Photo via Kickstarter.com

Bosua didn’t design this light with merely lethargy in mind – its technological advancements also have the potential to improve your wellbeing. Here are a few things you can do with the LIFX:

While some of these features may seem silly or impractical (I’m sure not everyone reading this has robot dance parties on the regular) I believe there are 2 notable features that make this LED worth a try:

1. Energy Savings. For the equivalent brightness of a 60W incandescent, this light only uses about 10 watts of energy. Plus, by programming it to turn off when you’re gone and dim automatically, you can save even more energy with minimal effort. The creators also say the LIFX will last up to 25 years, so you won’t need to replace them for a very long time.

2. Changing Colors. While at first, turning your lights from blue to red to green might seem a little superfluous, if you spend long periods of time indoors under the same white, bright lights, it can start to mess with your circadian rhythms. Studies like Photo via Kickstarter.com

And if you ever lose your phone, don’t worry, because these lights still work with standard switches too.

The LIFX project is funded through Kickstarter, and light bulbs will start shipping in March of 2013.

Modern day living is highly reliant on the use of electricity and the different appliances, equipment and fixtures it powers. Industries are even more reliant on electricity and their profitability is closely knit with how seamlessly their systems operate. They rely on electricity to such an extent that they rarely give it a second thought; well, at least not until something goes wrong such as:

Most of these problems can be attributed to poor power factor. Let’s understand a little more about what that is.

Power factor is essentially a measure of how effectively the incoming power is being used by the electrical equipment on your premises. It is expressed in terms of a numerical value in the range of 0-1. A higher power factor indicates that the electrical equipment is being used more effectively.

For instance, if the power factor is 0.8, it indicates that 80% of the power supply to the equipment is being utilised effectively and that 20% is being wasted. Regardless of what this ratio of effective usage Vs wastage is, the latter is an unnecessary expense. Typically, your power factor should be closer to 1; it indicates that your site is using energy in an efficient manner.

A number of businesses are currently being charged a kVA tariff and not a kilowatt tariff. This means, your service provider is probably charging you for the power they supply to you, rather than that you actually use. Simply put, you are paying for power that is being supplied to you, but which is being wasted. If your business has a low power factor, it means you pay even more for this waste. There is another aspect you should keep in view. As mentioned at the start, poor power factor has the potential to cause power drops and power losses; in turn, these lead to motor failure and overheating and failure of other equipment too.

Installation of Power Factor Correction equipment might just help avoid prohibitively expensive infrastructure upgrades; it does this by reducing the current electrical demand on your system & improving the efficiency stability. Based on which tariff you are on, power correction might just prove to be an excellent way for your business to deescalate its electricity costs.

The power factor can be improved by installing Capacitor Banks. These are PFC (Power Factor Correction) equipment and help correct the inefficiencies in the energy supply. Apart from this, they also reduce the peak demand on the power network. This is an effective and cost-effective solution to reduce your power bill as it helps lower the monthly demand and the capacity charges. Generally, the payback periods for PFC are between 1 and 3 years. Taking the life span of the PFC equipment into consideration & the potential savings, this investment can prove to be very worthwhile for you.

If you feel that you are paying too much for electricity, we at Allround Electrical can conduct a survey of the equipment used on your site and map their electrical consumption against the power your plant is using and is being charged for. We will then provide you a report of what your power factor is; and if it is low, how it can be corrected. For more information, call us at 1300 169 263. You can also drop us a line via email.

Thanks for reading,1300 169 263

Around the world, every city offers something different. Though they all have hustle and bustle, lots of buildings, and usually traffic, when you’re on their streets you would never mistake San Francisco for Cairo, Toronto for Tokyo, or Berlin for Rio de Janeiro. But what about from space? During the day, these cities tend to blend in with their surrounding countryside. However, when lit up at night, it’s easy to see how varied these cities can be.

Is it possible to tell anything about the life and culture of our cities when viewing their lights from above? You might be surprised at how much.

Landmarks

Can you guess which cultural icon jumps out of this landscape?

Now, take a look at this photograph of Denver, a much newer city. The streets are mapped out in a much more orderly, grid-like way, aligned North-South and East-West.

The majority of urban areas in Tokyo use green mercury vapor lamps. Only the most newly built areas glow the standard orange.

Development

When examining a city’s lights from above, you can also learn about development, community growth, and infrastructure. Check out this unique photo of two cities from two countries side-by-side – the border towns Cuidad Juarez, Mexico and El Paso, Texas.