Large factories, refineries, and oil facilities are all industries that require special considerations for their electrical wiring. Heavy-duty applications and hazardous environments must use products built to resist corrosion. Chemicals, rain, snow, wind and other threats damage industrial wiring. As a result, good maintenance and repairs are imperative.

With a properly installed tray system, the next step includes teck cable. This armored cable with an exterior jacket, comes in nearly any combination of conductor sizes, voltages, and cores. Fiber optic, CAT6, and shielded twisted pair cables are available. These are usually color-coded based on their type. Teck cables can be pulled through cable tray, conduits, or buried underground. For buried cable, ensure that it is placed at the appropriate depth, protected by layers of sand, spaced properly, and that buried cable warning tape is conspicuous.

Some clients request protection for buried cables; therefore bricks, concrete slabs, or planks of wood are utilized. Where cables emerge from the ground, they should be protected by a PVC conduit sleeve. Teck cables must be secured to the rungs of the tray using approved Ty-wraps or cable clamps. This not only keeps cables neatly arranged, but reduces the chances of damage.

Once a teck cable has been fed to its destination, it is connected by use of a teck connector. These connectors serve two purposes. The threaded end puts tension on the cable by means of a rubber gasket, which holds the cable securely in place. In addition, a small metal star-ring inside the connector makes contact with the metal armor of the cable, bonding it to the connector. This is why, when preparing a cable for the connector, that 3-4 rings of cable armor are left exposed.

In locations with potentially hazardous or explosive gasses, explosion proof connectors must be used. They have a small internal chamber meant to hold an epoxy sealing compound. This seal contains an explosion in the event of a failure. In addition, it prevents gasses from traveling through the small gaps between wires to potentially non-hazardous locations where arcs and sparks cause harm.

Good working knowledge of industrial wiring applications is essential to ensure safe and reliable installation. Finally, with the use of heavy-duty materials, a facility can expect many years of problem-free service.

Commercial enterprises tend to have a number of heavy-duty appliances and equipment including data processing installations and communications equipment. Hotels and restaurants have various appliances that rely very heavily on electricity too.

When you start looking for a commercial electrician for any scheduled maintenance, a major installation or even any replacement or repair work, you know that you will need a professional that would provide reliable and high-quality electrical services. Here are some tips to hire a commercial electrician in Sydney:

When it comes to electrical work, a poor job can be extremely dangerous to people and property. The commercial electrician you hire should be able to provide services that are in-line with Australian Standards; they should also provide guarantees for their work and this is an indication that they are confident about their own workmanship. Apart from this, you can be assured they will tackle the job in a competent and professional manner.

When any electrical emergency arises, you need to be sure that the company will be able to quickly send out a licensed and insured electrician to your location within the shortest possible time. You also need someone who would be able to meet project deadlines. Any downtime on electricity can have a major impact on the working at a commercial establishment and it impacts their revenue as well. This is why you need to hire professionals that will use the latest technology and complete the job quickly and efficiently.

Only a company that is professional and careful about maintaining its reputation in the field will ensure that every single aspect of their business is in place. They should have well-trained, qualified, licensed and insured commercial electricians on their team. Apart from this, the company should also have the necessary worker’s compensation as well as professional indemnity. They should also ensure that all their personnel undergo regular training; this helps them keep their skills sharp and knowledge current.

Before you decide which commercial electrician you are finally going to hire, it’s a good idea to get quotes from multiple electrical companies. Look for one that will be able to provide you long-term value. It’s not always about hiring one that provides the lowest quote, but they should be able to provide solutions such as energy-efficient installations etc. It’s important that you ask the companies to provide detailed quotes based on your specific requirement; check what’s included or excluded in the quote.

It’s best not to be hasty with making your final decision about a commercial electrician in Sydney. However it’s something you shouldn’t be putting-off to later date either, as you never know when you would urgently need the services of an electrician on your premises. Look for a company that’s local to your area, as that will ensure you get quick and efficient services exactly when you need them.

It’s best to call in an electrician, discuss your electrical requirements and get them to assess what the cost of the various services will be and what kind of preventive electrical maintenance plans they provide. For more information, simply speak with the experts at Allround Electrical and take their advice on various aspects of commercial electrical solutions.

We are extremely professional in our approach to our work and provide customized solutions that are right in line with your needs. The number to call is 1300 169 263. You can also write to us at this email address and we will respond within the shortest possible time.

