Homes are built to last, there is no doubt about it, but sometimes, the little details in the home are not always quite so durable. Technology is constantly advancing and we are always learning new ways to build. Homes are built to be safer than they ever were in the past. Building codes and regulations are far more strict nowadays, which is a good thing. It means builders and contractors are being held to a higher standard. Older homes are still valuable and worthy of being taken care of and updated to meet today’s safety standards. An electrician in Santa Monica, like those at The Electric Connection, can help you make your old home a safe place to live.

Wiring that was put into houses more than 50 years ago wasn’t made to last. Cloth insulated wiring was regularly used in home building into the 1950s. The cloth has proven to be frail and decays over time. As it decays and falls away, it leaves the wires it once insulated bare. A Santa Monica electrician, along with a team of trained electricians, can replace all of the wiring in a home to make it safe again. It is an extensive process, but once the wiring has been updated, you can expect your homeowner’s insurance to be much lower.

If you are not sure what kind of electrical wiring you have in the home, you can call for an inspection by an electrician. Santa Monica homeowners don’t have to guess about what is behind their walls. An inspection will tell you exactly what you are dealing with. There is a chance some of the wiring has already been updated. Give The Electric Connection a call today and schedule your electrical wiring inspection so you know what needs to be done to make your home safe.

Restrained ornamentation and a refined decorative look is the order of the day for Crystal lighting. Fixtures in this class usually have a smaller scale compared to the more Baroque-era grandiose fixtures with more excessive design elements.

Often times; Crystal lighting styles will have distressed tones that resemble their vintage-style lighting counterparts, but with heavier design elements and more intricate detail while using crystal as an accent to project the light in a visually pleasing pattern. An intricate pattern in an antique bronze finish with crystal inlays without invoking the more flared styling that is typical of earlier period lighting is a great example of Crystal lighting.

Older homes generally have a character quality that can’t be seen in newer houses. These homes offer great value, and renovation improvements can bring new life into them. Unfortunately often enough the electrical wiring is never inspected during these updates for years at a time. To ensure that all your hard work is going to be safe, look for these common dangers that could threaten your older home.

From the 50s to 70s many homes were built with aluminum wiring. This was used because it was cheaper and more conductive than copper wiring. Unfortunately many pitfalls were found with aluminum wiring after it was used. Overheating and cracking are common problems with aluminum wiring. If your home was built in this time period, have your wires inspected. There could be a number of hazardous points behind your walls that may cause major issues. For more information and hazard signs of aluminum wiring, read our blog article.

Knob and tube wiring was used in homes in the early 1900s and even as early as 50 years ago. It is possible that these homes still contain knob and tube wiring in them. This wiring can be dangerous as it is more likely to crack and result in electrical fires.

The dangers of these two out-dated wiring systems are that they were installed without worry and the problems were not realized until years later. The electrical wiring systems in these homes were left untouched and so did the problems that came with them. Electrical fires, are especially dangerous as the fire starts and spreads quickly and out of sight. By the time the fire is visible it is too late and the damage can be done.

Over the years homes can see additions: new rooms added onto the home, new electrical lines added, hot tubs, etc. If a licenced electrician did not perform these additions there can be a mess of wire connecting the additions to the original home. This problem comes to a head at the service panel. If it is not properly maintained the breaker will trip constantly and electrical outlets will be overloaded. This is very dangerous as the electrical panel is in charge of keeping your home safe from electrical hazards. It is very important that the electrical panel is upgraded in order to provide the correct control of electricity throughout the entire house, old and new. This also means the panel is properly labelled so it is easy to maintain if further updates are being made.

While there is nothing wrong with purchasing an older home, we recommend that a licenced electrician inspect the electrical system in order to identify potential electrical hazards. One of our expert electricians can provide you with a list of items that should be handled. This will help you have peace of mind that your family is safe in their home.

The energy saving power of lighting has quickly grown over the years, and still is to this day. In the commercial and industrial lighting space, a lot of companies are making the switch over from older technology lighting fixtures like metal halide and other HID lights over to LED fixtures.

On top of the energy savings LED can bring over older types of lights, commercial dimmers can yield even great energy reduction and thus a greater reduction in your facilities utility bills month to month.

So what is a dimmer, do dimmers save energy, and should I use a dimmer switch? Let’s find out!

A dimmer switch for LED lights gives you the control through a simple panel to change the amount of light that a lighting fixture (or fixtures) produces. You can dim lights as low as you so desire or as high as your light was designed to allow.

By having a commercial dimmer switch at your disposal, you can change the lights to match the mood, atmosphere, or even time of day to your needs and facilities guidelines.

Now onto the question you’ve all been waiting for, do commercial dimmer switches save energy?

The short answer is yes, dimmer switches do save you energy. But let’s discuss the history of dimmer switches and how far they have came.

Back in the day LED dimmer switches did not reduce energy because of the way they worked. Instead of reducing the amount of energy being used, they simply converted the energy not being used into heat instead of full illumination capability of the light bulb. Nowadays, dimmer switches for LED lights work by actually reducing energy used and only uses enough energy that it needs to power the light bulb at the setting of your dimmer.

Some of today’s dimmer switches use something called a “Triac Switch.” This Triac Switch works by cutting off power to the light fixture up to 120 times (variable) per second. Thus, the human eyes cannot detect a flickering and just see’s a constant flow of light. But while triac switches are used for smaller bulbs, bigger lighting fixtures use something called a send us a message and we will for sure help you out with that decision!