In our previous blog, the professionals at Electrical Gurus gave out some ways tips for increasing the safety of holiday decorations throughout the holiday season. Today, we’ll share even more ways to safely and effectively decorate your home this holiday season.

Even if the lights are unplugged when you’re hanging them (which is advised), be sure to never use nails, screws, or tacks to hang your Christmas lights; instead, opt for clips for interior and exterior applications. This will keep your wires from accidentally becoming nicked or frayed during or after the hanging process, which can get dangerous quickly.

Never use extension cords that don’t feature ground or are not rated for outdoor usage outdoors to avoid electrocution risk. Furthermore, it is especially advisable to only plug lights into GFCI outlets, especially if they are plugged into the exterior of your home. These outlets will essentially shut themselves off in the event of a short, which is crucial to avoiding safety concerns.

Always use timers for decorations and lights to prevent yourself from forgetting to turn them on or off. Lights should never be left on when nobody is home, which is why it is advisable to turn them off during daytime hours when the family is out-and-about. Timers keep your home safe by preventing power from flowing through the lights during the day, automatically activating them in the evening hours.

Large decorations, cords, and lights should all be kept well away from tripping hazards. Of special note is extension cords, which should never be allowed to cross walkways without proper coverage. Ideally, extension cords shouldn’t be run along open space in any way. If someone trips over one decoration, then odds are all attached decorations are at risk for getting dislodged or damaged.

If your home has the proper circuit breakers, there is little risk of a fire starting from overloading an outlet; that doesn’t mean it is wise to plug in numerous strands of lights into a single outlet. Spread the burden of lights and decorations across numerous breakers whenever possible to avoid taxing your electrical panel too much in certain areas. If your home is not equipped with a circuit breaker and still uses outdated fuses, please give us a call right away to talk about upgrading your panel.

We hope you’re safe this holiday season, but if you happen to overload your circuit breakers or have a concern about the lighting of your holiday decorations, be sure to give us a call right away. The electricians at Electrical Gurus want to help to keep every Des Moines family happy and healthy throughout the holiday season.

In some of our previous posts, you’ve likely seen our experts mention the presence of “ungrounded” outlets in homes and buildings. But what exactly makes an ungrounded outlet such a negative? Are they dangerous? Our certified electricians come to you today with answers to the real important questions regarding ungrounded outlets!

If you have ungrounded outlets and need an outlet upgrade, contact us today!

Ungrounded outlets are easily identified by simply taking a look at the face of the outlet (where you plug things in). On nearly all modern homes, there should be three holes. Two are the vertical slits, and one roundish one located underneath the pair of vertical ones. That’s a grounded outlet, which have been required by electrical safety standards for all structures since the mid-1960s.

Ungrounded outlets lack the third hole, the roundish one on the lower portion where the, somewhat obviously, ground plug goes.

To understand the why, you kind of have to understand what a grounded outlet does. The two vertical slots represent both a “hot” wire, and a “neutral” wire. The ground wire in a grounded outlet ties into the neutral vertical slot. Why the redundancy? Well, it acts like a failsafe. Should anything go awry with your outlet, such as a short, the renegade electricity simply travels safely along the ground wire back to the panel. Without the ground wire, that electricity can channel into materials, such as fabrics located close to the outlet, or a very unlucky person.

Is it dangerous in that it might jump out and bite you? No. Is it dangerous in that it dramatically increases personal and property risk? Yes, absolutely. Ungrounded outlets increase the chance of:

We’ve encountered a few arguments over the years about the safety of ungrounded outlets. Like how they were used just fine in the past, or how the home that has them hasn’t “burned down yet”, etc. Well, that’s just the thing. Yet.

We haven’t been hit by a car, but that doesn’t mean we should go walking down the center of a busy highway at midnight. Grounded outlets became a standard in electrical code for a reason. They prevent possible problems that homes consistently encountered in the past. It’s all about preparedness and prevention!

So to conclude, are ungrounded outlets dangerous? Yes, they represent a very real potential risk. Worried that you may have ungrounded outlets in your home or business? Contact the certified master electricians at Kolb Electric today! We’ve been bringing our consumers the very best in electrical advice and service for years, and your complete satisfaction and safety are always our top priority!

The concept of fuel cells as an energy source is credited to a chemist, William Grove. He demonstrated in 1839 that electric current could be produced by an electrochemical reaction between hydrogen and oxygen over a platinum catalyst. Thereafter, many alternate forms of the technology emerged for producing electricity from various materials and catalysts.

The main reason why fuel cell companies have not been profitable is due to startup and operational costs. Although fuel cells provide clean, inexpensive energy, it is much simpler to use coal or natural gas. These industries have been around for a long time, so their processes are now streamlined.  Unless legislative action requires the use of clean energy, the adoption of fuel cells will remain slow.

Fuel cells are attractive for energy production because they provide clean energy, with no harmful byproducts. Although commercial adoption of fuel cells remains slow, it is possible that the technology could become disruptive and make a significant impact on the energy industry. That could happen if environmental pollution due to the burning of fossil fuels becomes a global concern. So far, large countries that account for a great deal of pollution, such and China, have been indifferent about the pollution they cause.

Electricity is a valuable part of our world today. We use it for just about everything. Without electricity, we would struggle to get through a single day. With that said, electricity can be extremely dangerous, deadly even. There are some electrical hazards you need to be aware of, teach your children and keep top of mind as you go through your daily routines. Becoming complacent around electricity can be extremely hazardous. Your Burbank electrician has some tips to understanding electrical hazards and how to avoid them. You can count on the crew at The Electric Connection to keep you informed about electricity and the potential hazards it poses.

1-Extension cords are not meant to be long-term solutions. They are simply meant for temporary fixes while you use a particular appliance. Extension cords are the cause of over 300,000 fires every year due to improper use. If you need an additional outlet, whether it is in the house or outside, call an electrician. Burbank homeowners don’t have to put their homes at risk by using extension cords as permanent fixes.

2-Pets and young kids and electricity never mix. Do what you can to keep children away from outlets and pets away from cords. You can buy cord protectors to keep pets from chewing on the lamp cord and outlet protectors to keep children from putting things into the outlets. These are quick, inexpensive fixes that can save lives.

3-Water is probably one of the most obvious dangers when electricity is around. You can protect yourself by having GFCI installed in kitchen and bathroom areas where water is most likely to be introduced to an electrical current. This is a simple fix that can be taken care of by your electrician.

Give The Electric Connection a call today to take care of any electrical hazards in your home.