Thanks for reading,1300 169 263

After the recent long and hot summer, the cool weather of autumn came quite abruptly. It comes as no surprised that homeowners are throwing on additional layers of clothing, and turning up their home thermostats to compensate for the cold temperatures. However, before you touch the thermostat dial, consider the advantages you will have with electrical heating. Higher efficiency, lower maintenance and environmentally friendly – electrical heating is the smart choice for your home, continue reading to find out why.

As there is no need for oil or gas required in electrical heating, there is no combustion, output or waste created when converting electricity to heat. Electricity is 100% renewable so the impact on the environment is much smaller than standard gas or oil heaters. Furthermore, as there is no input in required for electrical heating, the ongoing maintenance is much less. While an electric heater may be a larger initial investment, the cost savings from a reduction in maintenance during the service life is much better.

Electric heating can help you save money every month on your heating costs. In certain situations heating an entire home or building with electricity can cost more as it takes more energy to generate and transmit the heat to the entire building to heat. But where electricity truly shines in focused heating in areas. Rather than heating areas of your home unnecessarily, using smaller electric heaters in the frequented areas of your home leads to much better cost savings.

For example, during the evening you may be spending the majority of your time in the living room and kitchen. Turning up the thermostat would cause your heating system to heat all the rooms of your home that nobody is occupying. Instead, you would turn on your electric baseboard heater in the living room to keep you warm there. You can then turn off the heater when you are leaving the room for bed. This is much more efficient as the heat is targeted to the areas needed most and you are in full control.

Electric Furnaces – An electric furnace would replace your standard gas furnace to heat your entire home. A gas furnace can last 20 – 25 years, while the expected lifespan of an electric furnace is even longer. Because there are more combustible parts in a gas furnace, the maintenance is much higher over the course of its life. This means you will realize more cost savings over the life of an electric furnace.

Electric Baseboard Heaters – Many of you may be familiar with these types of electric heaters. These small boxes are placed just above the floor on the baseboard. They are installed in each room (as desired), and can be controlled individually. When the heat is generated it will rise to the top of the room, in turn the cold air falls and is put through the baseboard heater and the process continues.

If you are looking to make your home more efficient and eco-friendly – electric heating is the right option for you.

The type of in-wall wiring and cables you choose for your home will largely depend on what kind of signal you need to carry, where you’re going to route the wire, and how far the signal will have to travel between your various peripherals. Whatever type of wiring you choose to go with, you want to be sure you get one that’s rated for in-wall use by the Underwriters Laboratory (UL). This is usually going to be indicated with a CL2 or CL3 rating when it comes to speaker wire and audio/video cables. A good number of Ethernet cables are rated for in-wall use as well, usually indicated with a CM, CMR, or CMP rating. When choosing the right rating for each specific type of wiring, the UL looks at a range of different factors, including the heat being generated from current flowing through the wire, how quickly the cable will catch and spread fire when exposed to flame, and the wire’s vulnerability to damage from external stresses.

It is also important to look for a cable that’s rated for your specific needs. For instance, you are going to want cable that is rated as CL2P or CL3P if you are planning to run it in your heating ducts, or if you are looking to run your cable underground to connect to your outdoor speakers, you will want to make sure your cable is rated for direct burial. It should also be noted that when you are making the decision of what custom wiring you will need for your home, you need to be aware of your local fire codes and make your selections accordingly.

When you are looking for the right type of speaker wire for your home, there are two things you need to factor into your decision: the gauge and number of conductors. The gauge of wiring you choose should depend on how far the wire is going to have to travel from the receiver to the speaker. Significant power loss can occur over long runs of wiring, reducing your system’s performance. This might not be a significant issue in a single-room setup, but it is something to keep in mind if you are looking at a multi-room system. In terms of conductors, speaker cable comes with two or four. Two should be all you need for wiring a single speaker, but if you are looking at doing a multi-room setup, or a system with volume controls, you will mostly likely want four.

No home wiring setup would be complete without a solid Ethernet setup, but knowing which type of wiring to use can be a little confusing. When you are looking to create a wired computer network in your home, or carrying audio/video and control signals all across the home, CAT-5 cables have been the standard for a long time, but a better option these days might be to look at CAT-5e or CAT-6 cables. These newer cables are able to pass more data along the wire at a much faster rate than the older wires. The CAT-5e and CAT-6 wiring options are also backwards compatible with devices that were designed to work with the older CAT-5 wiring, meaning you won’t have to buy all new equipment. Ethernet cabling actually stands up to interference better than almost all audio/visual cables, which is a large reason it has become so popular in recent years for whole-house audio/video systems. It can also be a more cost-effective option to run long lengths of Ethernet cabling than it can be to run the same length in audio/video cable.