In the past several years, the technology behind our lights has grown tremendously. Although incandescent bulbs were the standard for a number of years, more energy efficient alternatives like Compact Fluorescents (CFL) and Light Emitting Diodes (LED) have become more readily available, affordable and very popular. Because people have been looking for ways to reduce their electrical bills, and lower their overall impact on the environment, LED lighting has become a particularly popular alternative as it has become easier to find. This has resulted in LED lighting companies to manufacture and distribute more LED lights than in the past.

Should You Switch?

The reasons to switch to LEDs are numerous for both homeowners and small businesses. One of the biggest draws to LED lights is its lifespan. Most LED lights will burn for somewhere around 100,000 hours. This translates into roughly 11 years. Whenever you are dealing with this type of lifespan, you will probably end up calling an electrician in Los Angeles to come change out the light fixture before you ever have to change the bulb. LEDs not only last longer, but they also use much less electricity than both incandescent and CFL bulbs. They also produce less heat, resulting in a long-lasting, low-energy, low temperature operation.

Are They Expensive?

One of the few negatives that LED bulbs have is that they have a higher up-front cost than many other options. Although they boast the longer life span, reduced energy consumption and low heat, LED lighting is still more expensive than CFL and Incandescent bulbs. For this reason, many people choose other types of bulbs over them.  Those that go with the LEDs typically find out that they will pay for themselves through reduced energy usage. As always, don’t hesitate to contact The Electric Connection with any questions about LEDs, light fixtures or any other electrical topics. We’re always glad to help.

Click here to visit our website.

Fully automated homes offer the ultimate in Smart Home Technology, boasting George Jetson-like advancement once believed to be many years in the future.

Today’s Smart Home Technology offers everything from Wi-Fi home thermostats, to wireless door locks and outlets that can be turned on and off remotely, as well as inform you if your infirm Granny has started her morning pot of coffee. What’s more, the ability to manage outlets, appliances, heating and cooling, and more with the help of the wireless Internet, a smart device, and a few apps is now an affordable reality.

How can you make your home a bit smarter? Mr. Electric® has ways to help you power your tomorrow with these technology options.

Fitting over your existing deadbolt, smart locks automatically disengage when a phone with a digital key is near. They allow for remote operation, unlimited keys for family and friends, and notify you of activity at your home.  

Control your home’s lighting wirelessly, including lighting intensity, color and scheduling.

Smart open/close sensors for windows, doors, and cabinets can text and inform you of a breach, and when used in conjunction with other home automation products, can even turn on lights, adjust the thermostat, and more.

Plug smart outlets directly into existing wall outlets for remote on/off operation, create a schedule, and track power usage of plugged-in appliances.

As technology rapidly advances and becomes affordable, upcoming Smart Home Technology is sure to be limited only by our imaginations. Visit our website or give us a call to find out about how we can help you capitalize on home automation opportunities today! The future is waiting…

Part of the recent trend to go eco-friendly has been the emergence of electrical cars. Electrical cars emit no pollution and eliminate trips to the gas station, saving you money. Instead of going to the gas station though, you will need to find another destination to top up your new vehicle electric car’s batteries. Installing a car charger in your home makes it convenient and efficient to fill up every day.

Most electrical vehicles can be charged over the course of a night. For those commuting daily with an electrical vehicle, this ensures that you are charged and ready to go every morning. A car charger is likely to be installed at the location where the car is parked for the night. This is likely either in a carport or garage, but this doesn’t mean it cannot be installed outside. If you decide that the best location for your charger is not a covered area, (this may be the case for a housing complex installing a station), make sure that you purchase an outdoor charger.

When you are ready to purchase your indoor or outdoor charger, review your vehicle’s owner manual for the recommended charger requirements. The car may require either a level 1 or a level 2 charger and should specify a recommended voltage and amperage. Chargers can be purchased at a variety of different retailers. Some cars come standard with a 120V charger or a faster 240V charger. Once you have determined the specifications for your charger you can purchase the right one for your vehicle.

Electrical car chargers can be used on standard 120V outlets, but for faster charging, 240V chargers can be purchased. Even if the charger you purchased can be plugged into a standard outlet, it is recommended that you have your outlet and wiring inspected by a professional. The charging will increase the load on your electrical system. If your wiring, breaker or electrical meter is too old, you could run into issues. It is advised that if you are using a 240V charger, a dedicated circuit is installed for it.

If you are interested in having an electric car charging station installed in your home, contact Expert Electric. We can help identify the requirements and ensure that your home is prepared to charge your new vehicle.

Many homeowners carry out electrical upgrades in their home and they get the fixtures and fittings replaced. At times, switchboards etc. may be replaced or circuit breakers too. However there is one component of electrical installations that is typically out of sight, out of mind – wiring!

We at Allround Electrical always recommend to our clients that if their home and the wiring in it, is over two decades old, they should consider getting wiring upgrades done on their property. In fact, when you choose to upgrade the wiring in your home, it gives you the assurance that the system will be able to bear the load of all the electrical appliances that you add to the different circuits on your property.

It’s a good idea to plan wiring upgrades at the same time that you plan remodeling projects; this is when you might open up walls and ceilings anyways; and this reduces the hassle, expense and time spent on getting this work done. This is because most of the electrical wiring is fitted within your walls; and it often involves opening up various wall sections, that will later have to be patched & repainted.

This is why it’s important that you plan for current and future requirements; this will ensure that you don’t have to worry about the wiring upgrades for at least a few more years. So, what is it that makes wiring such an important aspect of the electrical installation on your premises? Wiring supports a range of critical functions including:

When you are getting any of these jobs done, it’s crucial that you hire the services of an expert and experienced electrical company for the job. They will ensure that high grade, appropriate materials are used in the work and that the workmanship is of the highest grade too. While you are getting this job done, there are certain things you should be doing, such as:

These are just some of the basic aspects that have to be attended to when electrical upgrades are being done in your home. When you hire the services of a vetted and credible electrical contractor, you have peace of mind that the job will be handled in the best possible way.

For more information, simply speak with the experts at Allround Electrical and take our advice on various aspects of electrical and wiring installations. The number to call is – 1300 169 263. You can also write to us at this email address.

Thanks for reading,1300 169 263

Click To Tweet

This issue almost exclusively applies to instructions on how to safely repair it.

The average rated life of a light bulb represents how long it took for half of the bulbs to fail during testing (given perfect conditions). If your bulb lasted 12,315 hours (you counted!) but the label touted an average rated of life of 20,000 hours, you’re actually still within range of an acceptable life span.

We measure LED bulbs a bit differently since they never technically burn out, but rather fade over time. Instead, the Lighting FactsTM label indicates LED lumen maintenance (LM), which is an estimate of the bulb’s lumen depreciation over a given time.

Solution: Understand that the expected lifespan of your light bulb is simply an estimate based on testing that was performed in a controlled environment. When a bulb burns out earlier than that estimate, it doesn’t always mean something is wrong with it.