Modern demands for electricity often exceed what the original builders of your home envisioned. It’s not unusual for older rooms, even kitchens, to have just one or two electric outlets, but that can put an unsafe strain on your wiring system.

In addition, older homes (those 50 years or older) may have outdated aluminum and/or knob and tube wiring. If you frequently trip the circuit breakers in your home and/or notice discoloring around the outlets, this could be a sign that your wiring needs to be replaced. Old wiring is nothing to ignore. More than 26,000 residential fires are caused by electrical system failures each year.

If you suspect the wiring in your home may need updating, you are likely wondering about the cost to rewire a house. According to Angie’s List, the average cost of rewiring a 1,500 to 3,000-square foot home ranges from $8,000 to $15,000. The good news is that this is a one-time expense. Unlike replacing your roof or heating system, it’s extremely unlikely you’ll need to replace the wiring again for as long as you live in the house.

There are many factors that contribute to the cost to rewire a home in the Maryland, Northern Virginia, and Washington, DC areas. They include:

At Kolb Electric, we understand that the cost to rewire a house can be substantial. That’s why we take the time to answer all of your questions and address your concerns before we ever start work on the project. We’ve been helping Maryland, Northern Virginia, and Washington, DC area homeowners with their electrical needs for more than 20 years, and our team of licensed electricians are some of the best and well-trained in the region.

To learn more about rewiring your home and/or to schedule an appointment in the DC area, call us at 877 287-1179.

As a California homeowner, you know that this is not the best time to put your house on the market, which may be why so many people are opting to upgrade their existing homes instead of seeking a replacement. One of the improvements you should consider is an electrical make over.

Electrical wiring can suffer wear and tear, and older homes were simply not built to meet today’s electrical needs, but these deficiencies can be overcome by hiring an experienced electrician. Santa Monica, CA building codes have changed over the years as well, and companies like The Electric Connection that specialize in rewiring older homes can bring your house into compliance with the latest regulations.

If your home was built during the 1960s and 1970s, you may be living in a fire trap. During that time approximately 2 million homes were built or remodeled using aluminum wiring before it was discovered that this type of wiring poses a significant fire hazard. The problem occurs at the electrical connection points where the wiring is spliced to connect to a switch, outlet or circuit breaker. Aluminum expands and shrinks in response to temperature changes, a process which can cause breaks and frays over time. The US Consumer Product and Safety Commission (CPSC) has expressed grave concern over this issue stating that homes with aluminum wiring are up to 50 times more likely to have a fire than homes with copper wiring.

How will you know if you need to have all of the electrical wiring in your house replaced? Fortunately, you may not necessary need a complete rewire in your home or business. A licensed electrician in Santa Monica can evaluate this for you, and tell you to what extent you’ll need to go in order to make your home safe. The Electric Connection, which specializes in house rewires explains that depending on the situation, there might be a fairly inexpensive solution. For example, you may simply need to replace the connection points in your home or business with copper electrical connectors. Not every Santa Monica electrician is trained in this type of retrofit, so you when you’re searching for electrician Santa Monica, it’s important to find a highly trained and fully licensed electrician to perform aluminum-to-copper retrofits.

Older homes, those built prior to 1950, may have a different electrical safety issue. During this time many homes used cloth insulated wiring, something which can appear similar to the insulated wiring used today. The danger builds over time; as the cloth ages it dries and can begin to flake off. Once portions of the wire are exposed, they pose a serious shock and fire danger.

Another challenge presented in older homes or buildings with cloth insulated wiring is that this wiring was frequently not grounded. At the time there were a limited number of electrical appliances and no home computers, so grounding was not considered a serious issue. Today all new homes are grounded so that excess electrical charges caused by electric surges are routed out of the house and into the ground, protecting electronic devices, computers and appliances. An electrician from Santa Monica can replace cloth insulated wiring with a grounded system, making your home and belongings safe from electrical fire and damage caused by power surges.

Another problem with older homes is the lack of three-prong outlets, something that is necessary for most modern appliances. Many homeowners mistakenly think they can simply purchase the three-prong version at the hardware store and swap out their existing two-prong outlets, but doing so can create additional fire risks. Properly swapping out these outlets requires some rewiring so that the three-prong version is grounded. Your Santa Monica electrician can do these quickly and inexpensively for you, and can make certain that any existing three-prong versions have been installed properly.

So how do you determine what type of electrical wiring is in your Santa Monica CA home? The first step is to check the build date. If your home was built before 1950, you can call the Electric Connection for a free electrical estimate by a licensed Santa Monica Electrician. They will be able to quickly evaluate any electrical safety issues that you might have in your home or business electrical system.

On average, over 350,000 home fires take place every year, claiming thousands of lives. How are your smoke detectors functioning? Don't make these mistakes with your smoke detectors:

Make sure your smoke detectors are installed correctly The U.S. Fire Administration recommends installing alarms both inside and outside sleeping areas. At a minimum, alarms should be located on all levels of your home, at least one near each sleeping area and preferably additional detectors in pathways between sleeping areas and exits out of your home. If you sleep with your bedroom door closed, smoke or use heat-producing appliances in or near your bedroom, or have noisy appliances in your bedroom that could block the sound of a smoke detector (TVs, stereos, air conditioners, and more), it is especially important to install one inside each bedroom. Always use a licensed electrician when installing hardwired smoke alarms. Alarms should be installed:

Smoke detectors save lives. Don’t fall victim to these common smoke detector problems or behind today’s recommended standards for protection. Contact Mr. Electric® today to ensure the proper installation and operation of these life-saving safety devices in your home.

If you are looking for a Garland electrician, be sure to find one who cares enough about safety to help determine if your home is up to par. Some older homes often lack basic precautionary features that are inexpensive, yet vital to the safety of the family. One of these features is the GFCI, and any Garland electrician should be able to determine if your home has one.

Recently in Texas, a family experienced a heartbreaking illustration of what can happen without a GFCI. The mother was bathing her two children, ages five and six, when a hairdryer that was plugged into a nearby outlet fell into the tub. Both children were killed by the electrical current passing into the bathwater.

One of the most horrifying things about this story is that this accident was preventable! Installing a Ground Fault Circuit Interrupter, or GFCI, could have saved these children’s lives, at a cost of less than $60. The circuit in their bathroom was not equipped with this simple piece of equipment, simply because their home was an older home.

When the electrical current is imbalanced, it indicates that the current is passing through something that it is not intended to pass through. A GFCI handles that situation by quickly interrupting the flow of current before it can do harm. Water is an especially dangerous conductor of current, so a GFCI should be installed everywhere that an electrical device might be plugged in near water. This means that GFCIs should be on outlets in not only kitchens and bathrooms, but also in garages, outside, near countertops, and near hot tubs and pools. While a layperson might not realize that, an electrician should. That is why, whether you are looking for a Dallas, Garland, or Rowlett electrician, you should make sure to find one with enough experience to spot potential hazards before they cause tragic results.

One of the best Garland electrical teams you will find is the crew at ElectricMan, Inc. Available twenty-four hours a day, seven days a week, ElectricMan’s team is made up of trained electricians who care about the safety of families. To learn more about finding an electrician Garland homeowners can trust, visit the website. For a deeper connection, join the online community on ElectricMan’s social sites, or call (972)792-7270.