Sometimes, an electrical emergency can’t wait; sometimes, you need a 24-hour electrician to stop in as soon as possible. Here’s a look at some electrical emergencies that require immediate attention.

Before you call a certified electrician, check to see if the breaker is tripped. If the breaker is tripped, go to the thermostat and turn off the heating and cooling unit. After you have turned off the thermostat, go back to the breaker and turn the breaker all the way off before resetting it to the ‘on’ position. If the breaker trips again, call a 24-hour electrician. If it doesn’t trip, turn the thermostat back on. If the breaker trips once the AC is on, you will need to contact an AC repairman.

The Red Cross retweeted their appreciation to ElectricMan calling them their ‘heroes.’

If you’re experiencing an electrical emergency, please contact ElectricMan today. ElectricMan is a trusted, local 24-hour electrician with almost three decades of experience. For more information visit the ElectricMan website, and don’t forget to ‘like’ us on Facebook and follow us on Twitter. You can also find us on YouTube and Pinterest.

As there are performance standard. All lights that are DLC Qualified have been tested and meet or exceed these requirements. Most recently, DLC has created a higher performance standard, DLC Premium. With DLC Premium, the LED lights are among the most efficient available. For example, our LED Retrofit Kits are DLC Premium Listed, while many of our competitors’ products are only DLC Standard Qualified.

To you, the consumer, this means a DLC Premium retrofit solution will be 20-30% brighter and / or use 20-30% + less energy. Comparing our units at 165 lumens/watt versus a competitive product at 97 lumens per watt, their product requires 135 watts to produce the same amount of light our product needs barely over 75 watts to create. To you, this saves you thousands of dollars month after month. So while both carry the DLC qualification symbol, ours will save you much more every minute the light is turned on.

One of the benefits of retrofitting is you get to recapture the investment in your existing fixtures. Think of a car dealership. Many are beautiful architecturally designed fixtures and the dealership had spent a lot of money to have them installed. The owners would like to convert to LED, but installing a new fixture is not an ideal solution. First, the finished result would not look as aesthetically pleasing as the current appearance. Second, the investment in the existing fixtures would be ‘throw away’. With a LED retrofitting kit, think of the driver as the ballast replacement and the head as a replacement for the metal halide bulb.

Secondly, most of the times a retrofit kit solution is less expensive than a new fixture solution. So not only are you able to recapture your fixture investment, but converting to LED should be cheaper than replacing the fixture with a new LED fixture.

Being DLC Premium Qualified, each kit must be backed with a 5 year warranty. Since our heads are so designed so thermally efficient, the heads have been upgraded to a 10 year warranty. The drivers come with a standard 5 year warranty, but an optional 10 year warranty on the entire unit is available. This means that you should not have to worry about replacing metal halide bulbs and ballasts for 10+ years. For some of our customers, not replacing bulbs and ballasts is almost as if not more important than energy savings provided by converting over to LED.

Our most powerful kit produces close to 51000 lumens while only consuming 350 watts. We believe we have some of the most, if not the most, efficient retrofit kits on the market today. While others are capable of creating 51000 lumens, they need significantly more watts to be able to do so. This is important, because one of the reasons you are probably considering on converting to LED is to save money. But it would be wrong for you to think that all LED solutions are the same in terms of efficiency. Some of our competitor’s kits are rated at 97 and 110 lumens per watt. Our fifth generation of LED retrofit kits are rated up to 165 lumens per watt. This means our competitors are 50% less efficient than our latest models. Over the life of the LEDs, this means you electrical bills are going to be significantly higher than it needs to be. Yes, it will be lower than the current metal halide or high pressure sodium bulbs you may currently be using, but they will cost you significantly more to operate over our latest ultra-efficient retrofit solutions.

The most important thing to do is to match the correct retrofit kit with your existing lighting. We created 11 retrofit kits as part of our family of LED solutions, from 30 watts all the way to 350 watts. Each unit is designed to fit into your existing fixture without the need for taking down the fixture and sending it to use so we can create a custom plate. Some suppliers provide that as their solution. With our 11 retrofit kits, there is no need to take down a fixture and send it to our offices so that we can design you a retrofit plate. Retrofitting Content by MyLEDLightingGuide

Many people don’t even think twice about the fan in the bathroom. It seems like a standard fixture that should be a part of every home. When it isn’t, it is seen as more of an inconvenience than a necessity. The fan isn’t just for looks or an accessory. It is a vital piece of equipment that can keep your home safe from the damages of mold and mildew. If you don’t currently have a working fan in the bathroom, it is an easy fix with the help of an electrician. Burbank homeowners can call The Electric Connection to set up a bath fan installation.

Bath fans are not what they used to be. They are elaborate additions to a modern bathroom. Many include heat lamps that help replace the warm, moist air they are removing from the room. The fans are very quiet and are available in different speeds, depending on how big the room is. You can buy a fan at almost any home improvement store. An electrician in Burbank suggests you do some investigating to find the best fan for your bathroom. They are relatively inexpensive, which is pretty amazing considering how much money they can save you on repair costs from moisture damage.

A fan is a key component in your home. Each time you shower in the bathroom, you are putting a great deal of moisture in the air. This moisture clings to the ceiling, the floor and even the drywall. Your Burbank electrician explains that this repeated exposure to moisture can result in mildew and mold. Most people know mold is extremely dangerous and can end up costing thousands of dollars in remediation costs. Don’t let your home go another day without proper ventilation. Call The Electric Connection today and schedule your bath fan installation.