are almost obsolete today. However, older homes can still have these panels as a part of their home’s electrical system. Not every Zinsco panel needs to get replaced, but it would still be a good idea to get it inspected, as these panels have circuit breakers that have been known to melt into the main bus bar and cause a fire.

FPE Panels

Federal Pacific Electric panels were distributed throughout thousands of homes in the 1950s to the 1980s, and have an unfortunate reputation of being extremely hazardous to the safety of you and your home. These panels have been known for their inability to trip the circuit breaker when the circuit is overloaded or short. When the breaker doesn’t trip, it instantly puts your home at a fire risk because the circuit is taking on much more than it can handle and has no way to shut itself off.

If you recognize either two of these logos on your electric panels in your home, call an electrician immediately to get them inspected.

Old Fuse Boxes—Below 100 Amps of Power

Houses built before the late 1940s and early 1950s were not expected to handle the amount of electricity that we use in modern time. That being said, the homes were installed with a circuit box that can only power 60 amp service (four fuses), or sometimes even 30 amp service (two fuses). This means that your older home may not be able to power all of the appliances and electronics that you have in your house. If your breaker is tripping constantly, or your electric bill is through the roof, this may be a sign that your older home needs an electrical inspection to update the amp-service. Older electrical panels are also at risk of starting a fire. If you are unsure whether or not your home is experiencing this, call an electrician to be safe, and they will be able to give their expert opinion on whether or not you need to upgrade your electrical panel in your older house.

These are just a few signals of outdated electrical work in an older home, but each one is a serious risk to the safety of you and your family. If you have an older house, be sure to get it checked out and evaluated for safety. The same goes for those who are looking to buy an older home in the Colorado area, as the electrical work could be outdated and dangerous.

It’s full-on spring, and there seems to be a lot of activity in the landscape lighting world. That’s probably because landscape lighting is generally a great and affordable way to significantly improve the curb appeal of your home. Landscape lighting ideas abound on the internet, and, since it’s a popular season for landscape lights, I thought I would curate for you some of the best landscape lighting I have seen out there on the Web.

1. Wall Grazing at Its Finest

Wall grazing is a lighting technique in which light is cast up or down a wall in order to let the light and shadow play off the wall’s texture. Wall grazing works especially well on this wonderfully textured stone wall. Interesting walls like this almost demand uplights to play off their texture.

2. Cinematic Pond Beacon Situation

Very bright light on this structure in the middle of a pond creates a dramatic, almost cinematic effect. Bright uplights on the trees give some context to the attractive structure.

3. Variations on a Path

Using different styles of path light can make the walk to the house much more interesting. Never assume it’s law that all your path lights match. Mixing it up a little gives the eye a lot more to look at, and the outdoor lighting design looks more calculated, in a good way. Instead of the string of path lights that come in a pack, this is conscious design that makes every trip to the front door pleasant.

4. Variation on Variations on a Path

Another way you can break the monotony of path lighting is to place your path lights according to the visual features along the path, like plants or garden ornaments. Setting up the path lights to be spaced a little farther apart and placing them in different proximity to the path – now directly on the path, now set back near some interesting plants – leads the eye farther down the path, which creates a spectacle and gives the eye much more to admire.

5. Path Lighting without all the Path Lights

Landscape lighting doesn’t always have to include path lights. Here, adequate illumination and very attractive lighting design is achieved by uplighting trees and using downlights mounted on the house.

6. Moon Lighting: A Supernatural Experience?

Moonlighting is a technique in which lights are hidden higher up in trees to create an ambient effect. Pretty cool!

7. Under Counter Lights

One really cool outdoor lighting effect is under counter lighting. Led rope, tape, or LED tape rope hybrid can be run under the edge of counter, stone wall ledge, bar, island, or bridge to create a wonderful lighting effect. This is one application in which LED landscape lighting works really well.

8. Water + Lighting =  Awesome

What’s cooler than light fixtures giving an almost otherworldly beauty to outdoor water features? This is my personal favorite kind of landscape lighting. It just provides such a reliably relaxing and comfortable atmosphere. If your home is your sanctuary, you might want to consider this one-two-three punch of water, sound, and light.

9. Shadowy Magic

Moonlighting can also be used to create cool shadows on the path. See that light mounted up in that tree? It mimics the light of the moon, creating interesting shadows on the ground and enough ambient light to see where you’re walking. Great lighting design.

10. Lit Up Night Time Oasis

There are a lot of interesting things going on here. The space feels large and luxurious, in part because that uplight at the back draws the eye directly to the back edge of the space, making the whole spread look larger. The path lights around the perimeter draw attention to the landscaping. Of course, the star of this show is the cove lighting used around the bridge, making it look almost as if it is floating on light. Yes to this.

11. Epic Landscape Lighting in a Park

I mean, this pretty much speaks for itself. The high powered uplights illuminating the tall canopy creates an amazing effect. Not only is it beautiful, but it also represents the dual purpose of landscape lighting: To beautify and to make safer. Urban parks can be dangerous, but this one looks even more welcoming at night.